Powerplus Solar PowerBank Bruksanvisning

Powerplus powerbank Solar PowerBank

Läs gratis den bruksanvisning för Powerplus Solar PowerBank (2 sidor) i kategorin powerbank. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 5.5 recensioner. Har du en fråga om Powerplus Solar PowerBank eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

BlueWalker Solar PowerBank Quick Guide

Version: 1.0

Thank you for purchasing this product. This is a portable lighting solution. It is specifically

designed to provide lighting and power solutions to remote areas where no electricity exists.

It can be easily adapted for the various environments such as garages, barns, sheds,

gazebos, green house and boat docks.

Product Overlook

1. Main power switch

2. Built-in LED (only available for SL1 model)

3. Built-in LED (only available for SL2 model)

4. Lamp connectors

5. PV input

6. USB output port

7. Control button for right lamp

8. Control button for left lamp

9. Micro USB port

10. Control button for USB output

11. Power on: green lighting

Low battery: green flashing

Fault: Red lighting

12. Battery charging: red lighting

Full battery: green lighting

1. Inspecon

The following items are inside the box:

Power pack

Lamp with holder and cable x 2pc

Solar panel with cable

Remove all items from its package and inspect it for damage that may have occurred during

shipping. If any damage is discovered, re-pack the unit and return it to the place of

purchase.

2. Charging

Before first use, please be sure to charge the battery fully. You can charge battery from

either solar panel or micro USB.

Charged by solar panel: Simply connect solar panel to “ “ marked on power pack and PV IN

place the power pack and lamps in the shaded place, where avoid exposing to sunshine

directly and away from moisture.

Charged by micro USB: Simply use a micro USB power adapter to connect Utility and the

micro USB connector marked with “5V IN”.

3. Connect to the Outputs

There are two kinds of output connectors for different devices. Please follow below

instructions to connect suitable loads to the power pack.

Two Lamps with Holders

Plug in the bundled lamp cable on the top of power pack.

Mobile Charging

There are two USB output ports for mobile device charging. Simply connect mobile devices

to USB output marked 5V OUTwith “ ”.

Inial Startup & Operaon

Product Overview

BlueWalker Solar PowerBank Quick Guide

Version: 1.0

Complete lighting system diagram

4. Operaon

Lamps/Built-in LED Operation

If pressing main power switch to turn on the unit, both connected lamps will to “l” position

be lighting. There are two control buttons on the two sides of power pack, one to control

on/off for right lamp and the other to control on/off for left lamp.

If pressing main power switch -in LED will light up at the to “ll” position, lamps and built

same time.

USB OUT Operation

No matter main power switch is on USB output port will be default off. “l” or “ll” position,

Simply press “USB On/Off” button to turn on USB output power.

Please do not expose the lighting system under the blazing sun for a long time when

the solar panel is charging it.

Before first use or after prolonged storage, please turn off the switches and fully

charge the battery.

This lighting system should be charged at least once a month and each time it should

be fully charged at least 6 hours. Be sure to put solar panel under direct sunlight.

The power pack and the lamps should always be placed in a dry and shady place.

Please keep it away from fire or any corrosives.

Please always keep the surface of solar panel clean and in good condition.

Any actions such as throw, drop, fall, knock are all prohibited.

Important Safety Warning

Produktspecifikationer

Varumärke:	Powerplus
Kategori:	powerbank
Modell:	Solar PowerBank
Bredd:	244 mm
Djup:	244 mm
Ethernet LAN:	Ja
Maximal upplösning:	4096 x 2160 Pixels
Typ av strömkälla:	ATX
Medföljande kablar:	SATA
Antal USB 2.0-portar:	6
VGA (D-Sub) port(ar):	1
Antal HDMI-portar:	1
Antal Ethernet LAN (RJ-45)-portar:	1
HDCP:	Ja
DVI-D-portar:	1
Hållbarhetscertifikat:	RoHS
Stöder Windows:	Ja
Processoruttag:	Socket FM2+
Processorfabrikant:	AMD
Maximalt internminne:	32 GB
Ljudutgångskanaler:	5.1 kanalen
Ethernet-gränssnittstyp:	Gigabit Ethernet
Chipset moderkort:	AMD A58 FCH (Bolton D2)
Typ av minnesplats:	DIMM
Ljudchip:	Realtek ALC662
Medföljande drivrutiner:	Ja
Typ av kylning:	Passief
Minneskanal:	Dubbelkanaals
Gränssnitt för lagringsenheter som stöds:	SATA II
PS/2-port(ar):	2
Komponent för:	PC
LAN-kontroller:	Realtek RTL8111GR
Typer av RAID:	0, 1,10
PCI Express x8 (Gen 3.x)-platser:	1
Icke-ECC:	Ja
Vakna på LAN:	Ja
PCI-platser:	1
Minnestyper som stöds:	DDR3-SDRAM
PCI Express x1 (Gen 2.x)-platser:	1
Moderkort chipset familj:	AMD
Moderkorts formfaktor:	micro ATX
Antal minnesplatser:	2
Minnesklockhastigheter som stöds:	1066,1333,1600,1866,2133,2400 MHz
BIOS-typ:	UEFI AMI
BIOS-minnesstorlek:	64 Mbit
ACPI-version:	1.1
COM-anslutningar:	1
Anslutning för CPU-kylare:	Ja
Anslutningar för husfläktar:	1
ATX-strömkontakt (24-stift):	Ja
Strömförsörjningsfläktanslutning:	Ja
USB 2.0-anslutningar:	2
Anslutning för ljudpanel på framsidan:	Ja
PC hälsomonitor:	CPU, FAN, Temperature, Voltage
Obuffrat minne:	Ja
TPM-kontakt:	Ja
Chassiintrångsanslutning:	Ja
Processorns termisk effekt (max):	100 W
Antal SATA II-kontakter:	6
Diskret grafikstöd:	Ja
Intel® Extreme Memory Profile (XMP):	Ja