Pure Acoustics BQ 360 Bruksanvisning

Läs gratis den bruksanvisning för Pure Acoustics BQ 360 (1 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 4.5 recensioner. Har du en fråga om Pure Acoustics BQ 360 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/1
Take the cardboard template that comes with the speakers and
place it where you want the speaker to be mounted.
Draw around the template and cutout the speaker mounting hole.
Run quality speaker wire (12-16 gauge ) to that location.
Carefully pry off the grill from the speaker either using a small
screwdriver at the edge of the grill or with a small awl catching the
grill by one of its holes.
Connect the speaker wire to the speaker terminals and insert the
speaker into the hole.
There are screws around the perimeter of the face of the speaker
(6 on the inwalls). These screws connect to ‘wings in the rear of the
speaker which will swing out and clamp the speaker to the wall as they
are tightened.Secure the speaker to the wall by tightening these screws
until the speaker is securely mounted.
Reattach grill.
That s It ! Enjoy !
In-wall Speakers
Cutout Dimension
BQ260: 183x183mm
BQ108: 247x247mm
BQ260/108

Produktspecifikationer

Varumärke: Pure Acoustics
Kategori: högtalare
Modell: BQ 360

Behöver du hjälp?

Om du behöver hjälp med Pure Acoustics BQ 360 ställ en fråga nedan och andra användare kommer att svara dig