Projecta HDBT250 Bruksanvisning

Projecta Inte kategoriserad HDBT250

Läs gratis den bruksanvisning för Projecta HDBT250 (8 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 2.5 recensioner. Har du en fråga om Projecta HDBT250 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/8

P/No. HDBT250

Tray Fitting Instructions to suit Auxiliary battery for

Mazda BT50 B3000 Manual/Ford Ranger PJ–PK Manual

Years: Jan 2007 – Oct 2011

Models: WLT – 2.5 Litre Turbo Diesel & 3.0 Litre Diesel

HEAVY DUTY DUAL BATTERY TRAY

IMPORTANT SAFETY INFORMATION

Please read this instruction thoroughly before fitting the tray.

This product is recommend to be fitted by a workshop or qualified mechanical person.

WARNINGS

• Before installation, make sure that the vehicle is stationary and the wheels chocked.

• Be careful when laying wires, not to cause any electrical shorts or wire breakage.

• After installation ensure the bonnet can close without hitting the newly installed battery

and battery tray.

SPECIFICATIONS

Max Battery Size (mm) L265 x W174 x H220

Max Battery Weight 18Kg

Recommended batteries Exide LCS 24-86 & Century NS70T

Approximate fitting time 1 hour

Special tools None required

Recommended Dual IDC25, DBC100, DBC150, VSR100 or VSR200

Battery System

Tray Location Engine Bay, Passenger Side near radiator support

KIT INCLUDES

Hardware

1 x M8 Bolt Long

3 x M6 Bolt Hex

1 x M6 Nut

Universal

Top Mount

Tray

J Bolts

1. Make sure that the vehicle is stationary, the engine is switched off and cool.

Disconnect the negative battery terminals from the main battery.

2. Your Auxiliary tray will be located between the passenger side headlight and air

cleaner. Remove the rear M8 bolt with large flange located on inner guard where

you will locate tray, in between the headlight and air cleaner and retain.

3. Move wiring loom from the same position.

4. Place tray in position. Air conditioning pipe may need to be manipulated.

5. Place M8 bolt into captive nut below air-conditioning pipe.

6. Replace M8 bolt from step 2 through bottom bracket into guard.

7. Place two M6 Hex bolts in upper bracket into the exiting captive nuts.

FITTING INSTRUCTIONS

Produktspecifikationer

Varumärke:	Projecta
Kategori:	Inte kategoriserad
Modell:	HDBT250
Färg på produkten:	Wit
Antal Ethernet LAN (RJ-45)-portar:	2
Certifiering:	RoHS
Ethernet LAN, dataöverföringshastigheter:	10, 100 Mbit/s
Nätverksstandard:	IEEE 802.3af
Förvaringstemperatur:	-40 - 85 °C
Strömspänningsskydd:	Overspanning
Förvaringsfuktighet:	5 - 95 procent
Ethernet-gränssnittstyp:	Fast Ethernet
Upphängningssystem för väggen:	Ja
Power over Ethernet (PoE):	Ja
Mått (B x D x H):	130 x 78 x 50 mm
Drifttemperatur (TT):	-20 - 60 °C
Relativ luftfuktighet i drift (VV):	5 - 95 procent
Antal-produkter-ingår:	1 stuk(s)
Harmoniserad systemkod (HS):	85044090
Kabeltyper som stöds:	Cat5
Spänningsskydd:	Ja
Ström via Ethernet (PoE):	- V