Pyle PDMR5 Bruksanvisning

Pyle Subwoofer PDMR5

Läs gratis den bruksanvisning för Pyle PDMR5 (2 sidor) i kategorin Subwoofer. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 7 recensioner. Har du en fråga om Pyle PDMR5 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
www.PyleUSA.com
Specications:
Power Handling:
RMS Power: 100 Watts
Peak Power: 200 Watts
Cone Material: 5'' Paper Coating Cone
Voice Coil: 1'' High-Temperature Aluminum Voice Coil
Sensitivity: 92 dB
Frequency Response: 450 Hz – 7 kHz
Impedance: 8 Ohms
Mounting Depth: 2'' (inches)
Minimum Cutout Diameter: 4.33'' (110 mm)
Overall Diameter: 5.15'' (inches)
Installation Instructions
Preparing the Mounting Area: Ensure that the mounting surface is at and free from
debris. Conrm the cutout diameter is 4.33'' (110 mm) to t the woofer properly.
Mounting the Woofer: Align the woofer with the pre-cut hole.
Use screws to securely fasten the woofer into place.
Make sure the screws are tightened evenly to avoid stress on the frame.
Wiring: Connect the positive (+) and negative (-) terminals of the woofer to the
amplier, making sure that the impedance matches the system requirements (8 Ohms).
USER GUIDE
5'' Mid-Bass Mid-Range Woofer Driver
PDMR5
Visit Our Website
SCAN ME
PyleUSA.com
Register Product
Thank you for choosing PyleUSA. By registering your product, you
ensure that you receive the full benets of our exclusive warranty and
personalized customer support. Complete the form to access expert
support and to keep your PyleUSA purchase in perfect condition.
Start Here
Model Number:
PDMR5
PyleUSA.com/pages/register


Produktspecifikationer

Varumärke: Pyle
Kategori: Subwoofer
Modell: PDMR5

Behöver du hjälp?

Om du behöver hjälp med Pyle PDMR5 ställ en fråga nedan och andra användare kommer att svara dig