QTX SW-3LED Bruksanvisning
QTX
Effektmaskin
SW-3LED
Läs gratis den bruksanvisning för QTX SW-3LED (3 sidor) i kategorin Effektmaskin. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 2 recensioner. Har du en fråga om QTX SW-3LED eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/3
www.avslgroup.com 160.566UK User Manual
SW-3LED
LED SNOW MACHINE 800W
Item ref: 160.566UK
User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introduction:
Thank you for choosing the SW-3LED 800W LED snow effect machine for small to mid-sized venues and events. This unit
utilises a heavy-duty fan to convert snow fluid into a blizzard of foam particles, giving the impression of snowfall. The
snow can then be highlighted with an array of colours from the 6 bright LEDs housed in the front of the unit. Wired
remote control is included for snow on demand operation and the additional RF remote can be used for more precise
control of the LED effects.
In the box:
Your SW-3LED should reach you in good condition and should be supplied with IEC mains lead(s), wired and wireless
remote controls and a mounting bracket with thumbscrews. If there are any signs of damage or items missing from the
packaging, contact your dealer immediately.
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event of a spillage,
disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then check the unit before
continuing use.
Please do not open cover, contains high voltage. This product is not
serviceable or repairable by the end user. Please refer to qualified
personnel for service and repair.
er or professional when unit malfunction.
www.avslgroup.com 160.566UK User Manual
Placement:
The SW-3LED has a built-in snow fluid container and should always be operated in an upright position. If free-standing
please ensure that the unit is positioned on a stable, non-slip surface. If mounted at height, use the integral mounting
bracket and attach a safety cable for added security.
Safety:
• Check for correct mains voltage and condition of IEC lead before connecting to power outlet.
• Check the condition of the remote lead and ensure that it is not trapped.
• This unit must be earthed.
• This unit produces a snow effect using foam, which may cause a slip hazard on some floor surfaces.
Cleaning:
• Use a soft dry or slightly damp to clean the casing.
• Do not use strong solvents for cleaning the unit.
• Clean the foam mechanism periodically by operating with distilled water instead of snow fluid.
Rear Panel:
Setting up:
The SW-3LED requires snow fluid, which forms small foam drops to create the snow effect.
It is recommended to use QTX snow fluid for best results (160.578, 160.579).
• Unscrew the top cap of the fluid tank (removable) and fill with the selected snow fluid.
• Replace the cap and close securely, ensuring the pipe is fed down to the bottom of the bottle so that a consistent
flow of fluid is supplied to the machine.
• Connect the wired remote control to the connector on the rear panel (2).
• Connect the IEC mains lead supplied to the rear mains inlet (3).
Remote control operation:
The SW-3LED comes supplied with both a wired and RF wireless remote control. The wired control is used for snow
control and has only a red square button in the centre and 2 green LEDs at the top. After switching on the unit using the
power button (1) wait for the 2 LEDs to light up before beginning the snow effect. Press the red square button once to
release the snow, press again to stop. For operation using the RF remote control please see below.
1.
Power on/off rocker switch
2.
Remote control connection
3.
Mains inlet (IEC male) and fuse holder
4.
Fluid level indicator
Produktspecifikationer
| Varumärke: | QTX |
| Kategori: | Effektmaskin |
| Modell: | SW-3LED |
Behöver du hjälp?
Om du behöver hjälp med QTX SW-3LED ställ en fråga nedan och andra användare kommer att svara dig
Effektmaskin QTX Manualer
4 Oktober 2025
4 Oktober 2025
3 Oktober 2025
3 Oktober 2025
14 September 2024
14 September 2024
4 September 2024
24 Augusti 2024
14 Augusti 2024
13 Augusti 2024
Effektmaskin Manualer
- Futurelight
- Dateq
- DJPower
- DJ Power
- Adj
- Drawmer
- Fun Generation
- NUX
- IMG Stageline
- Antari
- Mooer
- Magic FX
- IMG Stage Line
- Viking
- Lexicon
Nyaste Effektmaskin Manualer
27 September 2025
23 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025
22 September 2025