Presto Stainless Steel Options Bruksanvisning

Presto fritös Stainless Steel Options

Läs gratis den bruksanvisning för Presto Stainless Steel Options (11 sidor) i kategorin fritös. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 3 recensioner. Har du en fråga om Presto Stainless Steel Options eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/11



So versatile, you’ll use it every day.



      



I

2009 by National Presto Industries, Inc.

Visit us on the web at www.GoPresto.com

This is a Listed appliance. The following important safeguards are recommended by most portable appliance manufacturers.

IMPORTANT SAFEGUARDS

To reduce the risk of personal injury or property damage, when using electrical appliances basic safety precautions should always be

followed, including the following:

Read all instructions1. .

2. Be sure that handles and legs are assembled and fastened properly before using this appliance (see page 2).

3. Do not touch hot surfaces. Use handles or knobs.

4. To protect against electrical shock or burns, do not immerse heat control or magnetic cord assembly in water or other liquid.

5. Close supervision is necessary when any appliance is used by or near children.

6. Be sure handle is properly attached to basket and locked in place. See detailed assembly instructions on page 2.

7. Do not let children handle or put electrical cords or plugs in their mouths.

8. Always attach heat control and magnetic cord assembly to appliance ﬁrst, then plug cord into the wall outlet. To disconnect heat

control and magnetic cord, turn control to “OFF”, remove plug from wall outlet and cord assembly from heat control. Allow appliance

to cool, then remove heat control from unit.

9. Unplug from outlet and remove heat control from appliance when not in use and before cleaning. Allow appliance to cool before

putting on or taking off parts, and before cleaning.

10. Do not operate any appliance with a damaged cord or plug or in the event the appliance malfunctions or has been damaged in any

manner. Return the appliance to the Presto Factory Service Department for examination, repair, or adjustment.

11. The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.

12. Do not use outdoors.

13. Do not let cord hang over edge of table or counter or touch hot surfaces.

14. Do not place on or near a hot gas or electric burner or in a heated oven.

15. It is recommended that this appliance not be moved when it contains hot oil or other hot liquid. If it must be moved when it contains

hot oil or other hot liquid, use extreme caution.

16. Do not use appliance for other than intended use.

SAVE THESE INSTRUCTIONS

THIS PRODUCT IS FOR HOUSEHOLD USE ONLY.

Options



multi cooker/steamer-

IMPORTANT CORD AND PLUG INFORMATION

A short power supply cord (or cord set) is provided to reduce the risk resulting from becoming entangled in or tripping over a longer

cord. DO NOT USE WITH AN EXTENSION CORD.

Do not allow the cord to run underneath or around the unit. The magnetic cord may not detach easily if the cord is positioned in this

fashion.

Connect the power supply cord to a polarized outlet only. As a safety feature, this appliance has a polarized plug (one blade is wider than

the other). This plug will only ﬁt in a polarized outlet one way. If the plug does not ﬁt fully in the outlet, reverse the plug. If it still does

not ﬁt, contact a qualiﬁed electrician. Do not attempt to defeat this safety feature.

How to Install Legs and Handles

Tools Required: Phillips type screwdriver

Parts Included: 4 Legs

2 Handles

To Install Legs

1. Place multi-cooker upside down on table or counter.

2. Using the screwdriver, remove the screws from each of the four mounting projections on the bottom of the unit. These screws are for

attaching the legs to the multi-cooker base.

3. Position one of the legs, with the rubber insert facing up, over one of the mounting

projections (Fig. A). Align the hole in the leg with the hole in the mounting

projection and fasten securely with screw. Leg should not rock or move if twisted.

Caution: Overtightening can result in stripping of screws or cracking of

legs.

4. Repeat step 3 for other three legs.

5. Turn multi-cooker right side up on table or counter. When properly assembled,

the multi-cooker should sit level with no leg rock.

To Attach Handles to Base

1. With multi-cooker upside down on table or counter, remove the screws from

the tabs on each side of the multi-cooker base. These screws are for attaching

the handles to the base.

Hint: When removing the screw under the heat control receptacle, hold the

screwdriver at a slight angle or use a short screwdriver or a screwdriver with

a long shank.

2. Slide one of the handles, with the screw hole facing up, onto the tab so the screw hole on the tab

aligns with the screw hole on the handle (Fig. A). Fasten with screw and tighten fully. Handle

should not wobble or move when grasped. Overtightening can result in stripping of Caution:

screws or cracking of handles.

3. Repeat step 2 for other handle.

4. When properly installed, the handles should appear level with the table or counter.

To Attach Basket Handle

1. Slide lock bar up on handle (Fig. B) and place one of the handle bars into one of the tabs on

bracket. Then squeeze the handle bars together, and ﬁt the other handle bar into the opposite

tab on bracket.

2. After attaching handle to basket, slide the lock bar down (Fig. C) to insure against accidental

detachment of handle from basket.

Lock bar

Fig. C

Fig. B

Tab

Handle bar

Leg

Mounting

projection

Screw

Rubber

insert

Handle

Tab

Screw

Tab

Screw

hole

Fig. A

Heat

control

receptacle

Before First Use

Become familiar with the various parts of the

multi-cooker (Fig. D) and read the instructions

carefully.

This versatile electric multi-cooker braises,

blanches, boils, deep fries, stews, steams, makes

soups and desserts.

Caution: This product is not intended to melt

wax, gels, plastics, or other materials for mak-

ing candles or for other hobbyist activities or

in any commercial or business application.

How To Use

Before initial use, and after each subsequent use, wash appliance in dishwasher* or in warm sudsy water, rinse, and dry. Do not immerse

heat control or magnetic cord assembly in water or let them come in contact with any liquid. Prior to ﬁrst use, “season” the multi-

cooker’s cooking surface by rubbing lightly with cooking oil. Remove excess oil with paper towel.

For best results use nylon, plastic, wooden, or rubber utensils to turn, stir, or remove food when not using the steam/fry basket. The use

of metal utensils is not recommended.

1. Place multi-cooker on a dry, level, heat resistant surface. The cover should not be on the multi-cooker.

CAUTION: To avoid personal injury, position multi-cooker well back from edge of counter or table. Do not let cord hang or drape

over edge of counter or table within reach of children.

2. Insert the probe end of the heat control into the multi-cooker so the two

electrical pins on the appliance are fully inserted into the heat control. Then

attach the magnetic cord assembly to the heat control by aligning the magnetic

coupler end with the two electrical pins located on the back of the heat control

(Fig. E). Due to the fact that the magnetic coupler end is polarized, it can only

be attached to the heat control one way. When properly aligned, the plug will

magnetically attach itself to the heat control. Attach the cord so that the printed

patent information on the magnetic plug is facing up. The daisy and cautionary

language will be facing towards the counter. If positioned upside down, it will

not attach.

Important: The magnetic cord was designed to detach easily from the

multi-cooker. As a result, if it is bumped or touched during use it could

possibly detach causing the unit to stop heating. Avoid contact with cord

during operation. If contact occurs, verify that the cord is still properly

connected.

3. Plug the multi-cooker into a 120v AC electrical polarized outlet only.

4. Using the index on page 4, determine the type of cooking method you will be

following and turn to the referenced page.

5. Preheat multi-cooker as indicated in the cooking method and follow the cook-

ing instructions. During cooking, the pilot light will go on and off indicating

temperature is being maintained. Note: Occasionally you may hear a pop or

clicking sound while the multi-cooker is preheating. This is normal and a sign of fast heatup. You may also notice this sound as the

unit cools down.

When using the multi-cooker for the ﬁrst time, a slight odor or light smoking may occur as manufacturing residue evaporates. This

is normal during initial use.

*When washing in the dishwasher the aluminum bottom of the multi-cooker will discolor.

Draining hook

Basket snaps onto multi-cooker rim

for draining and steaming.

Steaming hook

Control Master



heat control

To assure the continued accuracy of the Control

Master



heat control, avoid rough handling

during use and storage. Store the cord assembly

in a clean, dry location away from metal objects.

Always check the magnetic coupler end before use

to assure metal items have not become attached.

Probe

Pilot light

Heat selector

Magnetic cord

assembly

Heat

control

Magnetic

coupler end

Electrical

pins

Fig. E

Control Master



heat control

Basket/handle

Steam/fry

basket

Tempered

glass cover

Nonstick

surface inside

and out

Magnetic cord

assembly

Cover Knob

Fig. D

Produktspecifikationer

Varumärke:	Presto
Kategori:	fritös
Modell:	Stainless Steel Options
Justerbar termostat:	Ja
Kapacitet:	5.7 l
Produktens färg:	Rostfritt stål
Effekt:	1500 W
AC-inspänning:	120 V
Konstruktion:	Single
Flyttbar skål:	Ja
Kallt handtag:	Ja
Teflonbehandlad:	Ja
Oljeinnehåll:	- l