Pyle PSS8 Bruksanvisning
Läs gratis den bruksanvisning för Pyle PSS8 (8 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 3 recensioner. Har du en fråga om Pyle PSS8 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
8 Channel High Power Stereo Speaker Selector
PSS8
www.PyleUSA.com
2
Read all documentations carefully before operating the equipment.
Retain this manual for future reference.
Congratulations for purchasing the PSS88 Channel High Power Stereo Speaker
Selector. It lets you connect up to eight separate pairs of speakers to your stereo
receiver/amplier. The control center is especially convenient if you have speaker
sets in dierent rooms and want to turn them on and o independently.
You can enjoy the convenience and exibility oistening to multiple speaker pairs
simultaneously.
The control center lets you use one to eight sets of speakers at a time, and is
designed to operate with a stereo receiver/amplier that has a maximum of 100
watts per channel, and with speaker systems that have a minimum impedance of 8
ohms (see " " on page 5)Impedance Chart
PREPARATIONS
• Use the PYLE PRO Speaker Selectors only with ampliers rated at 100 watts per
channel or less.
• Your PYLE PRO Speaker Selector is designed to accept any size cable up to 14 gauge
non-terminated speaker wire. If you're using non-terminated speaker wire, do not
use any speaker wire that is larger than 14 gauge. The lower the gauge number, the
larger the cable (e.g., 12 gauge is larger in actual physical size than 14 gauge).
• Do not hook the outputs of one selector into the inputs of another speaker
selector together.
Terminal Buttons Protection Buttons
www.PyleUSA.com
3
MAKING THE CONNECTIONS
The control center divides the power from your receiver/amplier dierently to its
speaker terminals. (This is especially noticeable when you connect only one pair of
speakers. If you connect more than one pair of speakers, see " " on Impedance Chart
page 5 to selector the best terminals to connect.) For the best performance, make
the connections based on how frequently you use each set of speakers.
Cautions:
To avoid damaging your speakers or receiver/amplier:
• Be sure your receiver/amplier's power is turned off before you make the
connections.
• Never let the speaker wire's bare ends touch each other or the adjacent terminals
on the control center.
• Do not connect more than one pair of sepakers to each set of terminals.
Press open the desired SPK terminals on the control center. Insert the speakers'
positive (+) wires in the positive (red) terminals, and negative (-) wires into the
nagative (black) terminals, according to the respective L (left) and R (right) terminals.
Then press the tabs to close them.
Produktspecifikationer
| Varumärke: | Pyle |
| Kategori: | högtalare |
| Modell: | PSS8 |
Behöver du hjälp?
Om du behöver hjälp med Pyle PSS8 ställ en fråga nedan och andra användare kommer att svara dig
högtalare Pyle Manualer
7 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
högtalare Manualer
- Perfect Choice
- Medion
- Amphion
- Craftsman
- Conceptronic
- Xiaomi
- MadBoy
- Weather X
- Califone
- Karcher
- JGC
- Davis
- Logitech
- Pulver
- Tannoy
Nyaste högtalare Manualer
16 Juni 2025
15 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025