Porter-Cable PCE605 Bruksanvisning
Porter-Cable
Multiverktyg
PCE605
Läs gratis den bruksanvisning för Porter-Cable PCE605 (36 sidor) i kategorin Multiverktyg. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2.5 recensioner. Har du en fråga om Porter-Cable PCE605 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/36
3.0 Amp Oscillating
Multi-Tool
Instruction manual
Manuel d’instructions
Manual de’instrucciones
www.portercable.com
INSTRUCTIVO DE OPERACIÓN, CENTROS
DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA:
LÉASE ESTE
INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
CATALOG NUMBER
PCE605
Outil oscillant polyvalent
de 3,0 A
Multiherramienta oscilante
de 3,0 Amperios
It is important for you to read and understand this manual. The information it contains
relates to protecting The symbols
below are used to help you recognize this information.
Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a potentially haz ard ous situation which, if not avoided,
may result in minor or mod er ate injury.
Used without the safety alert symbol indicates potentially hazardous
situation which, if not avoided, may result in property damage.
Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
The term “power tool” in the warnings refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.
. Cluttered or dark areas invite accidents.
Power tools create sparks which may ignite the dust or fumes.
Distractions can cause you to lose control.
Unmodified plugs and matching outlets will reduce risk of electric shock.
There is an increased risk of electric shock if your body is
earthed or grounded.
. Water entering a power
tool will increase the risk of electric shock.
Damaged or entangled cords increase the risk of electric shock.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
Use of a GFCI reduces the risk of electric shock.
A moment of inattention while
operating power tools may result in serious personal injury.
Protective
equipment such as dust mask, nonskid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
Carrying power tools with your finger on the switch or energizing power tools
that have the switch on invites accidents.
. A wrench
or a key left attached to a rotating part of the power tool may result in personal injury.
This enables
better control of the power tool in unexpected situations.
Loose clothes, jewelry or long hair can be caught in moving parts.
Use of dust collection can reduce dust-related hazards.
The
correct power tool will do the job better and safer at the rate for which it was designed.
Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
Such preventive safety measures reduce the risk of starting the
power tool accidentally.
Power tools are dangerous in the hands of untrained users.
Many accidents are caused by
poorly maintained power tools.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
Use of the power tool for operations different from those intended could
result in a hazardous situation.
This will ensure that the safety of the power tool is maintained.
•
Cutting accessory contacting a “live” wire
may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
•
Holding the work by hand or against your body leaves it unstable and
may lead to loss of control.
•
Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live”
and could give the operator an electric shock.” Always check for hidden wiring, gas lines, or other
utilities before performing any material cutting or removal operations with the tool.
• . An exposed cutter may engage the
surface leading to possible loss of control and serious injury.
• Vibration caused by the operating action of
this tool may cause permanent injury to fingers, hands, and arms. Use gloves to provide extra
cushion, take frequent rest periods, and limit daily time of use.
• Keep proper footing and
balance at all times. This enables better control of the power tool in unexpected situations.
• Let the tool reach full speed and
carefully re-enter the cut.
• Do not attempt to make an
excessive depth of cut.
• Do not reach under the material being cut.
• Bent blade can break easily or cause kickback. Exercise
extreme caution when handling the accessories. The accessories are very sharp. Wear protective
gloves when changing cutting accessories. Accessories become hot after prolonged usage.
•
If there are nails, either remove them or set
them well below intended finished surface. Striking a nail with accessory edge could cause
the tool to jump.
Produktspecifikationer
| Varumärke: | Porter-Cable |
| Kategori: | Multiverktyg |
| Modell: | PCE605 |
| Färg på produkten: | Zwart |
| Årlig-energiförbrukning: | 156 kWu |
| Förpackningens bredd: | 1388 mm |
| Djuppackning: | 206 mm |
| Förpackningshöjd: | 867 mm |
| Energieffektivitetsklass (gammal): | A |
| Skärm diagonal: | 55 " |
| Upplösning: | 1920 x 1080 Pixels |
| Original bildförhållande: | 16:9 |
| Ljudformat som stöds: | AC3, MP3, OGG, WMA |
| Videoformat som stöds: | ASF, AVI, DIVX, FLV, H.264, MKV, MP4, MPEG, MPEG1, MPEG2, MPEG4, MPG, RM, TS, VC-1, VOB |
| Ethernet LAN: | Ja |
| Betraktningsvinkel, horisontell: | 178 ° |
| Betraktningsvinkel, vertikal: | 178 ° |
| Skärmform: | Flat |
| Ljusstyrka: | - cd/m² |
| Antal USB 2.0-portar: | 3 |
| VGA (D-Sub) port(ar): | 1 |
| Antal HDMI-portar: | 4 |
| Audio-ingan (L, R): | 1 |
| PC-ljud ingång: | Ja |
| Kompositvideoingång: | 1 |
| Komponenter för video (YPbPr/YCbCr): | 1 |
| Antal Ethernet LAN (RJ-45)-portar: | 1 |
| Smart TV: | Ja |
| Inbyggda högtalare: | Ja |
| Genomsnittlig effekt: | 20 W |
| Strömförbrukning (i standby): | 0.5 W |
| Antal högtalare: | 2 |
| Hörlursutgångar: | 1 |
| Strömförbrukning (när avstängd): | 0.47 W |
| HD typ: | Full HD |
| 3D: | Ja |
| Bildformat som stöds: | BMP, GIF, JPEG XR, JPG, PNG |
| Respons tid: | - ms |
| Grafikupplösningar som stöds: | 1920 x 1080 (HD 1080) |
| VESA montering: | Ja |
| Panelmonteringsgränssnitt: | 400 x 400 mm |
| Djup (utan bas): | 772 mm |
| Höjd (utan bas): | 285 mm |
| Bredd (utan bas): | 1238.6 mm |
| Vikt (utan bas): | 27000 g |
| PC-ingang (D-Sub): | Ja |
| Digitalt ljud, optisk utgång: | 1 |
| Common Interface Plus (CI+): | Ja |
| Typ av tuner: | Analoog & digitaal |
| Digitalt signalformat: | DVB-C, DVB-S2, DVB-T |
| Internet-TV: | Ja |
| Inbyggda ljudavkodare: | Dolby Digital |
| webbläsare: | Ja |
| Enhetsbredd (med stativ): | 1238.6 mm |
| Djupenhet (med stativ): | 713 mm |
| Enhetshöjd (med stativ): | 56 mm |
| Vikt (med stativ): | 32000 g |
| Digital Living Network Alliance (DLNA) certifierad: | Ja |
| Kvicksilverinnehåll: | 0 mg |
| Text-TV: | Ja |
| Bläddring: | Ja |
| Equalizerinställningar: | Ja |
| On Screen Display (OSD): | Ja |
| Antal skärmspråk: | 12 |
| Antal RF-portar: | 2 |
| Inbyggd uppdateringsfrekvens: | 400 Hz |
| Teknik för ljudavkodning: | Dolby Digital Plus |
| USB-inspelning: | Ja |
| Smarta lägen: | Hotel |
| Teletekst: | 1000 pagina's |
| 2D-3D-omvandlare: | Ja |
| Antal SCART-portar: | 1 |
| 3D-kompatibilitetstyp: | Actief |
| Grundläggande hotellläge: | Ja |
| Marknadsföringsnamn dynamiskt kontrastförhållande: | Mega Contrast |
| Kamfilter: | 3D |
| Utökad PVR: | Ja |
| Fjärrkontroll ingår: | Ja |
| Wifi: | Ja |
| AC-ingångsspänning: | 220 - 240 V |
| AC-ingångsfrekvens: | 50 Hz |
| Strömförbrukning (typiskt): | 140 W |
| Batterier-ingår: | Ja |
Behöver du hjälp?
Om du behöver hjälp med Porter-Cable PCE605 ställ en fråga nedan och andra användare kommer att svara dig
Multiverktyg Porter-Cable Manualer
21 September 2024
1 Augusti 2024
31 Juli 2024
Multiverktyg Manualer
- Cocraft
- Powerplus
- Baumr-AG
- CMT Orange Tools
- Meister Craft
- Gamma
- RIDGID
- Makita
- SKS
- Renovator
- Donau Elektronik
- Leatherman
- G-Technology
- Ryobi
- Trotec
Nyaste Multiverktyg Manualer
30 Mars 2025
29 Mars 2025
18 Februari 2025
3 Februari 2025
1 Januari 2025
31 December 2025
29 December 2024
29 December 2024
10 December 2024
9 December 2024