Posiflex BB-2000 Bruksanvisning

Läs gratis den bruksanvisning för Posiflex BB-2000 (12 sidor) i kategorin Tangentbord. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 3 recensioner. Har du en fråga om Posiflex BB-2000 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/12
1
Package Contents
BB- 2000
BB-2000 Bump Bar with PS/2 cable (x 1)
User Manual (x 1)
BB-2 S Bump Bar with RS-232 cable(x 1) 000
User Manual (x 1)
BB- U 2000
BB-2 U Bump Bar with USB cable (x 1) 000
User Manual (x 1)
19180900020 Ver. A0
http://www.posiex.com
-2000/2000S/2000U BB
Bump Bar User Manual
2
Views of BB-2000
Top View
Bottom View
Top View
Views of -2000S/2000UBB
Top View
Bottom View
Top View
Buzzer
Rack-mounting hole
Rubber Pad
Wa -mounting hole ll
Buzzer
Rack-mounting hole
Rubber Pad
Wall-mounting hole
Replaceable keypad overlay
Preprinted keypad overlay
3
Powering on BB-2000 Series
Before powering on BB-2000 series, the bump bar has to be connected to the
POS terminal using a USB cable or a RS-232 cable to extract electricity.
Please follow two steps below to install cables to POS terminals.
For BB-2000 users
1. Carefully attach PS/2 connector of PS/2 cable to the PS/2 Port of your
POS terminal.
2. After powering on the POS terminal, -2000 will be activated.BB
For -2000S users BB
1. Well insert the RS-232 cable to the POS terminal.
2. Activate power output to COM port via BIOS settings.
2.1. Make sure that -2000S is well connected to the Posiex terminals BB
using the RS-232 cabl e.
2.2. Power on the POS terminal. During the boot process, hit key to F2
access BIOS setting.
2.3. Navigate through BIOS using arrow and Enter keys to access the
setting of the COM port which is used by BB- . If it is set to be 2000S
disabled, hit key to enable the power output to the COM port Enter .
2.4. Switch to tab and select option. Choose Exit Exit Saving Changes
Yes in Setup Conrmation message box to save your congurations.
2.5. After rebooting your POS, make sure that - is activated. BB 2000S
For BB-2000U user s
1. Properly plug Type-A connector of USB cable to the POS terminal.
2. After powering on the POS terminal, -2000U will be activated.BB

Produktspecifikationer

Varumärke: Posiflex
Kategori: Tangentbord
Modell: BB-2000

Behöver du hjälp?

Om du behöver hjälp med Posiflex BB-2000 ställ en fråga nedan och andra användare kommer att svara dig