Proteus ISS-500 Bruksanvisning


Läs gratis den bruksanvisning för Proteus ISS-500 (12 sidor) i kategorin Motionscykel. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 8.5 recensioner. Har du en fråga om Proteus ISS-500 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/12
Computer Manual - Proteus ISS-500
KEY GUIDE:
MODE 1. Select function and display on the screen during exercise.
Scan – Time – Calorie – RPM – Count.
2. Press this button to confirm the setting values of time, calorie and count.
3. Hold two seconds to reset all of values to zero.
UP Increase the setting value of the following functions.
Time – Calorie – Pulse – Count.
DOWN Decrease the setting value of the following functions.
Time – Calorie – Pulse Count.
ENTER 1. Press this button to enter setting mode.
2. Select function to be preset.
Time – Calorie – Pulse – Count.
3. Press this button to confirm the setting values of pulse.
BATTERY REPLACEMENT:
1. Please install 2 pcs AA or UM-3 batteries in the battery case on the back of monitor.
2. Ensure that the batteries are correctly fitted. Battery must be correctly positioned and make sure the battery
spring is properly contacted with battery.
3. Should the displays appear blank or display only partial segments remove the batteries, wait 15 seconds, and
then replace again.
4. Whenever remove batteries, all the functional values will be to zero.


Produktspecifikationer

Varumärke: Proteus
Kategori: Motionscykel
Modell: ISS-500

Behöver du hjälp?

Om du behöver hjälp med Proteus ISS-500 ställ en fråga nedan och andra användare kommer att svara dig