Pyle PDWR40B Bruksanvisning

Pyle högtalare PDWR40B

Läs gratis den bruksanvisning för Pyle PDWR40B (2 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 24 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 12.5 recensioner. Har du en fråga om Pyle PDWR40B eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
www.PyleUSA.com
Featu
Installation
MOUNTING THE BRACKET MOUNTING
1. Remove the bracket knobs and the bracket
from the speaker.
2. Hold the bracket up to the mounting surface.
" " can be mounted either horizontallyPYLE
wire ts through the large, circular wire hole in
the bracket. Align the bracket to be square with
the surrounding. (Use a level for accuracy)
3. Mark the locations of the three shaped screw holes.
Use all of the holes.
4. Drill pilot holes into the mounting surface.
5. Gently pull the speaker wire through the wire hole
in the center of the mounting bracket.
Align the bracket so that the holes all line up.
6. Use your hardware to attach the bracket to the mounting surface.
Visit Our Website
SCAN
PyleUS
USER GUIDE
INDOOR/OUTDOOR
WEATHERPROOF SPEAKER SYSTEMS
Excellent for use on Boats Marinas, Decks,
Patios, Poolside, Outdoors, Etc.
Completely Water Proof
Each PDWR40B Features:
5 1/4” Aluminum Injection Cone Woofer
40 OZ. Magnet Structure
1”High Compliance Myiar Tweeter
Capacitor Crossover Network
Bass Reex Vent for added Bass Response
Heavy Duty ABS Constrution
Quick Connect/Disconnect Speaker
Terminals
Unique Spring Loaded Mounting System
Removable Rustproof Mesh Grills
Power: 200 Watts RMS/400 Watts Peak
Frequency Response: 40-22K HZ
Impedance: 4 Ohms
Dimensions: 6.25”(W) x 9.25”(H) x 5.75”(D)


Produktspecifikationer

Varumärke: Pyle
Kategori: högtalare
Modell: PDWR40B

Behöver du hjälp?

Om du behöver hjälp med Pyle PDWR40B ställ en fråga nedan och andra användare kommer att svara dig