QSC Axon C1 Bruksanvisning
QSC
Inte kategoriserad
Axon C1
Läs gratis den bruksanvisning för QSC Axon C1 (22 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 3 recensioner. Har du en fråga om QSC Axon C1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/22
QSC, LLC • 1675 MacArthur Boulevard • Costa Mesa, CA 92626
Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174
© 2020 QSC, LLC all rights reserved. QSC and the QSC logo are registered trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. All other trademarks are the
property of their respective owners. Patents may apply or be pending.
www.qsc.com
unIFY Control Panel
Axon C1 Configuration
Attero Tech by QSC unIFY Control Panel
Axon C1 Configuration
QSC, LLC 2020
The configuration form for the Axon C1 is organized into three key sections:
• C1 Control - Basic configuration options for the C1 such as menu mode brightness and IP address
• 3rd Party Devices List - Configuration for control of 3rd Party devices using UDP or TCP messaging
• Menu Builder - Configuration for the structure of menu events
C1 Control
Device
Display
Rotation
None - Used for standard vertical
mounting.
90° - Rotates the display 90° to the
right for horizontal mounting.
Timeout
Set the timeout for the screen to turn off.
Values can be set from 10 seconds to
10 minutes. A lower value will help
prevent potential damage to the screen from burn-in.
Attero Tech by QSC unIFY Control Panel
Axon C1 Configuration
QSC, LLC 2020
Lightbar
Checking the setting links the lightbar to the display timeout. Clearing the check mark allows meter
response to continue independent of the display timeout.
Security
Enable/Disable security on C1. When enabled the user is required to enter a 4-digit pin to access device
functions. The user pin is also configurable. This can only be changed while the security option is disabled.
Brightness
Brightness levels can be set for the Display and Light bar. Use the slider to adjust the level from 1 (dim) to
10 (bright).
Network
The network section allows customization of the devices name. By default this is AxonC1-xxxxxx where xxxxxx
is the last 6 digits of the devices MAC address. The custom name can be a maximum of 16 characters long
and must be unique among the C1's on a system.
The C1's IP address is configurable. If the Static IP check box is clear, the device will use a "dynamic" IP
address. This is the default. Users can assign a static IP by checking the
Static IP check box and then filling
in the
Address and Netmask fields.
Menu Mode
Before any configuration can be
done, the C1 Menu Mode must be
selected. The options are either "Q-
SYS" mode or "3rd Party" mode.
Use "Q-SYS" mode when the C1 is
to used with a Q-Sys Core DSP and
will be married to a C1 plug-in using
Q-Sys Designer. For everything
else, select "3rd party".
Produktspecifikationer
| Varumärke: | QSC |
| Kategori: | Inte kategoriserad |
| Modell: | Axon C1 |
Behöver du hjälp?
Om du behöver hjälp med QSC Axon C1 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad QSC Manualer
1 April 2025
31 Januari 2025
31 Januari 2025
31 Januari 2025
31 Januari 2025
29 Januari 2025
14 Januari 2025
14 Januari 2025
19 December 2024
19 Oktober 2024
Inte kategoriserad Manualer
- Reloop
- MOOOV
- Hooker
- StrikeMaster
- Ergotec
- Kasp
- Snoes
- Toolland
- Ulsonix
- NEO Tools
- Eden
- JBL
- Beemoo
- Suunto
- Allen & Heath
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025