Pro-Ject CD Box DS2 Bruksanvisning

Pro-Ject CD-spelare/brännare CD Box DS2

Läs nedan 📖 manual på svenska för Pro-Ject CD Box DS2 (5 sidor) i kategorin CD-spelare/brännare. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/5

INSTRUCTIONS FOR USE

Pro-Ject CD Box DS2

Dear music lover,

thank you for purchasing a P -Ject Audio Systems CD player. ro

In order to achieve maximum performance and reliability you should study these instructions for use

carefully.

Warning of a hazard for the user, the unit or possible misuse.

Important notice.

This product contains a laser diode To ensure continued safety, do not remove any covers or .

attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.

If a disc is cracked, chipped, warped, or otherwise damaged, don't risk to play it. You could end up

damaging the unit. This player is designed for use with fully circular, full size CDs only. Use of

shaped discs is not recommended. The manufacturer and the distributor disclaims all liability arising

in connection with the use of damaged or shaped discs.

AC outlet voltages vary from country to country. Before connecting to the mains, make sure that

the voltage in your area meets the voltage requirements printed on the power supply.

The power supply is used to disconnect the unit from the mains. Make sure that the power supply

is easily accessible at all times. Never handle the device, the power supply while your hands are

wet or damp.

Avoid letting liquids enter the device or the power supply. Never place any item containing liquid,

such as a ﬂower vase on or near the device. Never spill any liquid on the device or the power

supply. Never place any naked ﬂame sources, such as lighted candles on or near the device. The

product shall not be used in damp or wet locations, next to a bathtub, sink, swimming pool or any

other similar conditions.

Make all connections whilst the CD player is disconnected from the power supply.

Never use any other power supply than the one supplied with the unit.

Connect the low voltage plug from the power supply to the socket of the unit Power 9V before

connecting the power supply to the mains. The unit can be switched on and oﬀ by using 2 diﬀerent

methods which are equal in priorities.

The pushbutton on the front panel of the unit alternately turns the power on or returns it to standby

mode. The blue LED on the front panel shows that the unit is powered on. If a trigger signal is present

the unit c an’t be switched off by the pushbutton.

The unit can be switched on via other Box Design components when a 12V trigger voltage is present at

the 2.5mm socket marked Special power- cables (polarity ) in diverse lengths Trigger Input. on

are available as accessories. The remote power-on signal can be relayed to further units via the Trigger

Output socket. When the 12V trigger signal is switched oﬀ, the unit will also switch oﬀ.

Trigger cables may only be plugged into the sockets when the unit is disconnected from the

power supply and from the mains. Failure to do so may result in damage of the unit.

Select to control the output level of the line level output using the remote control sets the level Var . Fix

to the maximum. A change is only possible when the unit is turned oﬀ – the switch has no function when

the unit is turned on.

Power turns the unit on/oﬀ

CD, Opto1 Opto2 Coax USB, , , selects the

input (alternatively left and right arrows select

inputs in turns)

Mute enable/disable mute function

EJECT ejects the disc

FILTER - selects ﬁlter - see chapter ﬁlter for

further info

Shuﬄe - activates random track play

Repeat - press the button repeatedly for

selecting repeat modes: repeat current track /

repeat for all tracks

Play/Pause/Stop/Next/Previous acts in the

same way as front panel buttons

If the switch on the backpanel is set to Var

then using the two blank buttons above and

below the button allows to control the “CD”

level of the line output.

Produktspecifikationer

Varumärke:	Pro-Ject
Kategori:	CD-spelare/brännare
Modell:	CD Box DS2

Behöver du hjälp?

Om du behöver hjälp med Pro-Ject CD Box DS2 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

CD-spelare/brännare Pro-Ject Manualer

Pro-Ject CD Box S Bruksanvisning

20 Augusti 2024

Pro-Ject CD Box DS2 T Bruksanvisning

18 Augusti 2024

Pro-Ject CD Box DS2 Bruksanvisning

12 Augusti 2024

Pro-Ject CD Box SE Bruksanvisning

11 Augusti 2024

Pro-Ject CD Box S2 Bruksanvisning

10 Augusti 2024

Pro-Ject CD Box DS2T Bruksanvisning

9 Augusti 2024

CD-spelare/brännare Manualer

Nyaste CD-spelare/brännare Manualer

Phonocar VM550 Bruksanvisning

5 April 2025

Proscan PRCD1025 Bruksanvisning

10 Mars 2025

Proscan PCD300-BLACK Bruksanvisning

5 Mars 2025

Atoll CD100 Bruksanvisning

20 Februari 2025

Atoll CD200 Bruksanvisning

20 Februari 2025

AVM CD 30.3 Bruksanvisning

20 Februari 2025

AVM Evolution CD 3.2 MKII Bruksanvisning

20 Februari 2025

Atoll CD50 Bruksanvisning

20 Februari 2025

Atoll DR100 Bruksanvisning

20 Februari 2025

Gold Note CD-1000 MK II Bruksanvisning

20 Februari 2025