Pro-Ject Tube Box S3 B Bruksanvisning
Pro-Ject
hi-fi system
Tube Box S3 B
Läs gratis den bruksanvisning för Pro-Ject Tube Box S3 B (4 sidor) i kategorin hi-fi system. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 2.5 recensioner. Har du en fråga om Pro-Ject Tube Box S3 B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
INSTRUCTIONS FOR USE
Tube Box S3 B
© Pro-Ject Audio Systems · Tube Box S3 B · Revision 2025.03.20
2
Dear music lover,
thank you for purchasing a Pro-Ject Audio Systems phono amplifier.
In order to achieve maximum performance and reliability you should study these instructions for use carefully.
Warning of a hazard for the user, the unit or possible misuse.
Important notice.
Safety instructions
AC outlet voltages vary from country to country. Before connecting to the mains, make sure that the
voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to disconnect the unit from the mains. Make sure that the power supply is easily
accessible at all times.
Never handle the device, the power supply while your hands are wet or damp.
Avoid letting liquids enter the device or the power supply. Never place any item containing liquid, such
as a flower vase on or near the device. Never spill any liquid on the device or the power supply. Never
place any naked flame sources, such as lighted candles on or near the device. The product shall not be used
in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar conditions.
Connectors
Make all connections whilst the phono amplifier is disconnected from the power supply.
Take care to connect the left and right channels correctly. The right channel is usually marked red, the
left channel black or white.
Do not connect the phono amplifiers output to a phono input (sometimes labelled
gram
,
disc
or
RIAA
)
on the amplifier.
Never use any other power supply than the one supplied with the unit.
Connecting the record player
Connect the tonearm signal lead to the In (5-pin mini XLR or RCA) of the phono amplifier. If you connected the
lead to the RCA input, please also connect the grounding wire to the screw terminal of the Tube Box.
Connection to the amplifier
Connect the Output (Balanced XLR or RCA) of the phono amplifier to a line input (such as AUX, CD, Tuner,
Tape or Video) on your amplifier.
RCA and XLR outputs are separated and both play all the time. 2 amplifiers can be connected.
Produktspecifikationer
| Varumärke: | Pro-Ject |
| Kategori: | hi-fi system |
| Modell: | Tube Box S3 B |
Behöver du hjälp?
Om du behöver hjälp med Pro-Ject Tube Box S3 B ställ en fråga nedan och andra användare kommer att svara dig
hi-fi system Pro-Ject Manualer
7 Oktober 2025
6 Oktober 2025
11 Augusti 2025
10 Augusti 2025
10 Augusti 2025
10 Augusti 2025
10 Augusti 2025
3 Augusti 2025
3 Augusti 2025
28 Februari 2025
hi-fi system Manualer
- Walrus Audio
- Vivax
- Planet Audio
- Swissvoice
- Sonance
- Solid State Logic
- PAC
- Audio-Technica
- Trevi
- Sonoro
- Scott
- Karcher Audio
- Sven
- Xantech
- Cardo
Nyaste hi-fi system Manualer
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
8 Oktober 2025
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025
7 Oktober 2025