Pro-Ject Debut EVO 2 Bruksanvisning

Läs gratis den bruksanvisning för Pro-Ject Debut EVO 2 (12 sidor) i kategorin Skivspelare. Guiden har ansetts hjälpsam av 34 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 5 recensioner. Har du en fråga om Pro-Ject Debut EVO 2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Make sure to have enough space to unpack your turntable.

Always unpack and setup in a clean enviroment.

Please Do NOT throw away the packaging! If you need a

service or want to return your product, please send them

in the original packaging including all inserts. In case of

any damage in another packaging your dealer cannot

• complete manual:

www.project-audio.com/en/product/debut-evo-2

Debut EVO 2

Setup Guide

Getting started:

•

•

•

guarantee a full refund.

1

Remove dust cover from the box.

2

Take the small boxes from the carton.

3

Unpack all items that are packed in the accessorie boxes.

a)

b) c) d)

f)

g)

e)

b)

g)

g)

e)

e)

e)

a)Counterweight

b)Anti Skating Weight

c)Drive belt

d) Adapter for 7“ singles & allen key

e) Connect it E RCA cable

f)Power supply

g)Cartridge alignment tool

Lift the wrapped turntable out of the box.

5

Carefully remove the protection covering.

6

Remove the bottom carton inlay.

4

7

Tonearm is fragile!

8

Put the drive belt on the pulley

9

10

Use the rocker switch to select the

Put the platter on the turntable.

and sub-platter.

playback speed.

Unpack the platter.

12

Remove tonearm twist tie.

13

Put the counterweight in place.

14

Remove the needle protection cover.

16

17

Balance the tonearm so it stays level by

18

Turn the front dial of the counterweight

Place the tonearm between platter

turning the counterweight forwards and (not the whole weight) so the ‘0’ is in line

and armrest.

backwards on the rod. with marker at the back of the tonearm.

Lower the tonearm with the lift.

0°

Balance the tonearm so it stays level by

turning the counterweight forwards and

backwards on the rod.

Balance the tonearm so it stays level by

turning the counterweight forwards and

backwards on the rod.

11

If necessary, level the turntable

by adjusting the feet.

0°

LEFT: 33 RPM

RIGHT: 45 RPM

STOPS THE MOTOR

15

Put a record on the turntable.

19

Turn the whole counterweight counter-

clockwise until the scale reads 18.

20

Put the loop of the Anti Skating Weight in

21

22

Connect to your hi-system &

Plug in the RCA and the power cable. Unpack Dust Cover and put it on the turntable.

the second groove on the tonearm post.

enjoy your music!

>

RCA cable

Power cable

Dustcover

Produktspecifikationer