Radial Engineering JS3 Bruksanvisning


Läs gratis den bruksanvisning för Radial Engineering JS3 (6 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 2.5 recensioner. Har du en fråga om Radial Engineering JS3 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/6
www.radialeng.com
JS•3
3-Way Microphone Splitter
Users Guide
Radial Engineering Ltd.
1845 Kingsway Ave., Port Coquitlam, BC V3C 0H3, Canada
Tel: 604-942-1001 • Fax: 604-942-1010
email: info@radialeng.com
Radial JS3 Users Guide V2.3 - Part #: R870 1060 00 / 05-2025
Specications and appearance subject to change without notice.
Copyright © 2010 Radial Engineering Ltd.
JS•3 User Guide
Radial Engineering
INPUT PANEL
1. -30dB PAD
Allows line-level sources to
connect to the JS3’s input.
2. Mic input
For low impedance microphone signals.
3. Direct-1 thru
Mic-level direct output will pass
phantom power to microphone.
4. Bookend design
14 gauge steel outer shell creates
protective zone around connectors
and switches.
5. Full-bottom no-slip pad
This provides electrical isolation
and plenty of "stay-put" friction to
keep the JS3 in one place.
OUTPUT PANEL
6. Isolated output-2
Mic-level transformer-isolated.
7. Ground lift (isolated-2)
Lifts the ground pin-1 on the
isolated-2 XLR output connector.
8. Isolated output-1
Mic-level transformer-isolated.
9. Ground lift (Isolated-1)
Lifts the ground pin-1 on the
isolated-1 XLR connector.
CONSTRUCTION
10. Steel I-beam enclosure eliminates
stress that could torque the PC board
and cause solder joint failure.
11. Military-grade double-sided PCB
with plated through-holes is bolted to
welded steel stando󰀨s.
12.Jensen transformer o󰀨ers
outstanding audio performance.
13. Sturdy PC mounted switches
are high-cycle rated for long life.
96 7 8
1 52 3 4
10 11 12
13


Produktspecifikationer

Varumärke: Radial Engineering
Kategori: ej kategoriserat
Modell: JS3

Behöver du hjälp?

Om du behöver hjälp med Radial Engineering JS3 ställ en fråga nedan och andra användare kommer att svara dig