Planet IKVM-210-16 Bruksanvisning


Läs gratis den bruksanvisning för Planet IKVM-210-16 (39 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 8.5 recensioner. Har du en fråga om Planet IKVM-210-16 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/39
8- -p/16 ort Combo KVM
8- -p /16 ort Combo IP KVM
IKVM/KVM-210 Series
8- - /16 port Combo KVM Switch
IKVM/KVM- 210 Series
- - 2
Copyright
Copyright 201 7 by PLANET Technology Corp. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of PLANET.
PLANET makes no representations or warranties, either expressed or implied, with respect to the
contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular
purpose. Any software described in this manual is sold or licensed "as is". Should the programs prove
defective following their purchase, the buyer (and not PLANET, its distributor, or its dealer) assumes the
entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting
from any defect in the software. Further, PLANET reserves the right to revise this publication and to
make changes from time to time in the contents hereof without obligation to notify any person of such
revision or changes.
All brand and product names mentioned in this manual are trademarks and/or registered trademarks of
their respective holders.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
To assure continued compliance, use only shielded interface cables when connecting to computer or
peripheral devices. Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
8- - /16 port Combo KVM Switch
IKVM/KVM- 210 Series
- - 3
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Federal Communication Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In
order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to
the antenna shall not be less than 20 cm (8 inches) during normal operation.
Safety
This equipment is designed with the utmost care for the safety of those who install and use it. However,
special attention must be paid to the dangers of electric shock and static electricity when working with
electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed
at all times to ensure the safe use of the equipment.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio interference, in
which case the user may be required to take adequate measures.
WEEE Regulation
To avoid the potential effects on the environment and human health as a result of the
presence of hazardous substances in electrical and electronic equipment, end users of
electrical and electronic equipment should understand the meaning of the crossed-out
wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to collect such
WEEE separately.
Revision
Users Manual of PLANET ort Combo KVM 8-/16-p
Model: 210 210 210 08 210 16KVM- -08 / KVM- -16 / I -KVM - -/ IKVM -
Rev: 1.00 (January, 2017)
Part No. 210 Series_v1.0.docEM- -KVM_IKVM
8- - /16 port Combo KVM Switch
IKVM/KVM- 210 Series
- - 4
Table of Contents
Chapter 1. Product Introduction ....................................................................................................... 5
1.1 Package Contents .................................................................................................................... 5
1.2 Overview .................................................................................................................................. 6
1.3 Features ................................................................................................................................... 9
1.4 Specifications .........................................................................................................................10
Chapter 2. Hardware Interface ........................................................................................................12
2.1 Physical Descriptions .............................................................................................................12
2.2 14 Hardware Installation .............................................................................................................
Chapter 3. Operations ......................................................................................................................17
3.1 Manual Key ............................................................................................................................17
3.2 Hotkey Switch ........................................................................................................................17
3.3 OSD (On Screen Display) ......................................................................................................18
3.3.1 GOTO ..................................................................................................................19
3.3.2 SCAN ...................................................................................................................19
3.3.3 20 LIST .....................................................................................................................
3.3.4 QV (Quick View) ..................................................................................................21
3.3.5 EDIT .....................................................................................................................21
3.3.6 SET ......................................................................................................................22
Chapter 4. IPKVM Software (For IKVM Series) ..............................................................................24
4.1 Requirements System ............................................................................................................24
4.2 IPKVM Software Installation ...................................................................................................24
Chapter 5. Web-based Management (For IKVM Series) ...............................................................27
5.1 Mouse settings .......................................................................................................................27
5.2 31 Network connection................................................................................................................
5.3 Web Managenent ...................................................................................................................32
5.3.1 Console ................................................................................................................32
5.3.2 User 34 .....................................................................................................................
5.3.3 Log .......................................................................................................................35
5.3.4 Network ................................................................................................................35
5.3.5 System .................................................................................................................37
Appendix A: Frequently Asked Questions ........................................................................................38
8- - /16 port Combo KVM Switch
IKVM/KVM- 210 Series
- - 5
Chapter 1. Product Introduction
1.1 Package Contents
The package should contain the following:
Combo KVM Switch x 1
Quick Guide x 1
IP installation Guide x 1 (For IKVM Series)
KVM Cable x 1
- K Rack mounting it x 1
Power Adapter x 1
If any of the above items are missing, please contact your seller immediately.
8- - /16 port Combo KVM Switch
IKVM/KVM- 210 Series
- - 6
1.2 Overview
Easily Control Servers with Flexibility
PLANET offers an ideal enterprise 8 port KVM switch solution for company server room or testing -/16-
facilities. The KVM features the patented design of the availability of USB and PS/2 interface -210 08/16-
connection, user-friendly OSD utility and daisy chain function. The KVM switch solution frees up more -
table and rack space for users in addition to saving the cost of multiple keyboards, mice and monitors.
Remotely Access your Servers from Anywhere (For IKVM Series)
PLANET offers an ideal enterprise 8 port KVM switch solution for company server room or testing -/16-
facilities. With the innovative IP based technology, PLANET has turned the traditional KVM switches -
into true networking devices. The IKVM captures, digitizes and compresses video signal, -210- 08/16
and then transmits it with keyboard and mouse signals through IP network. Multiple remote sites can
monitor the same PC server simultaneously.
8- - /16 port Combo KVM Switch
IKVM/KVM- 210 Series
- - 10
1.4 Specifications
KVM-210 Series Specifications
Product 210 08 210 16 -KVM - -KVM -
Hardware
Number of sub ports (15 sub ports (15Ports 8 D- -pin) 16 D- - pin)
Maximum 64 by 2-tier star type cascading -
(KVM- - 210 08 x 8)
256 by 2-tier star type cascading-
(KVM- - 210 16 x 16)
PC Ports
Keyboard PS/2 female + USB Type A female
Mouse PS/2 female + USB Type A female
Video D- - 8 sub ports (15 female) 16 D sub ports (15 female)
Console Ports
Keyboard PS/2 female + USB Type A female
Mouse PS/2 female + USB Type A female
Video D- 1 sub port (15 female)
LED
On Line 8 ( 16 (Red) Red)
Selected 8 ( 16 (Green) Green)
Button 1 reset button
8 select button
1 reset button
16 select button
Video Resolution 2048 x 1536
Housing Metal
Dimensions (W x D x H) 432 x 155 x 44 mm
Weight 2.22kg
Power Requirement 9V DC, 1A
Installation 1U rack-mountable, desktop
Management
PC Selection
Port select button
Hotkeys on keyboard
OSD (on screen display)
Scan Interval 5~60 seconds
Security User password andsuper password
Environment & Certification
Operating Temperature -10 ~ 50 degrees C
Operating Humidity 0 ~ 90%
Regulatory CE, FCC
8- - /16 port Combo KVM Switch
IKVM/KVM- 210 Series
- - 11
I -KVM 210 Series Specifications
Product
IKVM- - 210 08
Hardware
Number of Ports
8 D sub ports (15- -pin)
Maximum Control of PCs
64 by 2 tier star type cascading - -
(KVM- - 210 08 x 8)
PC Ports
Keyboard
PS/2 female + USB type A female
Mouse
PS/2 female + USB type A female
Video
8 D sub ports (15 female) -
Console Ports
Keyboard
PS/2 female + USB type A female
Mouse
PS/2 female + USB type A female
Video
1 D sub port (15 female) -
LED
On Line
8 (Red)
Selected
8 (Green)
Button
1 reset button
8 select buttons
Remote Console
1 RJ45 port for 10/100/1000BASE-T
Video Resolution
Local side: 2048 x 1536 (max)
Remote side: 1920 x 1080 (max)
Housing
Metal
Dimensions (W x D x H)
432 x 155 x 44 mm
Weight
2.22kg
Power Requirement
9V DC, 1A
Installation
1U rack-mountable, desktop
Management
Supported Protocol
TCP, IP, HTTP
Client Software
IPKVM Software
PC Selection
Port select button
Hotkeys on keyboard
OSD (on screen display)
Scan Interval
5~60 seconds
Security
User password and super password
DES, AES and 3DES
Environment & Certification
Operating Temperature
- 10 ~ 50 degrees C
Storage Temperature
- 20 ~ 60 degrees C
Operating Humidity
0 ~ 90%
Regulatory
CE, FCC
8- - /16 port Combo KVM Switch
IKVM/KVM- 210 Series
- - 13
Interface Description
Power Jack
The input power is 9V DC.
Use the power adapter included in the package; otherwise, it may
damage the unit and result in danger.
USB Port Plug USB keyboard and mouse in this port.
Computer Port Install the KVM cable connected to a PC here.
Console Ports
In the Master KVM, connect the monitor, keyboard and mouse here.
In the Slave KVM, connect the cable from the Master computer port here.
IP Module
Interface Description
LAN Port - - - One 10/100/1000BASE T RJ45 auto MDI/MDI X port.
Reboot Press and release to restart the system.
Reset Press for to reset to default. 5 seconds
8- - /16 port Combo KVM Switch
IKVM/KVM- 210 Series
- - 14
2.2 Hardware Installation
The Switch KVM provides a standard 19 e use the rack -inch rack for the installation of devices. Pleas
installation accessories attached with the product package. First install the accessories to the device
and then the device to the rack.
Step 1. Place your KVM Switch on a hard flat surface, with the front panel positioned towards your front
side.
Step 2. Attach a rack mount bracket to each side of the KVM Switch with supplied screws attached to -
the package.
1) You must use the screws supplied with the mounting brackets. Damage caused to the
parts by using incorrect screws would invalidate your warranty.
2) Please make sure computer and switch KVM are turned off.
Step 3. Secure the brackets tightly.
Step 4. Follow the same steps to attach the second bracket to the opposite side.
Step 5. After the brackets are attached to the Web Smart Switch, use suitable screws to securely
attach the brackets to the rack.
8- - /16 port Combo KVM Switch
IKVM/KVM- 210 Series
- - 16
The console section does not support hot plugging of PS/2 mouse and keyboard.
Step 8. Connect the mouse to the KVM Switch, via PS/2 or USB interface.
The console section does not support hot plugging of PS/2 mouse and keyboard.
Step 9. Install the Master KVM to the 3 1 cable (same as the cable for connecting the KVM to the PC) - -in
in the middle of the Slave KVMs.
Step 10. Double-check all of the connections. You can check the color of keyboard and mouse
connector to make sure the keyboard and mouse cables go to the correct ports.
Step 11. Attach the power supply to the KVM unit and plug the other end into an electrical receptacle.
Now you will see the LED for Port 1 light up. Switch on your monitor.
It is not necessary to power down the whole system for installing a new PC or KVM
thereafter. All you need is to make sure that the new g the PC or durinKVM is OFF
installation. If the powers down due to external such as power failure or KVM Factors (
the power of the is turned off recommend you to r the whole system.KVM ) , we einstall
8- - /16 port Combo KVM Switch
IKVM/KVM- 210 Series
- - 17
Chapter 3. Operations
There are three ways to switch PC. Please see the operation nstructions i below for more
understanding.
3.1 Manual Key
You just need to press the on the front panel of the KVM. The Port Select Button Selection LED
( )Green is on, indicating that you are switching to the corresponding port.
3.2 Switch Hotkey
Y ou can use the numeric keys to enter the direct switch. For example, if you want switch to to PC port 2,
you coul d press Ctrl + Ctrl + 2 and switch to PC port 2.
Scroll + Scroll + Num (Default setting)
Ctrl + Ctrl + Num
Alt + Alt + Num
Shift + Shift + Num
8- - /16 port Combo KVM Switch
IKVM/KVM- 210 Series
- - 19
3.3.1 GOTO
GOTO allows you to switch directly to a port either by keying in the ports name or its port number.
NAME: M ove highlight bar to NAME , press [Enter Enter], input name of a port, then press [and ] to
confirm.
PN: M ove highlight bar to PN”, press [Ente Enterr], input port number, and then press [ ] to switch. If
the port number is invalid, it will remind the user to input again.
3.3.2 SCAN
The SCAN function can automatically scan from the current ly ; selected port the scan interval can be set
by users. When scanning, a small window on the screen indicates the current port number. Press
[ Space] to stop scanning, and the KVM switches to the port last scanned.
8- - /16 port Combo KVM Switch
IKVM/KVM- 210 Series
- - 20
3.3.3 LIST
The LIST function lets you broaden or narrow the scope of which port the OSD displays on the main
screen.
Parameters Description
ALL Lists all of the ports on the installation.
QVIEW Lists only the ports that have been selected as Quick View Ports.
POWERED ON Lists only the ports that have their attached computers powered on.
POWERED ON +
QVIEW
Lists only the ports that have their attached computers powered on
and have been selected as Quick View Ports.
QVIEW + NAME Lists only the ports that have been selected as Quick View Ports and
have name.
NAME Lists only the ports that have names.
8- - /16 port Combo KVM Switch
IKVM/KVM- 210 Series
- - 22
3.3.6 SET
SET function configures the OSD menu. Move the highlight bar to an option, press [ ] to enter and Enter
a setting option.
Parameters Description
OSD ACTIVATING
HOTKEY Select OSD activating hotkey.
SWITCH HOTKEY Select the switch hotkey to switch PC.
CHANNEL DISPLAY
MODE
Mode of small tip window. Choices and meanings are below:
PN + NAME / PN / NAME
Move the highlight bar to an option and press [Enter] to select it.
CHANNEL DISPLAY
DURATION
Time the tip window last. Options are following:
3 SECOND The tip window lasts for 3seconds.
ALWAYS ON The tip window always on the screen.
Move the highlight bar to an option and press [Enter] to select it.
CHANNEL DISPLAY
POSITION
Position of the tip window.
A small blue window appears on the screen. Use arrow key to move
it, then press [ ] to specify the position.Enter
SCAN DURATION
Duration for scanning one port
Options are 3 seconds, 5 seconds, 10 seconds, 15 seconds, 20
seconds, 30 seconds, 40 seconds, 60 seconds. Move the highlight
bar to an option and press [Enter] to select it.
SET PASSWORD
Set new password. The password p ermission is for user.
First enter old password, then enter new password and confirm it.
The new password is set. If error occurs, the screen will remind
users.
8- - /16 port Combo KVM Switch
IKVM/KVM- 210 Series
- - 23
Parameters Description
SET SUPER
PASSWORD
Set new password. The password p ermission is for administrator.
First enter old password, then enter new password and confirm it.
The new password is set. If error occurs, the screen will remind
users.
CLEAR THE NAME
LIST
Clear the names of port list.
You need to enter password to clear the names of port list.
RESTORE DEFAULT
VALUE
Restore settings to default value.
You need to enter password to Restore settings to default value.
LOCK CONSOLE
Lock the console.
You cannot switch or scan after you lock the console (including
switch by pressing the button on the panel or OSD). You need to
enter password to set.


Produktspecifikationer

Varumärke: Planet
Kategori: Inte kategoriserad
Modell: IKVM-210-16

Behöver du hjälp?

Om du behöver hjälp med Planet IKVM-210-16 ställ en fråga nedan och andra användare kommer att svara dig