Pyle PSPVC6 Bruksanvisning

Pyle högtalare PSPVC6

Läs gratis den bruksanvisning för Pyle PSPVC6 (6 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 3.6 stjärnor baserat på 2 recensioner. Har du en fråga om Pyle PSPVC6 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/6

6 Channel High Power Stereo Speaker Selector

PSPVC6

with Volume Control

www.PyleUSA.com

Read all documentations carefully before operating the equipment.

Retain this manual for future reference.

Congratulations for purchasing the PSPVC6 6 Channel High Power Stereo Speaker

Selector. It lets you connect up to six separate pairs of speakers to your stereo

receiver/amplier. The control center is especially convenient if you have speaker

sets in dierent rooms and want to turn them on and o independently. You can

enjoy the convenience and exibility of listening to multiple speaker pairs

simultaneously.

The control center lets you use one to six sets of speakers at a time, and is designed

to operate with a stereo receiver/amplier that has a maximum of 100 watts per

channel, and with speaker systems that have a minimum impedance of 8 ohms (see

" " on page 4)Impedance Chart

PREPARATIONS

• Use the PYLE PRO Speaker Selectors only with ampliers rated at 100 watts per

channel or less.

• Your PYLE PRO Speaker Selector is designed to accept any size cable up to 14 gauge

non-terminated speaker wire. If you're using non-terminated speaker wire, do not

use any speaker wire that is larger than 14 gauge. The lower the gauge number, the

larger the cable (e.g., 12 gauge is larger in actual physical size than 14 gauge).

• Do not hook the outputs of one selector into the inputs of another speaker

selector together.

• Before you connect the AC power source, make sure you set ALL speakers ON/OFF

to OFF

• Left and right "commons" are isolated to work with all types of ampliers

• Auto transformer impedance protection.

www.PyleUSA.com

OPERATION

1. Press button to turn all speaker pairs. Speakers ON/OFF Button: ON

Press button again turn .OFF

2. Press button to select amplier A and B.Amplier A/B Selector Button:

3. Volume Controls: Turn the control knob clockwise to increase the volume and

counter-clockwise to decrease or o.

4. Speaker Connections: The control center divides the power from your receiver/

amplier dierently to its speaker terminals. (This is especially noticeable when

you connect only one pair of speakers. If you connect more than one pair of speakers,

see " " on page 4 to selector the best terminals to connect.) Impedance Chart

For the best performance, make the connections based on how frequently you use

each set of speakers.

Cautions:

To avoid damaging your speakers or receiver/amplier:

• Be sure your receiver/amplier's power is turned o before you make the

connections.

• Never let the speaker wire's bare ends touch each other or the adjacent terminals

on the control center.

• Do not connect more than one pair of sepakers to each set of terminals.

5. Amplier Connections: Connect the speaker output of your receiver or amplier

(100 watts max). lf you are using a second amplier, connect it to the B amp terminal.

Maximum Amplier input

• 100W RMS

• 150W AVG

Maximum Output per Speaker

• 18W RMS

• 50W AVG

• 100W PEAK

• 4 or 16 OHMS LOAD

Insert the speaker’s positive (+) wires in the positive terminals, and negative (-) wires

into the negative terminals, according to the respective L (left) and R (right) terminals.

Produktspecifikationer

Varumärke:	Pyle
Kategori:	högtalare
Modell:	PSPVC6
Färg på produkten:	Zwart
Bredd:	440 mm
Djup:	330 mm
Höjd:	- mm
Impedans:	4 Ohm
Bakgrundsbelysning:	Ja
Medium effekt subwoofer:	350 W
Bostadstyp:	Bandpass
Subwoofertyp:	Passieve subwoofer
Subwooferns frekvensområde:	- Hz
Subwoofer impedans:	4 Ohm
Subwooferkänslighet:	141 dB
Toppeffekt:	700 W
Typ produkt:	Tevoren geladen subwoofer
Subwoofer maximal effekt:	700 W
Märkeffekt:	350 W