Pyle PMX6BU Bruksanvisning
Läs gratis den bruksanvisning för Pyle PMX6BU (12 sidor) i kategorin Stavmixer. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 10.5 recensioner. Har du en fråga om Pyle PMX6BU eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/12
PMX6BU
Wireless DJ Sound FX Audio Mixer
Wireless BT Streaming Stage & Studio Mixer System
with Karaoke Style Mic-Talkover, MP3/USB/SD Readers, FM Radio
www.PyleUSA.com
2
PMX6BU Wireless DJ Sound FX Audio Mixer
Wireless BT Streaming Stage & Studio Mixer System with
Karaoke Style Mic-Talkover, MP3/USB/SD Readers, FM Radio
• System Pairing - Connection Setup:
1. Be sure that the DJ Sound FX Audio Mixer switch is set to POWER OFF
position.
2. Turn each channel and volume controls to “ ” position.LEVEL MASTER 0
3. Next, turn ON the unit and receiver. Ensure both units are fully charged
(if the battery indicator is red, then it requires charging). LED
4. Use an Aux (3.5mm) audio cable to connect the wireless audio receiver's
into a compatible speaker audio input jack -- and ensure if the ' ' Aux
mode on the connected speaker is activated.
5. Pair your wireless receiver with the audio mixer.
*See the included 'Quick Start Guide':
Press the ‘POWER’ button on the wireless receiver (the ‘ ’ indicator a. EMIT
light will blink).
’ indicator is blinking, press the ‘ ’ button (the b. While the ‘EMIT 5.8G/BT
‘ ’ indicator light will remain solid).RXD
’ indicator light remains solid, press and hold the c. While the ‘RXD
‘ ’ button for ~ 5 seconds (or until the ‘RXD’ indicator blinks red).5.8G/BT
’ indicator light blinks red, hit the switch and power d. While the ‘RXD ON
the mixer unit.
e. Press the ‘Lock Code’ button on the rear of the mixer unit. Then press
and hold the ‘Match Code’ button for about ~5 seconds or until the
‘Work LED’ indicator blinks. The system is pairing while the ‘RXD’
indicator on the receiver blinks -- and the ‘Work LED’ indicator on the
mixer blinks. Wait until the ‘Work LED’ indicator on the mixer remains
solid to proceed to the next step.
f. While the ‘Work LED’ indicator light on the mixer remains solid, press
the ‘Lock Code’ button to secure the wireless pairing connection
(if a successful wireless pairing connection is made, the ‘ RXD’ indicator
on the receiver will stop blinking red).
Stream some sound! You can now connect the wireless receiver to a g.
compatible speaker system via Aux-Input connection cable.
www.PyleUSA.com
3
6. Adjust and set the volume control levels accordingly. Begin playing
audio through channel 1 while slowly adjusting the control to the LEVEL
desired setting. Proceed to adjust the settings accordingly for each audio
channel in use.
Limitless Speaker Connection
… … + N
5.8GHz receiver
1
3
2N
N+1
Produktspecifikationer
| Varumärke: | Pyle |
| Kategori: | Stavmixer |
| Modell: | PMX6BU |
Behöver du hjälp?
Om du behöver hjälp med Pyle PMX6BU ställ en fråga nedan och andra användare kommer att svara dig
Stavmixer Pyle Manualer
6 December 2024
6 December 2024
10 September 2024
9 September 2024
7 September 2024
26 Augusti 2024
20 Augusti 2024
20 Augusti 2024
14 Augusti 2024
13 Augusti 2024
Stavmixer Manualer
- Scarlett
- Jocel
- Russell Hobbs
- Palson
- Inventum
- Fagor
- Jata
- Vice Versa
- Innoliving
- Girmi
- AYA
- KanexPro
- Sonifex
- Tower
- Philips
Nyaste Stavmixer Manualer
11 Juni 2025
11 Juni 2025
11 Juni 2025
8 Juni 2025
7 Juni 2025
31 Maj 2025
8 April 2025
6 April 2025
5 April 2025
4 April 2025