Pyle Sound 7 PHPMP39 Bruksanvisning
Läs gratis den bruksanvisning för Pyle Sound 7 PHPMP39 (2 sidor) i kategorin Headset. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 4.5 recensioner. Har du en fråga om Pyle Sound 7 PHPMP39 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Model: PHPMP39
The last playing song or broadcasting station
memory function
1.
Connect the headphone USB cable. The chargings to a USB port via
indicator will be on. The charging function is working The now .
indicator will off automatically after charging is finished. turn
2.
The charging time is about hours. 2.5
Wired headphone function
Using one additional cable with stereo 3.5mm plugs (not included) to connect
the headphone to a the Volume control to then external device. Adjust
appropriate level. Do not switch on the headphone .s for this function
Technical specifications
•
•
•
• •
•
•
•
• Input DC: 5±0.5V/180mA •
•
Bluetooth Specification: V2.1+EDR System
Audio mode: compatible with MP3 WAV and WMAformats、
Frequency range of the receiver: 88 ~ 108MHz
S/N ratio: 90dB THD 1%
Frequency response: 20Hz ~ 20KHz
Power supply: 350mA/h chargeable battery (built-in)
Continuous working time: more than 9 hours
Charging time: about 3 hours
Available for the SD/TF card up to 16GB
＞ ＜
BT / Card/ FM
Warning: when the charging light blinks twice with a beep tone
is heard, the battery needs to be charged otherwise the
headset will ff. Before you use this Bluetooth headset, turn o
please fully charge the battery.
Charging:
SD card reader function
1.Plug a SD card in the headphone, turn it on and Press BT/Card/FM
state.
button once. It comes into the
Makre sure you are using compatible file types. Digital Audio File
Compatibility: MP3, WAV, WMA
Card
USB wired headphone function
Connect the headphone USB cable s to a computer via . You can also edit
and transfer your compatible digital audio files using this method.
Turn off the headphone in the state of playing, the last song or station
being played will be recovered automatically at the next start-up.
You need to search FM programs when using the FM radio function
at the first time.
1 and hold th.Press e MFB button for 2 seconds. The headphone will be
in the status of automatically searchings. You can listen to all the FM
stations station will. Every will be played for about 2s. The power indicator
blink at the same time. When you listen to one program playing for more
than 6 seconds or the indicator stops ing, searching finished. The blink is
headphone will store all the s searched. You can press the PRE/ tations
NEXT button to select the you want. and browse between station
Note: search / scan stations in an area of good signal reception.
FM radio function
Produktspecifikationer
| Varumärke: | Pyle |
| Kategori: | Headset |
| Modell: | Sound 7 PHPMP39 |
Behöver du hjälp?
Om du behöver hjälp med Pyle Sound 7 PHPMP39 ställ en fråga nedan och andra användare kommer att svara dig
Headset Pyle Manualer
17 Augusti 2024
5 Augusti 2024
28 Juli 2024
Headset Manualer
- Senal
- Steren
- GOgroove
- Sandberg
- Steelplay
- Etymotic
- Ailihen
- Astro
- Panasonic
- ASTRO Gaming
- Asus
- Shokz
- Bigben Interactive
- Anker
- Amazon
Nyaste Headset Manualer
19 Oktober 2025
11 Oktober 2025
10 Oktober 2025
10 Oktober 2025
10 Oktober 2025
10 Oktober 2025
10 Oktober 2025
9 Oktober 2025
9 Oktober 2025
9 Oktober 2025