Pyle PRJTPOTS71 Bruksanvisning

Pyle Projektionsduk PRJTPOTS71

Läs gratis den bruksanvisning för Pyle PRJTPOTS71 (2 sidor) i kategorin Projektionsduk. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 9 recensioner. Har du en fråga om Pyle PRJTPOTS71 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

www.PyleUSA.com

Features:

• Indoor/Outdoor Projector Screen

• Lightweight & Portable Display + Frame Stand

• Triangular Prism Design for Wind Stability

• Hassle-Free Setup for Quick Projection

• Matte White Fabric for Optimal Color Pickup

• Home Theater Style: HD Wide-Angle Viewing

• Used for Home, Oce & Business Applications

• *Some Assembly Required

What’s in the Box:

• Projector Screen

• Mounting Frame Stand

• Travel/Storage Bag

Technical Specs:

• Projector Viewing Screen Size: 72’’ -inch, Diagonal

• Aspect Ratio/Viewing Format: 16:9 Compatible

• Wide-Angle Viewing Area: 160° Degree

• Screen Gain: 1.15

• Projector Fabric Thickness: 0.012’’ inches (0.3mm)

• Construction Material: Engineered Steel Alloy Frame

• Assembled Dimensions: 64.0’’ x 64.0’’ x 55.9’’ -inches

Assembly

90°

Install the Vertical tube. Insert the metal frame into

the 3 Way Pipe Fittings.

The tube must be fully

inserted into the 3 Way Pipe

Fittings as much as possible.

Use the metal clip to

attach the screen on the

top bar then use the zip

tie to go through the hole

and x the screen on the

top bar.

Note:

Care should be taken to prevent the screen

from getting dirty during assembly.

This is easier with two people.

1 2 3 4

Zip tie goes into the hole

and x it on the tube.

Don't strap the zip tie too

tightly in the beginning.

Questions? Comments?

We are here to help!

Phone: (1) 718-535-1800

Email: support@pyleusa.com

www.PyleUSA.com

Pay Attention

1. Assemble the bottom triangle rst, then attach the three uprights to make the top triangle.

It is designed intentionally to assemble the last triangle with diculty in order to make the angle to be tensioned

and not get loose.

2. The screen wil have some wrinkle due to the rolling up, it will recover after a while when you tension the screen

with zip tie.

3. Please don't cut the zip tie as you may re-use it next time.

4. This zip tie can be released again just by pressing the switch.

5. When all the zip ties are xed, you can tighten it gradually to make the screen as at as possible.

6. The metal clip is used to attach the screen on the top bar. You can leave the metal clip on or remove it.

7. There are two pairs of gloves so it is better to have two person to assemble this screen.

8. Don't tighten the screen too much; otherwise, the screen will be torn.

9. If the screen is dirty, you can clean it with a white cloth; the screen is not suitable for machine washing.

10. The screen can be used indoors or outdoors, but it is not waterproof. You cannot display it outside for a long time

as the black edge around it will be damaged by water.

11. Once you done using the Outdoor Projector Screen, use the zip tie to strap the

stand and store it with the screen in the Storage Bag.

It is a little bit dicult to put the last side together,

it is intentional to make the triangle tight.

Produktspecifikationer

Varumärke:	Pyle
Kategori:	Projektionsduk
Modell:	PRJTPOTS71
Färg på produkten:	Zwart
Vikt:	119000 g
Bredd:	1200 mm
Djup:	1500 mm
Höjd:	1980 mm
Maximal viktbelastning:	80 kg
Max användarvikt:	120 kg
Justerbar sitthöjd:	Ja
Minsta lastvikt:	- kg
Lastning vikt steg:	- kg
Sittande bänkpress:	Ja
Nedåtgående repdrag armövningar:	Ja
Nedåtgående rep-pull benövningar:	Ja
Rodd:	Ja
Lat dra:	Ja
bensträckare:	Nee
Avböjningsrullar för kabeldragning:	Ja