Pioneer SGY-PM68 Bruksanvisning
Pioneer
Cykeldator
SGY-PM68
Läs gratis den bruksanvisning för Pioneer SGY-PM68 (20 sidor) i kategorin Cykeldator. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 2.5 recensioner. Har du en fråga om Pioneer SGY-PM68 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/20
Quick Guide
New Installation Procedure
• A new installation procedure is available for SGY-PM90 and
SGY-PM68 Series cranksets.
• The newest firmware for the SGX-CA500 is required for use with
these cranksets 2.43 –
• Compatible cranksets will have an orange sticker on the box and
another on one of the crank arms.
• An updated owners manual will be included in those systems.
• Units not displaying this orange sticker should follow the
installation instructions found in the owners manual provided with
that product.
• The new installation procedure does not provide any
performance enhancements to the product.
• Installation procedures on pages 3 and 4 of this Quick Guide are
for this new procedure.
Easy Installation Power Meter Cranksets
SGY-PM90 and SGY-PM68 with Non-Pioneer ANT+ Cycle Computer
1.) Magnet Placement
•Measuring from the center of the bottom bracket out,
temporarily tape the magnet so that the center line of the
magnet is:
• Right Drive Side - 42mm
• Left Side - 53mm
•Use the supplied Magnet Placement Template to help locate
the optimum locations for magnet placement on the frame.
•Position the magnets so the sensor line and magnet center
line are parallel when the sensor passes over. Center hole on bottom bracket and use supplied
double sided tape to temporarily secure while locating
optimum magnet location
Sensor Line:
Magnet
Center
Line: Magnet Range
1.5mm – 10.7mm
Magnet Template
card
2.) Confirm Magnet Placement
•Remove and replace both Left and Right batteries. Orange light will appear for 10 seconds.
•Rotate the crank slowly (30rpm). Check that the LED on each sensor lights green once for each
revolution.
•Once confirmed, secure magnets for final placement. If no Green LED,
check and adjust
magnet placement
LED’s light green
3.) Pair to your ANT+ Computer
• Spin the crank 3 4 rotations to activate the Power Meter –
See your ANT+ Cycle Computer
Instructions for Power Meter Pairing and
Zero Calibration procedures.
ID 12345
Sensor ID
Left Sensor Arm
For additional Installation Instructions visit the following on-line support
locations
www.pioneerelectronics.com/PUSA/Cycle+Sports/Products/Power+Meters
www.Youtube/Pioneer Cycle Sports USA
Please refer to the owners manual for detailed installation instructions.
Visit https://cyclo-sphere.com/ for the latest firmware and updates.
Customer Support 1- - - –800 421 1624
E-Mail: cycle-sports@pioneer-usa.com
Produktspecifikationer
| Varumärke: | Pioneer |
| Kategori: | Cykeldator |
| Modell: | SGY-PM68 |
Behöver du hjälp?
Om du behöver hjälp med Pioneer SGY-PM68 ställ en fråga nedan och andra användare kommer att svara dig
Cykeldator Pioneer Manualer
27 Augusti 2024
3 Augusti 2024
1 Augusti 2024
1 Augusti 2024
31 Juli 2024
30 Juli 2024
29 Juli 2024
23 Juli 2024
22 Juli 2024
21 Juli 2024
Cykeldator Manualer
- Con-Tec
- Cannondale
- Cresta
- Garmin
- VDO Dayton
- Bafang
- Sunding
- Mio
- Silent Force
- Maxxus
- O-Synce
- IGPSport
- Btwin
- Bikemate
- Gazelle
Nyaste Cykeldator Manualer
31 Juli 2025
31 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025
24 Juli 2025
8 Juli 2025
8 Juli 2025
8 Juli 2025
7 Juli 2025