Pyle PLMR87WB Bruksanvisning
Läs gratis den bruksanvisning för Pyle PLMR87WB (12 sidor) i kategorin Subwoofer. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 10.5 recensioner. Har du en fråga om Pyle PLMR87WB eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/12
1
PLMR87WB
OWNER S MANUAL ’
Mobile Audio System
PLL Synthesizer Stereo Radio
Automatic Memory Storing
USB Interface
SD Interface
3.5mm input jack
Weather Band function
www.PyleU .comSA
2
CONTENTS
Installation ........................................... 3
Take out screw before installation ......... 3
DIN Front-Mount ................................. 3
Installing the unit ............................... 3
Removing the unit ............................. 4
Wiring Connection .............................. 5
Operation ............................................. 6
Location of keys .................................... 6
Switching on/off the unit ........................ 7
Sound adjustment ................................. 7
Display information ............................... 7
Liquid crystal display ............................. 7
Auxiliary input 7.......................................
Reset function ....................................... 7
Radio operation 7 ....................................
Switching to radio mode .................... 7
Selecting the frequency band ............ 7
Selecting station ................................ 8
Automatic memory storing&
program scanning 8 .............................
Station storing 8 ...................................
USB play operation ............................... 8
Selecting tracks in single step ........... 8
Selecting directory up/down .............. 8
Pausing playing ................................. 8
Previewing all tracks .......................... 8
Repeating the same track ................. 8
Playing all tracks in random .............. 9
Selecting songs by AS PS/ button ...... 9
SD operation ......................................... 9
Remote control .....................................10
Specication 11 .......................................
Trouble shooting ................................. 12
3
INSTALLATION
Notes:
Choose the mounting location where
the unit will not interfere with the
normal driving function of the driver.
Before nally installing the unit, connect
the wiring temporarily and make sure it
is all connected up properly and the
unit and the system work properly.
Use only the parts included with the
unit to ensure proper installation. The
use of unauthorized parts can cause
malfunctions.
Consult with your nearest dealer if
installation requires the drilling of holes
or other modications of the vehicle.
stall the unit where it does not get in In
the driver’s way and cannot injure the
passenger if there is a sudden stop, like
an emergency stop.
If installation angel exceeds 30°from
horizontal, the unit might not give its
optimum performance.
Avoid installing the unit where it would
be subject to high temperature, such as
from direct sunlight, or from hot air,
from the heater, or where it would be
subject to dust, dirt or excessive
vibration.
DIN FRONT-MOUNT
Installation Opening
This unit can be installed in any dashboard
having an opening as shown below:
Installing the unit
Be sure you test all connections rst, and
then follow these steps to install the unit.
1. Make sure the ignition is turned o, and
then disconnect the cable from the
vehicle battery’s negative (-) terminal.
2. Disconnect the wire harness and the
antenna.
3. Mount the sleeve by inserting the sleeve
into the opening of the dashboard and
bend open the tabs located around the
sleeve with a
screwdriver. Not all tabs will be able to
make contact, so examine which ones
will be most effective. Bending open the
appropriate tabs behind the dashboard
to secure the sleeve in place.
Tabs
Screwdriver
Sleeve
Dashboard
4. Reconnect the wire harness and the
antenna and be careful not to pinch any
wires or cables.
5. Slide the unit into the sleeve until it
locks into place.
6. To further secure the unit, use the
supplied metal strap to secure the back
of the unit in place. Use the supplied
hardware (Hex Nut (M5mm) and Spring
Washer) to attach one end of the strap
to the mounting bolt on the back of the
unit. If necessary, bend the metal strap
to fit your vehicle’s mounting area. Then
use the supplied hardware (Tapping
30
53mm
182mm
Produktspecifikationer
| Varumärke: | Pyle |
| Kategori: | Subwoofer |
| Modell: | PLMR87WB |
Behöver du hjälp?
Om du behöver hjälp med Pyle PLMR87WB ställ en fråga nedan och andra användare kommer att svara dig
Subwoofer Pyle Manualer
27 Januari 2025
4 Januari 2025
6 Oktober 2024
29 September 2024
23 September 2024
20 September 2024
19 September 2024
19 September 2024
19 September 2024
11 September 2024
Subwoofer Manualer
- Proel
- SSV Works
- Blaupunkt
- Definitive Technology
- Polk
- Rockford Fosgate
- Fusion
- Focal
- JL Audio
- Insignia
- Origin Acoustics
- Extron
- Morel
- Krüger And Matz
- McIntosh
Nyaste Subwoofer Manualer
14 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
10 Juni 2025
7 Juni 2025
7 Juni 2025