Power Dynamics ICS4 Bruksanvisning
Power Dynamics
högtalare
ICS4
Läs gratis den bruksanvisning för Power Dynamics ICS4 (12 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 26 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 13.5 recensioner. Har du en fråga om Power Dynamics ICS4 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/12
ICS Series Indoor Column Speaker 100V
Ref. nr.: 952.222; 952.224
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
V1.0
2
3
ENGLISH
Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in
order to benet fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.
Keep the manual for future reference.
- The unit contains voltage carrying parts. Therefore do NOT open the housing.
- Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the
ventilation es. hol
- The unit is not suitable for continuous use.
- If the lead damaged, must be replaced by a qualied technician. is it
- If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT
switch the unit on. Contact your dealer. Do.
- All repairs should be carried out by a qualied technician only.
- To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.
- Keep the unit out of the reach of children. Do not leave the unit unattended.
- Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of
malfunction, always seek advice from a specialist.
- Do not force the controls.
- This unit is with speaker inside which can cause magnetic eld. Keep this unit at least 60cm away from computer or TV.
- If the unit has fallen, always have it checked by a qualied technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause interference.
- Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
- Keep the original packing material so that you can transport the unit in safe conditions.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certied CE. It is prohibited to make changes to the unit. They would invalidate the CE certicate and any
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.
Specications can be ch d without prior notice.ange
INSTALLATION
Cabling of a 70/100 Volt system belongs to an electrical installation which may only be carried out by a qualied electricia n!
The total load must not exceed the rated power of the amplier. Before starting the installation, make clear how many speakers ,
you want to install in the room, and with what wattage(s), as overload will damage the amplier and speaker.
Procedure:
Step 1: If the 70/100Volt system is turned on, turn it o before connecting.
Step 2: nnect the speaker(s) to the 70/100V amplier output, using a two-core 100Volt suitable cable. For the Co
wiring diagram, see later in this manual.
Always insulate the unused connection cables.
Step 3: If you are connecting multiple speakers, make sure that all speakers have the same polarity and that the
amplier is not overloaded.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The warran ty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations an w nings. This is also applicable to all damages in whatever form. d ar
Produktspecifikationer
| Varumärke: | Power Dynamics |
| Kategori: | högtalare |
| Modell: | ICS4 |
Behöver du hjälp?
Om du behöver hjälp med Power Dynamics ICS4 ställ en fråga nedan och andra användare kommer att svara dig
högtalare Power Dynamics Manualer
9 Mars 2025
15 Januari 2025
6 Januari 2025
30 December 2025
30 December 2025
22 September 2024
22 September 2024
22 September 2024
22 September 2024
20 September 2024
högtalare Manualer
- AVerMedia
- Blackmore
- Krüger And Matz
- Penton
- DeWalt
- Scansonic
- Jay-tech
- Fusion
- Roswell
- Argon
- Match
- Approx
- Antelope
- PMC
- S-Digital
Nyaste högtalare Manualer
16 Juni 2025
15 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025