Proaim DL-BRZA-01 Bruksanvisning
Proaim
Inte kategoriserad
DL-BRZA-01
Läs gratis den bruksanvisning för Proaim DL-BRZA-01 (7 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 8 recensioner. Har du en fråga om Proaim DL-BRZA-01 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/7
What s In The Box’
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Breeza Video/Film Camera Dolly Slider
with Track Ends (DL- -BRZA 01)
A s s e m bl y M a n u a l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
Proaim Breeza Dolly
3 x Bolts
Sizes: (6 x 12 mm)
2 x End Spacers
An Tilt Safety -
Brake
Flat Mount Plate
Bag Packing
75mm Bowl
Adapter
3 x Type Allen Keys
Sizes: 2.5, 4mm & 5mm
2 x Wrench Sizes: 17 & 13mm
1 x Low Prole Middle -
Support Spacer
Heavy Duty Sled
4 x Double Wheels
100mm Bowl Adapter
2
End Spacers Assembly
Insert a 4 track into the clamp. Once the
track is properly ed into the clamp, ghtly
secure it with the knob, as shown in the
image.
The height of the end feet of the end spacers
can be adjusted according to your setup
requirement with the help of a knob.
The end feet can be used in both, Hi Hat and-
Low Hat mode accordingly.-
The same process is to be followed for the
other track.
NOTE: It comes with track ends for overall -
secure and smooth track running.
To insert a track in the end spacers, rst
loosen the knobs of the clamp and then slide
up the clamp to easily t the track.
Now place the breeza dolly onto the 4 track.
The handles part of the dolly plaorm should
be inside of the track as shown. Make sure all
wheels are aligned correctly on the track and
dolly runs smoothly.
NOTE: Proaim Breeza Compact Portable Slider
Dolly integrates the latest technology with
supreme quality to maximize your creave
potenal.
Breeza Dolly Setup
3
Properly secure with a knob aer mounng
the safety brake. Follow the same process on
the other side.
Now mount a 75mm bowl adapter, insert the
screws and properly secure the adapter with
the help of an Allen key.
The 75mm bowl adapter is mounted on the
dolly plaorm, as shown in the image.
NOTE: It has a 16 wheel design with oang -
trucks that gives smooth, squeak free move on a -
straight or curved track.
The dolly plaorm already has a 100mm bowl
adapter mount. To mount a 75mm bowl, rst
loosen the screws using an Allen key and
remove the 100mm bowl.
NOTE: The Breeza dolly plaorm is designed
with a Bowl mount 75mm, 100mm, and an at
base mount.
Mount the Safety Brake on side of the Breeza
dolly plaorm. Adjust the posion of the
bracket so it goes under the track to prevent
the plaorm from lng out.
Loosen the knob to properly open the safety
brake.
An Tilt Safety Brake Assembly-
Produktspecifikationer
| Varumärke: | Proaim |
| Kategori: | Inte kategoriserad |
| Modell: | DL-BRZA-01 |
Behöver du hjälp?
Om du behöver hjälp med Proaim DL-BRZA-01 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Proaim Manualer
2 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
31 Januari 2025
29 Januari 2025
28 December 2024
28 December 2024
28 December 2024
Inte kategoriserad Manualer
- Toomax
- Vipack
- Lynx
- Electrolux
- Drive Medical
- Beaphar
- Pontec
- Bestron
- Maglite
- Nanlite
- Planet
- STANDARD
- LevelOne
- Spanninga
- Panasonic
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025