Radioddity GC-5 Bruksanvisning
Radioddity
Walkie talkie
GC-5
Läs gratis den bruksanvisning för Radioddity GC-5 (2 sidor) i kategorin Walkie talkie. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 7 recensioner. Har du en fråga om Radioddity GC-5 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
Radioddity GC-5 Manual Programming Steps
To enter a channel from the front panel, the steps below should help:
The Menu(Green) key is used to invoke the Menu system, Enter the selection part of an option, and
Confirm that option.
The Back (Red) key is used to exit a Menu option (or it will automatically return after a short delay)
Once the repeater Receive frequency is entered via the VFO Mode and using the Keypad, the Menu
options will help you set the other parameters.
Example:
2m Repeater
146.685 Receive frequency
The offset is .6 MHz
Shift Direction is - (minus)
Transmit CTCSS Tone is 100 Hz
Receive CTCSS Tone is 100 Hz
Enter VFO (Frequency) Mode using VFO/MR key.
Use the Keypad to enter 145685 (the Decimal Point and extra 2 Zeros will be added automatically)
Press Menu, Option 2 TX power
Press Menu to Select
Use Up/Down Arrows as needed to select the Power setting
Press Menu to Confirm
Exit to Return (or scroll to the next Option)
Press Menu, then 1 2 to set TX CTCSS tone
Press Menu to Select
Use Up/Down Arrow as needed to scroll to 100.0 Hz, or press the first 3 digits (1 0 0), scroll to 100.0
Hz
Press Menu to Confirm
Exit to Return (or scroll to the next Option)
Press Menu, then 1 0 to set RX CTCSS tone
Press Menu to Select
Use Up/Down Arrow as needed to scroll to 100.0 Hz, or press the first 3 digits (1 0 0), Scroll to 100.0
Hz
Press Menu to Confirm
Exit to Return (or scroll to the next Option)
Press Menu, then 2 8 to set Shift Direction
Press Menu to Select
Use Up/Down Arrows as needed to scroll to Minus
Press Menu to Confirm
Exit to Return (or scroll to the next Option)
Press Menu, then 2 9 to set the Frequency Offset
Press Menu to Select
Enter 000600 (The decimal point is automatically inserted after the 3rd digit is entered.)
Press Menu to Confirm
Exit to Return (or scroll to the next Option)
Press Menu, then 3 0 to set the Channel to store the settings
Press Menu to Select
Use Up/Down arrows as needed to find a blank (unused) Channel.
Channels that have been used to store memory will have CH preceding the number.
Press Menu to Confirm (when a blank channel number had been selected)
Voice Prompt: Receiving Memory
Exit to Return
Once Menu is pressed, you can use the Up/Down arrows to scroll through the settings, or directly
address them using a 2 digit selection.-
Additional settings can be selected as needed prior to storing the channel.
If a setting needs to be altered after the channel is stored, the channel will need to be deleted using
Menu option 31, then saved to the same channel using the additional options.
Produktspecifikationer
| Varumärke: | Radioddity |
| Kategori: | Walkie talkie |
| Modell: | GC-5 |
Behöver du hjälp?
Om du behöver hjälp med Radioddity GC-5 ställ en fråga nedan och andra användare kommer att svara dig
Walkie talkie Radioddity Manualer
18 Juli 2025
18 Juli 2025
18 Juli 2025
18 Juli 2025
Walkie talkie Manualer
- Oricom
- Uniden
- KSUN
- Wouxun
- DeWalt
- Topsung
- Motorola
- EVOLVEO
- Baofeng
- Sencor
- Lexibook
- Audiovox
- MaxTalker
- Icom
- Cobra
Nyaste Walkie talkie Manualer
1 September 2025
1 September 2025
1 September 2025
1 September 2025
1 September 2025
31 Augusti 2025
24 Augusti 2025
23 Augusti 2025
23 Augusti 2025
23 Augusti 2025