Pure Acoustics QBT 230 Bruksanvisning
Pure Acoustics
högtalare
QBT 230
Läs gratis den bruksanvisning för Pure Acoustics QBT 230 (3 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 8.5 recensioner. Har du en fråga om Pure Acoustics QBT 230 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/3
QBT-230
Bluetooth Audio Speaker
Dear Sir/Madame,
Congratulaons on your purchase of the Pure Acouscs QBT-230 .
Please read this user manual carefully in order to operate this device correctly and enjoy its excellent
performance.
I. Noce
Please store and use this product at normal temperature;
DO NOT expose this product to liquid or other damp condions;
DO NOT drop this product and keep out of reach of small children;
DO NOT disassemble, repair and modify this product yourself, doing so may void the warranty;
Please dispose of speaker properly. Built in baery may explode if not disposed of properly.
II. Reminder
1. To extend the speaker‘s service life, please refrain from listening to music under max volume for
extended periods of me to prevent damage to your hearing.
2. If at any me you have an issue with the speaker, immediately shut o the speaker, disconnect the
power plug (USB), to prevent damaging the speaker and other components.
3. Power shortages will aect the allotted Bluetooth distance and/or the Bluetooth rapid pair feature so
please make a note to recharge the QBT-230 aer long uses.
三
三
三
三三 Overview
V - Decrease the volume />：
V + Increase the volume /<：
Answer/ End Buon ：
Function Keys
Speaker
Power on/ o
3.5mm Aux in
USB 5V
IV.Parameters
Model: QBT- 230
Bluetooth specicaon: Bluetooth V2.1+EDR
Transmission distance: (It varies when the environmental factors and the connected Bluetooth ≦10M
devices are different)
USB charging voltage: DC 5V
Built-in baery: Lithium battery
Output power: 3W *2
Frequency response: 90Hz-20KHz
Sensivity: 80db±2db
S/N rao: ≥ 76dB
Dimensions: 58*73*120 MM
Unit net weight: 250.00g
V. Packing List
1. QBT-230 Bluetooth Audio Speaker 1 piece
2. 3.5mm audi jack cable 1piece o
3. Micro USB power cable 1piece
3 User Manual 1 piece .
VII. Common Funcons
Start: Turn on the QBT-230, when double beep is heard blue l begins to blink, the default power is 60%ed ,
and the speaker is now in pairing mode.
Bluetooth connecon: At this me, turn on the Bluetooth device you wish to connect and choose
QBT-230 from the list of discovered devices Q 230 will automacally exit pairing mode if no Bluetooth . BT
devices are found within 5 minutes.
Tip: If the connecon fails, please turn off the QBT- and restart it. Also, check that there is sufcient 230
power.
Bluetooth mode: Connect QBT- with the desired Bluetooth device and230 hold V + / V - to increase or decrease the
volume.
Hands-free: Connect QBT-230 with Bluetooth device. When an incoming call comes in, QBT-230 will beep. Press
to answer the call and re-press to hang up the call.
AUX source: Insert one end of provided audio cable into the AUX port on the back of Q 230 and the BT
other end into the desired audio port device. The player begins to play. The QBT-230 will start to play the
track You may increase or decrease the volume freely on the player. .
Tip: <V + >V - / are not operational in AUX mode, volume and music are controlled directly on the music player./
Smart automac quick charge: Charge in power-o state. Insert the aached USB power cable with the
micro USB end into the USB power port of QBT-230 and the other end into the USB port of PC or the USB
charger to start charging. When the charging is over, the red indicator will be o.
VIII. Compability
Device equipped with BLUETOOTH v2.1 or higher compable with (for details please refer to the relevant
agreements, general specicaon), iPad, iPhone (2nd generaon and iPhone with updated 3.1 soware
or later), iPod Touch MAC with Bluetooth funcon, and majority of smart phones or computers whi , ch
support a bluetooth feature.
Bluetooth v2.1+ EDR & A2DP, AVRCP, HFP
IVV. Troubleshooting
Problem
Troubleshoong
Failure in connecon and
pairing
1. Inspect whether the Speaker is in pairing mode, or, restart the
speaker.
2. Many Bluetooth devices in the vicinity; this may create are
diculty in idenfying the QBT- Minimize the amount of 230.
bluetooth devices in your vicinity and retry.
The sound is small or
distorted
1. Adjust the volume of the Bluetooth speaker.
2. The power of baery is insucient, please recharge QBT- . 230
Disconnuous music
See whether you have exceeded the distance alloed (30/10m)
or, whether there is an obstrucon between the QBT- and the 230
Bluetooth device you are connected to.
The indicato for r
Bluetooth mode is not on
1. It indicates that the power of the baery is not sucient.
Please recharge the QBT- . 230
2. Restart the speaker.
Phenomenon
Produktspecifikationer
| Varumärke: | Pure Acoustics |
| Kategori: | högtalare |
| Modell: | QBT 230 |
Behöver du hjälp?
Om du behöver hjälp med Pure Acoustics QBT 230 ställ en fråga nedan och andra användare kommer att svara dig
högtalare Pure Acoustics Manualer
19 Oktober 2024
19 Oktober 2024
18 Oktober 2024
18 Oktober 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
högtalare Manualer
- Avantree
- AQL
- Antelope
- Andover
- Dreamgear
- Victrola
- Cygnett
- Schardt
- Linn
- Audica
- Rebeltec
- Irradio
- Lenovo
- Nubert
- IRC
Nyaste högtalare Manualer
16 Juni 2025
15 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025