Polti Vaporetto 1500 Bruksanvisning
Läs gratis den bruksanvisning för Polti Vaporetto 1500 (13 sidor) i kategorin Ångtvätt. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 11.5 recensioner. Har du en fråga om Polti Vaporetto 1500 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/13
2
5
4
6
1
3
2A
R
S
T
5
6
4
11
11
9
11
15
13
12
11
11
9
10
8
9
117
14
20
11
17
19
11
16
22
23
24
18
Q
U
V
21
Fig. 1
Fig. 1
Fig. 6
Fig. 6
Fig. 3
Fig. 3
Fig. 2
Fig. 2
Fig. A
Fig. A
E
B
C
D
F
A
G
H
M
I
Fig. 4b
Fig. 4b
OFF
ON
Fig. 4a
Fig. 4a
Fig. 5
Fig. 5
GENERATOR
A) B) C)Patented Safety Cap; Generator on/off switch; Accessory on/off
switch
D) E)Central connector block with splash proof cover; Lock-in aperture
for central connector; Power supply cable; Carrying handle;F) G)
H) I)Pivoting wheels; Steam regulation control; Cable winderM)
ACCESSORIES
1) 2)Flexible hose; Steam gun; Safety switch; Steam request but-2A) 3)
ton; 4)Connector assembly; 5)Connector button; 6) Connector
locking tab; Extension tubes; Large brush; Cloth retaining clips;7) 8) 9)
10) 12)Brush fitting; 11)Accessories locking button; Small brush;
13) 14) 15)Cotton cloths; Filler funnel; Spare gaskets for accessory con-
nections;
ACCESSORIES SOLD SEPARATELY
16) 17)120° accessory; Small round brush for 120° accessory;
18) 19) 20)Window squeegee tool; Small blade for window tool; Large
blade for window tool; High pressure lance; Triangular brush;21) 22)
23) 24)Large round brush for 120° accessory; Wallpaper stripper tool;
* Iron; Q) R)Steam request button; S)Temperature regulation control;
T) U) V)Iron rest mat; Continuous steam jet button; “Iron heating” indica-
tor.
* (included for 1500 Kit)
This apparatus conforms with EC 89/336 directive modified by
93/68 (EMC) and 73/23 directive, modified by 93/68 ( low voltage)
POLTI S.p.A, reserves the right without prior notice to introduce techni-
cal and construction changes as it considers necessary.
P
P
P
PP
P
P
P
PP
R
R
R
RR
R
R
R
RR
E
E
E
EE
E
E
E
EE
C
C
C
CC
C
C
C
CC
A
A
A
AA
A
A
A
AA
U
U
U
UU
U
U
U
UU
T
T
T
TT
T
T
T
TT
I
I
I
II
I
I
I
II
O
O
O
OO
O
O
O
OO
N
N
N
NN
N
N
N
NN
S
S
S
SS
S
S
S
SS
KEEP THESE INSTRUCTIONS
• Read these instructions for use carefully before using the appliance.
• Any use which does not comply with these instructions will invalidate
the warranty.
• The wiring system to which the appliance is connected must always
comply with the laws in force.
• Before connecting the appliance, make sure that the mains voltage is
the same as the voltage indicated on the data label of the appliance and
that the power outlet is connected to earth.
• Always turn off the appliance at the on/off switch before unplugging it.
• If the appliance is left unused, always disconnect it from the mains.
Never leave the appliance unattended with the cable plugged into the
mains.
• Always make sure the appliance is unplugged before performing main-
tenance work of any kind.
• Do not pull the power cord out of the socket, but grasp the plug itself to
avoid damage to the socket.
• Do not allow the power cord to be twisted, crushed, stretched, or come
into contact with sharp or hot surfaces.
• Do not use the appliance if the power cable or other important parts are
damaged.
• Do not use electric extension leads that are not authorized by the
manufacturer, as they may cause damage or fire.
• If it is necessary to replace the power supply cable, please refer to the
nearest Polti authorised service centre, since the use of a special tool
is necessary.
• Never touch the appliance with wet hands or feet with the cable plug-
ged into the mains.
• Do not use the appliance when barefoot.
• Do not use the appliance near a bathtub, shower or container full of
water.
• Never immerse the appliance, the cable or the plugs in water or ano-
ther liquid.
• Use of the appliance in places where there is a danger of explosions is
prohibited.
• Do not use the product with toxic substances.
• Do not lay the hot appliance on surfaces sensitive to heat.
• Do not leave the appliance exposed to wind or rain.
• Do not place the appliance near a live element, an electric stove or any
other source of heat.
• Do not expose the appliance to extreme temperatures.
• Never let children or people who are not familiar with how the applian-
ce works use it.
• Do not press the buttons hard or with a pointed object such as a pen.
• Always rest the appliance on a stable surface.
• In case of accidental fall of the appliance it is necessary to have it chec-
ked by an authorized Service Centre as the internal safety features may
have been affected.
• In case of breakdown or malfunction switch off the appliance and never
attempt to disassemble it, but refer to an authorized Service Centre.
• In order to avoid prejudicing the safety of the appliance, use only origi-
nal spare parts and accessories approved by the manufacturer.
• Do not wind the power cord around the appliance, especially when the
appliance is still hot.
• During refilling with water, switch off and disconnect the appliance from
the mains.
• Do not direct the steam jet on electrical and/or electronic appliances.
• Let the appliance cool down before cleaning it.
• Before storing the appliance make sure that it has completely cooled
down.
• This appliance is equipped with safety devices which are to be replaced
only by a suitably qualified technician.
• Do not direct the steam jet at people, animals or debris.
• Never place your hands inside the jet of steam.
• When refilling the boiler, use HOT rather than cold water, pour in gen-
tly at first and keep your face away. Otherwise the still hot boiler walls
can spit drops of very hot water or steam spray.
• Do not put any detergent or chemical substance in the boiler. Water by
its nature contains magnesium, mineral salts and other deposits which
in hard water areas can contribute to limescale build up in the tank. To
avoid these problems, it is necessary to swill out with tapwater and
empty the generator tank after every 3 or 4 uses.In very hard water
areas we recommend the use of our KALSTOP FP 2003, a special
natural-base decalcifier which inhibits and b reaks down limescale,
making it easy to remove just by swilling out the tank with a little tapwa-
ter. This is a preventive against scale build-up and protects the metal
walls of the steam generator tank. KALSTOP is available from Polti
dealers or by mail-order from your Polti Service Centre.
•We recommend you use original Polti products only, as products
of other brands may not be suitable for use in Polti products and
could cause damage.
•Never use distilled water or scented water.
• Make sure the patented safety cap is fully and correctly screwed on,
otherwise you may experience very hot steam escaping from around
the cap.
• Do not refill the boiler while it is still hot. Allow it to cool down for a few
minutes before refilling.
• Do not empty the appliance when the water in the boiler is still hot.
• Do not try to unscrew the safety cap when the appliance is in use.
• Check the safety cap and that the related inner gasket is present, repla-
ce them with original spare parts if necessary.
• This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of expe-
rience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
• Children should be supervised to ensure that they do not play with the
appliance.
C
C
C
CC
C
C
C
CC
O
O
O
OO
O
O
O
OO
R
R
R
RR
R
R
R
RR
R
R
R
RR
R
R
R
RR
E
E
E
EE
E
E
E
EE
C
C
C
CC
C
C
C
CC
T
T
T
TT
T
T
T
TT
U
U
U
UU
U
U
U
UU
S
S
S
SS
S
S
S
SS
E
E
E
EE
E
E
E
EE
O
O
O
OO
O
O
O
OO
F
F
F
FF
F
F
F
FF
T
T
T
TT
T
T
T
TT
H
H
H
HH
H
H
H
HH
E
E
E
EE
E
E
E
EE
P
P
P
PP
P
P
P
PP
R
R
R
RR
R
R
R
RR
O
O
O
OO
O
O
O
OO
D
D
D
DD
D
D
D
DD
U
U
U
UU
U
U
U
UU
C
C
C
CC
C
C
C
CC
T
T
T
TT
T
T
T
TT
This appliance is intended for home use as a steam generator as descri-
bed and in accordance with the instructions provided in this manual.
Please read these instructions carefully and keep them, as you may find
them useful in future.
Polti declines liability for any damage or accident derived from any
use of VAPORETTO which is not in conformity with the instructions
contained in this booklet.
A
A
A
AA
A
A
A
AA
T
T
T
TT
T
T
T
TT
T
T
T
TT
T
T
T
TT
E
E
E
EE
E
E
E
EE
N
N
N
NN
N
N
N
NN
T
T
T
TT
T
T
T
TT
I
I
I
II
I
I
I
II
O
O
O
OO
O
O
O
OO
N
N
N
NN
N
N
N
NN
Directive 2002/96/EC (Waste Electrical and Electronic Equipment -
WEEE): information for users
This product complies with EU Directive 2002/96/EC.
The crossed-out wastebasket symbol on the appliance means
that at the end of its useful lifespan, the product must be dispo-
sed of separately from ordinary household wastes.
The user is responsible for delivering the appliance to an appro-
priate collection facility at the end of its useful lifespan.
Appropriate separate collection to permit recycling, treatment and envi-
ronmentally compatible disposal helps prevent negative impact on the
environment and human health and promotes recycling of the materials
making up the product. For more information on available collection faci-
lities, contact your local waste collection service or the shop where you
bought this appliance.
I
I
I
II
I
I
I
II
M
M
M
MM
M
M
M
MM
P
P
P
PP
P
P
P
PP
O
O
O
OO
O
O
O
OO
R
R
R
RR
R
R
R
RR
T
T
T
TT
T
T
T
TT
A
A
A
AA
A
A
A
AA
N
N
N
NN
N
N
N
NN
T
T
T
TT
T
T
T
TT
Before leaving our factory all our products are rigorously tested.
For this reason, your VAPORETTO may contain some residual
water in the boiler.
S
S
S
SS
S
S
S
SS
E
E
E
EE
E
E
E
EE
T
T
T
TT
T
T
T
TT
U
U
U
UU
U
U
U
UU
P
P
P
PP
P
P
P
PP
Before using VAPORETTO for the first time assemble the pivoting whe-
els as indicated in Fig. A.
P
P
P
PP
P
P
P
PP
R
R
R
RR
R
R
R
RR
E
E
E
EE
E
E
E
EE
P
P
P
PP
P
P
P
PP
A
A
A
AA
A
A
A
AA
R
R
R
RR
R
R
R
RR
A
A
A
AA
A
A
A
AA
T
T
T
TT
T
T
T
TT
I
I
I
II
I
I
I
II
O
O
O
OO
O
O
O
OO
N
N
N
NN
N
N
N
NN
F
F
F
FF
F
F
F
FF
O
O
O
OO
O
O
O
OO
R
R
R
RR
R
R
R
RR
U
U
U
UU
U
U
U
UU
S
S
S
SS
S
S
S
SS
E
E
E
EE
E
E
E
EE
1. Unscrew the patented safety cap ( ) and fill the boiler with about 1.3A
litres of water using the filler funnel ( ) making sure that it does not14
overflow (fig.1). Normal tapwater can be used. However, as water by
its nature contains limestone, which may cause a build-up of limesca-
le in the boiler, in hard water areas we recommend the use of our
naturalbase decalcifier KALSTOP FP 2003.
2. Carefully screw on the safety cap to hand tight (Fig. 2). Ensure the
ATTENTION:
Danger of burns!
Read these instructions carefully before using the appliance.
patented safety cap ( ) is fully and correctly screwed on, otherwiseA
you may experience steam escaping from around the cap.
3. Connect the power supply cable ( ) into an earthed power supply ofF
the correct voltage.
WARNING: Do NOT under any circumstances put or leave the filler fun-
nel in the water filling aperture of the appliance when the appliance is
connected to the mains electricity supply. Danger of burns!
I
I
I
II
I
I
I
II
N
N
N
NN
N
N
N
NN
S
S
S
SS
S
S
S
SS
T
T
T
TT
T
T
T
TT
R
R
R
RR
R
R
R
RR
U
U
U
UU
U
U
U
UU
C
C
C
CC
C
C
C
CC
T
T
T
TT
T
T
T
TT
I
I
I
II
I
I
I
II
O
O
O
OO
O
O
O
OO
N
N
N
NN
N
N
N
NN
S
S
S
SS
S
S
S
SS
F
F
F
FF
F
F
F
FF
O
O
O
OO
O
O
O
OO
R
R
R
RR
R
R
R
RR
U
U
U
UU
U
U
U
UU
S
S
S
SS
S
S
S
SS
E
E
E
EE
E
E
E
EE
1a. Press the generator on/off switch ( ) and the accessories on/offB
switch ( ) which will light up.C
2a. Open the cover of the central connector block ( ) and insert the con-D
nector assembly ( ) pressing the connector button ( ) taking care that4 5
the locking tab ( ) is correctly positioned in the lock-in aperture ( ) on6 E
the block (Fig. 3).
3a.Wait for the generator on/off switch (B) to go out. VAPORETTO
is now ready for use.
4a. The steam gun ( ) is equipped with a safety switch ( ) which pre-2 2A
vents the accidental start of the steam jet by children or people who
do not know how to operate the appliance.
With the switch ( ) in the “OFF” position, the lever controlling the2A
steam jet is locked (Fig.4b). Should the hose be left unattended for a
moment whilst the appliance is connected to the mains, it is recom-
mended to put the safety switch in the “OFF” position. To start wor-
king, set the ( ) button to the “ON” position and press the steam but-2A
ton (Fig.4a).
The first burst of steam may contain some water droplets, due to
imperfect thermic stabilisation inside the flexible hose. We would
therefore advise that the first jet of steam is played onto an old
cloth until a constant pressure of steam is obtained.
Note: BThe generator on/off switch ( ) may go on and off from time to
time during use of VAPORETTO. This indicates the machine is main-
taining the correct and constant pressure and is quite normal.
S
S
S
SS
S
S
S
SS
T
T
T
TT
T
T
T
TT
E
E
E
EE
E
E
E
EE
A
A
A
AA
A
A
A
AA
M
M
M
MM
M
M
M
MM
R
R
R
RR
R
R
R
RR
E
E
E
EE
E
E
E
EE
G
G
G
GG
G
G
G
GG
U
U
U
UU
U
U
U
UU
L
L
L
LL
L
L
L
LL
A
A
A
AA
A
A
A
AA
T
T
T
TT
T
T
T
TT
I
I
I
II
I
I
I
II
O
O
O
OO
O
O
O
OO
N
N
N
NN
N
N
N
NN
F
F
F
FF
F
F
F
FF
E
E
E
EE
E
E
E
EE
A
A
A
AA
A
A
A
AA
T
T
T
TT
T
T
T
TT
U
U
U
UU
U
U
U
UU
R
R
R
RR
R
R
R
RR
E
E
E
EE
E
E
E
EE
Some VAPORETTO models come equipped with a steam regulator con-
trol ( ) (Fig 5). You can use this control to increase the steam flow by tur-I
ning in an anti-clockwise direction. Turning the control in a clockwise di-
rection reduces the steam flow. Here are some suggestions for the
choice of steam flow level:
Strong steam: For encrusted dirt, stains, sanitising, grease
Normal steam: For carpets, rugs, glass, tiles etc.
Delicate steam: For vaporising plants and cleaning delicate fabrics,
upholstery, wallpaper etc.
C
C
C
CC
C
C
C
CC
O
O
O
OO
O
O
O
OO
N
N
N
NN
N
N
N
NN
N
N
N
NN
N
N
N
NN
E
E
E
EE
E
E
E
EE
C
C
C
CC
C
C
C
CC
T
T
T
TT
T
T
T
TT
I
I
I
II
I
I
I
II
O
O
O
OO
O
O
O
OO
N
N
N
NN
N
N
N
NN
O
O
O
OO
O
O
O
OO
F
F
F
FF
F
F
F
FF
T
T
T
TT
T
T
T
TT
H
H
H
HH
H
H
H
HH
E
E
E
EE
E
E
E
EE
A
A
A
AA
A
A
A
AA
C
C
C
CC
C
C
C
CC
C
C
C
CC
C
C
C
CC
E
E
E
EE
E
E
E
EE
S
S
S
SS
S
S
S
SS
S
S
S
SS
S
S
S
SS
O
O
O
OO
O
O
O
OO
R
R
R
RR
R
R
R
RR
I
I
I
II
I
I
I
II
E
E
E
EE
E
E
E
EE
S
S
S
SS
S
S
S
SS
All the accessories of VAPORETTO can be connected to the handle or
to the extension tubes as follows (fig.6):
1b. Move the accessories locking button ( ) on every accessory to the11
“OPEN” position.
2b. Attach the required tool to the hand gun or to the extention tube.
3b.Move the accessories locking button ( ) back to the “CLOSED” posi-11
tion.
4b. Check that the connector button has engaged and the accessory is
fully connected.
P
P
P
PP
P
P
P
PP
A
A
A
AA
A
A
A
AA
T
T
T
TT
T
T
T
TT
E
E
E
EE
E
E
E
EE
N
N
N
NN
N
N
N
NN
T
T
T
TT
T
T
T
TT
E
E
E
EE
E
E
E
EE
D
D
D
DD
D
D
D
DD
S
S
S
SS
S
S
S
SS
A
A
A
AA
A
A
A
AA
F
F
F
FF
F
F
F
FF
E
E
E
EE
E
E
E
EE
T
T
T
TT
T
T
T
TT
Y
Y
Y
YY
Y
Y
Y
YY
C
C
C
CC
C
C
C
CC
A
A
A
AA
A
A
A
AA
P
P
P
PP
P
P
P
PP
/
/
/
//
/
/
/
//
’
’
’
’’
’
’
’
’’
’
’
’
’’
’
’
’
’’
W
W
W
WW
W
W
W
WW
A
A
A
AA
A
A
A
AA
T
T
T
TT
T
T
T
TT
E
E
E
EE
E
E
E
EE
R
R
R
RR
R
R
R
RR
O
O
O
OO
O
O
O
OO
U
U
U
UU
U
U
U
UU
T
T
T
TT
T
T
T
TT
’
’
’
’’
’
’
’
’’
’
’
’
’’
’
’
’
’’
The appliance is equipped with a safety cap, which prevents opening of
the boiler as long as there is any pressure remaining inside. This is an
important and indispensable safety device, and it is necessary to follow
certain procedures when re-filling the boiler. Whenever you have used
up all the water in the boiler, proceed as follows:
1c.Switch off the machine at the generator on/off switch (B)
2c.Press the steam request button ( ) on the steam gun ( ) or, if using3 2
the iron, the steam request button ( ) on the iron ( ) so as to fullyR Q
exhaust the steam supply from the boiler.
3c.Switch OFF the accessory on/off switch (C).
4c.Disconnect the power supply cable ( ) from the mains.F
5c.Unscrew anti-clockwise the patented safety cap (A)
6c.Wait for a few minutes to allow the boiler to cool down.
7c.When cool, proceed to carefully refill the boiler as described in para-
graph 1 of the section “Preparation for Use”. If refilling the boiler when
not completely cooled, we recommend that you carefully pour only
very small quantities of water at each pouring into the boiler, so as to
avoid spitting from the boiler and cover exposed skin whilst filling.
U
U
U
UU
U
U
U
UU
S
S
S
SS
S
S
S
SS
E
E
E
EE
E
E
E
EE
O
O
O
OO
O
O
O
OO
F
F
F
FF
F
F
F
FF
T
T
T
TT
T
T
T
TT
H
H
H
HH
H
H
H
HH
E
E
E
EE
E
E
E
EE
P
P
P
PP
P
P
P
PP
R
R
R
RR
R
R
R
RR
O
O
O
OO
O
O
O
OO
F
F
F
FF
F
F
F
FF
E
E
E
EE
E
E
E
EE
S
S
S
SS
S
S
S
SS
S
S
S
SS
S
S
S
SS
I
I
I
II
I
I
I
II
O
O
O
OO
O
O
O
OO
N
N
N
NN
N
N
N
NN
A
A
A
AA
A
A
A
AA
L
L
L
LL
L
L
L
LL
I
I
I
II
I
I
I
II
R
R
R
RR
R
R
R
RR
O
O
O
OO
O
O
O
OO
N
N
N
NN
N
N
N
NN
(
(
(
((
(
(
(
((
i
i
i
ii
i
i
i
ii
n
n
n
nn
n
n
n
nn
c
c
c
cc
c
c
c
cc
l
l
l
ll
l
l
l
ll
u
u
u
uu
u
u
u
uu
d
d
d
dd
d
d
d
dd
e
e
e
ee
e
e
e
ee
d
d
d
dd
d
d
d
dd
f
f
f
ff
f
f
f
ff
o
o
o
oo
o
o
o
oo
r
r
r
rr
r
r
r
rr
1
1
1
11
1
1
1
11
5
5
5
55
5
5
5
55
0
0
0
00
0
0
0
00
0
0
0
00
0
0
0
00
K
K
K
KK
K
K
K
KK
i
i
i
ii
i
i
i
ii
t
t
t
tt
t
t
t
tt
)
)
)
))
)
)
)
))
1d. Connect the connector assembly at the end of the iron hose ( ) to4
the generator as shown in point 2a of the section “Instruction for Use”.
Before ironing a garment, it is always advisable to check the symbols
appearing on the label and the instructions provided by the garment
manufacturer.
STEAM IRONING
2d. For steam ironing, set the temperature regulation control ( ) to theS
position “COTTON - LINEN”.
3d.Wait for a few minutes until the “Iron heating” indicator ( ) goes out,V
to show that the soleplate of the iron has reached the required tem-
perature.
4d.Press the steam request button on the iron ( ) to allow the steam toR
exit. Release this button to stop the steam flow. At the first request,
steam may contain some water drops and we recommend therefore
that the first jet of steam is played onto an old cloth, and is not direc-
ted onto the garment to be ironed.
5d.The iron can also be used in a vertical position e.g. for removing crea-
ses from curtain, clothing etc.
6d.In order to have a continuous steam jet, move the button ( ) for-U
wards. Steam will keep on coming out, even releasing the button (R).
To interrupt the outlet, move the button ( ) backwards.U
DRY IRONING
7d.For dry ironing, press the accessory on/off switch ( ), regulate theC
temperature of the iron by turning the temperature regulation control
(S) to the required temperature for the fabric shown on the control
itself.
IMPORTANT
• If you iron sitting down, do not place your legs under the ironing board,
the steam can cause burns.
• Iron only on heat resistant surfaces and on surfaces that allow the
steam to escape e.g. mesh ironing boards.
• For iron rest mat replacement use only original spare parts.
• Check that the continuous steam request button ( ) is switched offU
before connecting the appliance to the mains.
T
T
T
TT
T
T
T
TT
I
I
I
II
I
I
I
II
P
P
P
PP
P
P
P
PP
S
S
S
SS
S
S
S
SS
F
F
F
FF
F
F
F
FF
O
O
O
OO
O
O
O
OO
R
R
R
RR
R
R
R
RR
B
B
B
BB
B
B
B
BB
E
E
E
EE
E
E
E
EE
T
T
T
TT
T
T
T
TT
T
T
T
TT
T
T
T
TT
E
E
E
EE
E
E
E
EE
R
R
R
RR
R
R
R
RR
U
U
U
UU
U
U
U
UU
N
N
N
NN
N
N
N
NN
I
I
I
II
I
I
I
II
T
T
T
TT
T
T
T
TT
P
P
P
PP
P
P
P
PP
E
E
E
EE
E
E
E
EE
R
R
R
RR
R
R
R
RR
F
F
F
FF
F
F
F
FF
O
O
O
OO
O
O
O
OO
R
R
R
RR
R
R
R
RR
M
M
M
MM
M
M
M
MM
A
A
A
AA
A
A
A
AA
N
N
N
NN
N
N
N
NN
C
C
C
CC
C
C
C
CC
E
E
E
EE
E
E
E
EE
WARNINGS
• For cleaning leather, wood or delicate fabrics especially dralon, vel-
vet and other pile surfaces, consult the manufacturer instructions.
Clean only by using the hand gun at a safe distance together with a soft
cloth and always do a test on a non visible part of the item first or on a
sample. Allow the test area to dry completely before observing results
and effects on surface or colour before proceeding to clean further
areas, ensuring that exactly the same distance and technique are
applied as for the test area. If in doubt, and on sensitive surfaces like
fabrics, leather and wood it is always better to ask advice from your
steam cleaner dealer.
• For cleaning take great care aswood surfaces (furniture, doors etc.)
a too long application of the steam could alter the waxed appearance,
the shine or the colour of the surfaces cleaned. We therefore recom-
mend you to apply the steam on such surfaces only for brief periods or
to clean these surfaces using a cloth first held in the steam. Please pay
particular attention while cleaning brick floors: a too long application of
steam could damage wax, brightness or colour of these surfaces.
• On delicate surfaces (e.g. synthetic materials, lacquered surfaces
etc.) we recommend that the small brush should always be covered
with at least two cloths to reduce the intensity of the steam, and with the
steam set at low level.
• If cleaning in particularly low temperatures preheat theglass surfaces
glass using the hand gun from about 50 centimetres distance from the
surface to be cleaned.
• For care of your vaporise at a minimum distance of 50 centime-plants
tres.
STEAM GUN (2)
The steam gun can be used directly on all spots requiring a stronger, clo-
ser treatment without connecting the brushes. The more resistant the
stain, the closer you should hold the gun, the steam pressure and tem-
perature being higher at the source. You should however always wipe
with a dry cloth (or a slightly abrasive sponge if the spot is a difficult one
to remove) after using the gun. The steam gun is particularly efficient at:
• breaking down rug and carpet stains before they are treated with the
large brush;
• cleaning stainless steel surfaces, panes, mirrors, enamelled surfaces;
• cleaning hard-to-reach corners, such as stairs, window sills, door posts;
• cleaning window shutters, heaters, car interiors;
• spraying plants (from a distance);
• removing odours and creases from clothes.
To reach higher points, the steam gun can be connected to one or both
extension tubes.
LARGE BRUSH (8)
To wash floors, put a clean, dry kitchen cloth under the brush and swing
back and forth without applying any pressure. Use the other side of the
cloth when the first one is impregnated with dirt. Use the brush directly
without the cloth on particularly dirty or incrusted areas and in spaces
between the tiles: swing the brush sideways to detach the dirt. Highly
obstinate stains may require a steam gun treatment before the brush and
cloth are used (an old bath towel is an ideal cloth) . The same procedu-
res apply to ceilings and vertical surfaces, like wallpaper: in this case the
cloth can easily be fastened around the brush and held in place by the 4
clips ( ) on the brush itself. Smooth cotton cloths are suitable for the tre-9
atment of glass surfaces: fasten the cloth around the brush then pass it
Produktspecifikationer
| Varumärke: | Polti |
| Kategori: | Ångtvätt |
| Modell: | Vaporetto 1500 |
Behöver du hjälp?
Om du behöver hjälp med Polti Vaporetto 1500 ställ en fråga nedan och andra användare kommer att svara dig
Ångtvätt Polti Manualer
20 September 2024
15 September 2024
15 September 2024
15 September 2024
Polti Vaporetto Lecoaspira FAV70 Intelligence Bruksanvisning
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
Ångtvätt Manualer
- Aerian
- Mesko
- Steambuggy
- Goodway
- Camry
- Tower
- Thomson
- Oreck
- Kuppersbusch
- Kerrick
- Karcher
- Bestron
- Cecotec
- Severin
- Proline
Nyaste Ångtvätt Manualer
29 Mars 2025
10 Mars 2025
10 Mars 2025
28 Februari 2025
28 Februari 2025
26 Februari 2025
25 Februari 2025
12 Februari 2025
12 Februari 2025
11 Februari 2025