Powr-Flite Millennium NM201HD Bruksanvisning
Powr-Flite
golv polerare
Millennium NM201HD
Läs gratis den bruksanvisning för Powr-Flite Millennium NM201HD (6 sidor) i kategorin golv polerare. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 1.5 recensioner. Har du en fråga om Powr-Flite Millennium NM201HD eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/6
OPERATOR’S MANUAL
WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL
COMPLETELY BEFORE OPERATING THIS EQUIPMENT.
©
Tacony Corporation, All rights reserved
Save These Instructions
STANDARD AND DUAL SPEED
FLOOR MACHINES
NM9287 03/2020
Standard Speed Heavy Duty, 175 RPM
NM171HD, NM201HD
Dual Speed, 175/320 RPM
NM202
Sander, 175 RPM
NM171SD
2
GROUNDING INSTRUCTIONS
This appliance must be grounded. If it should malfunc-
tion or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk electric
shock. This machine is equipped with a cord having an
equipment -grounding conductor and grounding plug.
The plug must be inserted into an appropriate outlet that
is properly installed and grounded in accordance with all
local codes and ordinances.
WARNING: Improper connection of the equipment-
grounding conductor can result in a risk of electric
shock. Check with a qualified electrician or service per-
son if you are in doubt as to whether the outlet is prop-
erly grounded. Do not modify the plug provided with the
appliance - if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
This appliance is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illus-
trated in sketch A.
GROUNDING
PIN
GROUNDING
OUTLET
GROUNDED
OUTLET BOX
A
Your new Powr-Flite Floor Machine will afford you many years of trouble-free operating satisfaction provided it is
given proper care. Prior to packaging, your Powr-Flite Floor Machine was inspected by a Quality Control Technician.
This machine is designed to be safe when used to
perform the functions specified in this Operator’s
Manual. Should damage occur to electrical or
mechanical parts, the machine should be repaired by
the manufacturer or competent service station before
using in order to avoid further damage to the machine
or physical injury to user. Your floor machine is
equipped with a safety switch lockout device designed
for your safety. Do not attempt to bypass or defeat the
safety lockout device. Never use any device to lock the
power switch triggers in the ON position.
• Only replace the supply cord with the type specified
in the instructions.
• Regulary examine the supply cord for damage, such
as cracking or ageing - if damage is found, replace the
cord before further use.
• A large diameter brush or dry buffing may not be
used for general polishing.
• The appliamce is designated for use with brushes as
specified by the manufacturer - fitting of other
brushes may impair appliance safety.
READ THIS
OPERATOR’S MANUAL!
WARNING: Personal Protective Equipment (PPE), such
as safety glasses, may be worn if desired.
WARNING: You must have training in the operation of
this machine before using it.
WARNING: Machines can burn flammable materials
and vapors. Do not use this machine with or near
fuels, grain dust, solvents, thinners or other flammable
materials.
WARNING: Do not operate this machine unless it is
completely assembled.
WARNING: Do not use this machine as a step or to
move furniture.
WARNING: When disconnecting power cord from
electrical outlet, grasp the plug. Pulling it out by the
cord itself can damage cord insulation and internal
connection to plug. To prevent electric shock, always
remove the electrical plug from the electrical outlet
before doing any repairs or maintenance to this
machine.
WARNING: To prevent injury, always remove the
electrical plug from the electrical outlet before
changing the polishing pad and before leaving the
machine.
WARNING: To prevent injury, keep hands, feet and
loose clothing away from the rotating pad.
WARNING: Children, even if supervised, are not to play
with or operate this machine.
IMPORTANT SAFEGUARDS
WARNINGS
WARNING: Maintenance and repairs must be done by
authorized personnel only.
WARNING: Keep all fasteners tight. Keep adjustments
according to specifications.
WARNING: Keep the electrical parts of the machine
dry. For storage, keep the machine in a building.
WARNING: Always use a three-wire electrical system
connected to the electrical ground. For maximum
protection against electric shock, use a circuit that is
protected by a ground fault circuit interrupter. Consult
with your electrical contractor.
WARNING: To prevent damage to the power cord, do
not let the pad, pad driver or wheels touch the power
cord when the machine is running. Always lift the
power cord over the machine.
WARNING: Make sure all labels, decals, warning,
cautions and instructions are fastened to the machine.
WARNING: Machine is for indoor use only.
3
APPLICATIONS FOR FLOOR MACHINE MODELS
NM171HD AND NM201HD 175 RPM ONLY
ON HARD FLOORS
• Spray buffing with red spray buff pad and spray buff
chemical.
• Dry buffing a buffable finish with a tan, beige or white
pad or brush.
• Scrubbing with green or blue pad or scrubbing brush.
• Stripping with a black pad and a stripping chemical.
ON CARPET
• Bonnet cleaning with a yarn bonnet and carpet
maintainer chemical.
• Shampooing using a showerfeed shampoo brush and
solution tank mounted to the handle tube containing
carpet shampoo.
The Powr-Flite 175 RPM floor machine will operatea in a
wide variety of applications. The 175 RPM floor machine
is the most versatile speed in the floor care industry.
The heavy duty standard speed floor machine may
be used for spray buffing, dry buffing, scrubbing and
stripping applications. These heavy duty floor machines
are specially recommended for long term aggressive
scrubbing and stripping maintenance.
The NM201HD & NM171HD heavy duty floor machines
are specially recommended for the following
applications:
•Scraping with an attachment tool to remove heavy
industrial deposits and residue or to prepare a
foundation for installation of carpet.
• Wire brushing of concrete floors.
• Carpet restoration where shampooing & pile lifting
require very stiff brush bristles. • Sanding with very
aggressive sandpaper or sand screen discs.
APPLICATION OF THE DUAL SPEED 175/320
RPM MACHINES (MODEL NM202)
The Powr-Flite dual speed machines will operate in a
broad range of applications. These machines perform
all the applications of the 175 RPM standard speed
machines and the 300 RPM high speed machines except
the specialized applications.
Do not use high speed for sanding, grinding or
scraping.
The dual speed machines are specially designed for
spray cleaning of heavy traffic areas.
Figure 1
Figure 2
CAUTION: This is the only proper way to install a drive
block, brush or attachment. put a drive block,NEVER
brush or attachment on the machine by placing it on
the floor and moving the running machine over it, or by
placing the machine over the block or attachment and
then starting the motor. Return the floor machine to
upright position and adjust handle to operating position.
Recommended handle position is close to the waist with
arms extended down. Lock the cam release lever into
position. Be mindful of machine’s weight.
NOTE: The hardened steel cam release lever does not
require extreme tightening to effectively hold the handle
in position. Over-tightening will shorten the functional life
of the lever. To remove drive block, brush or attachment:
Lay the floor machine on it’s back again and disengage
clutch plate slots from driving plate lugs by turning
clockwise.
PREPARE THE MACHINE FOR OPERATION
To attach the drive block or brush or other attachment,
be sure the handle is “locked” in the upright position
(Figure 1). Lay the floor machine on its back with the
handle lying on the floor, this exposes the driving plate
on the underside of the floor machine. Holding the drive
block, brush or attachment in both hands and straddling
the motor with your back to the handlebox, bend over
and fit the three slots of the clutch plate (build into the
back of the brush) over the three lugs of the driving
plate. Turn the drive block, brush or attachment counter-
clockwise far as it will go until it is seated in the ready to
use position. (Figure 2).
Produktspecifikationer
| Varumärke: | Powr-Flite |
| Kategori: | golv polerare |
| Modell: | Millennium NM201HD |
Behöver du hjälp?
Om du behöver hjälp med Powr-Flite Millennium NM201HD ställ en fråga nedan och andra användare kommer att svara dig
golv polerare Powr-Flite Manualer
25 Augusti 2025
25 Augusti 2025
25 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
golv polerare Manualer
Nyaste golv polerare Manualer
25 Augusti 2025
25 Augusti 2025
25 Augusti 2025
25 Augusti 2025
25 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025
24 Augusti 2025