Radial Engineering Twin-Iso Bruksanvisning
Radial Engineering
Inte kategoriserad
Twin-Iso
Läs gratis den bruksanvisning för Radial Engineering Twin-Iso (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 6 recensioner. Har du en fråga om Radial Engineering Twin-Iso eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
9
TWIN-ISO SPECIFICATIONS
Frequency response 10Hz to 50kHz +/- 1dB
Max output level +21dBu (20Hz, 1% THD)
Phase distortion 0.3° at 20Hz
Total harmonic distortion 0.001% THD @1k, +4dBu (0.035% at 20Hz)
Common-mode rejection 94dB @ 60Hz (83dB @ 3kHz)
Inputs Balanced, line-level, pin-2 hot
Outputs Balanced, line-level, pin-2 hot
Power requirement None, completely passive
Size 3.25" x 5" x 1.875"
Weight 2 lbs.
8
INPUT PANEL
1. Ground lift (inputs) Lifts
the ground pin-1 on both
XLR input connectors.
2. Input-1 & 2 For low
impedance, balanced line-
level signals.
3. Bookend design 14
gauge steel outer shell
creates protective zone
around connectors and
switches.
OUTPUT PANEL
4. Output-1 & 2 line-level
transformer-isolated
outputs.
5. Polarity reverse 180°-
Polarity reverse switch for
outputs-1 & 2.
6. Full-bottom no-slip pad
This provides electrical
isolation and plenty of
"stay-put" friction to keep
the Twin-ISO in one place.
CONSTRUCTION
7. Ultra rigid steel I-beam
enclosure eliminates
stress that could torque
the PC board and cause
solder joint failure.
8. Jensen transformers
off er outstanding audio
performance.
9. Military-grade double-
sided PCB with plated
through-holes is bolted to
welded steel standoff s.
10. Sturdy high-cycle PCB
mounted switches are
rated for long life.
www.radialeng.com
Radial Engineering Ltd.
1845 Kingsway Ave., Port Coquitlam, BC V3C 1S9, Canada
Tel: 604-942-1001 • Fax: 604-942-1010
email: info@radialeng.com
Twin-Iso
™
True to the Music
Radial Twin-Iso user guide - Part #: R870 1025 00 / 10-2021
Appearances and specifi cations subject to change without notice.
Copyright © 2017, all rights reserved.
1
7
2 3
Twin-Iso
™
User Guide
Radial Engineering Ltd.
Twin-Iso
™
User Guide
Radial Engineering Ltd.
RADIAL LIMITED THREE YEAR
TRANSFERABLE WARRANTY
RADIAL ENGINEERING LTD. (“Radial”) warrants this product to be free from
defects in material and workmanship and will remedy any such defects free
of charge according to the terms of this warranty. Radial will repair or replace
(at its option) any defective component(s) of this product (excluding fi nish and
wear and tear on components under normal use) for a period of three (3) years
from the original date of purchase. In the event that a particular product is no
longer available, Radial reserves the right to replace the product with a similar
product of equal or greater value. To make a request or claim under this limited
warranty, the product must be returned prepaid in the original shipping container
(or equivalent) to Radial or to an authorized Radial repair center and you must
assume the risk of loss or damage. A copy of the original invoice showing date
of purchase and the dealer name must accompany any request for work to be
performed under this limited and transferable warranty. This limited warranty shall
not apply if the product has been damaged due to abuse, misuse,misapplication,
accident or as a result of service or modifi cation by any other than an authorized
Radial repair center.
THERE ARE NO EXPRESSED WARRANTIES OTHER THAN THOSE ON THE
FACE HEREOF AND DESCRIBED ABOVE. NO WARRANTIES WHETHER
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE SHALL EXTEND BEYOND THE RESPECTIVE WARRANTY
PERIOD DESCRIBED ABOVE OF THREE YEARS. RADIAL SHALL NOT
BE RESPONSIBLE OR LIABLE FOR ANY SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSS ARISING FROM THE USE OF THIS
PRODUCT. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY VARY DEPENDING ON
WHERE YOU LIVE AND WHERE THE PRODUCT WAS PURCHASED.
User Guide
True to the Music
®
®
10
4
5
6
Produktspecifikationer
| Varumärke: | Radial Engineering |
| Kategori: | Inte kategoriserad |
| Modell: | Twin-Iso |
Behöver du hjälp?
Om du behöver hjälp med Radial Engineering Twin-Iso ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Radial Engineering Manualer
2 April 2025
25 Februari 2025
25 Februari 2025
11 Februari 2025
11 Februari 2025
11 Februari 2025
11 Februari 2025
11 Februari 2025
11 Februari 2025
11 Februari 2025
Inte kategoriserad Manualer
- Homematic IP
- Park Tool
- Oras
- ART
- Nitek
- Scanstrut
- Lec
- Kambrook
- Texas Instruments
- EWT
- Audio-Technica
- Vox
- Cambo
- Kubota
- Brinsea
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025