Raikko Cone Bluetooth Bruksanvisning
Raikko
Vagga/dockningsstation
Cone Bluetooth
Läs gratis den bruksanvisning för Raikko Cone Bluetooth (4 sidor) i kategorin Vagga/dockningsstation. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 9 recensioner. Har du en fråga om Raikko Cone Bluetooth eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
Cone Bluetooth® Speaker
IntroductIon
Dear Cu stomer, Th ank you for choosing a RAIKKO® product.
The RAIKKO® Cone Bluetooth® is a mobile speaker system.
It transmits audio signals through a Blu etooth ®
or cable
(3.5 mm jack) connection.
OFF NO
oVErVIEW
A On/off switch
B Microphone
c Volume –/Back
d Play/Pause
E Volume +/Forward
F Pairing / Answer call
G Charging socket
(Micro USB)
H Line IN socket (3.5 mm)
I USB charging cable
J 1 line IN cable (3.5 mm jack)
K LED display
In tHE BoX
1 RAIKKO ®
Cone Bluetooth®
Speaker, 1 USB charger cable,
1 line IN cable (3.5 mm jack), 1 carrying pouch
SWItcHInG on/oFF
Slide the switch ( ) to the right (ON) to turn the speaker on. A
Slide the switch ( ) to the left (OFF) to turn the speaker of f.A
cAutIon!
The speaker is automatically in Blue tooth® mode when
switched on. If a device that has already been connected
is within range, it will connect automatically.
connE ctIon VIA BLuEtootH ®
After being switched on, the device will be in “pairing mode”.
Activate the Bluetooth®
interface on your audio device ( ) and pair M
the speaker with it.
If there is a Bluetooth®
-enabled device within range that has
already been paired with the speaker, this will be connected rst.
Disconnect this device if required and connect another Bluetooth®-
enabled device.
For additional information please consult the user manual for your
device (M).
The maximum range of the wireless signal is 10 m.
Large obstacles, such as furniture, walls and electronic devices,
can limit the range.
cAutIon!
It is n ot possible to pair multiple devices at the same
time. On ly one audio device can access the speaker at
any given time.
connEctIon BY cABLE
To play audio in cable mode, connect the Line IN cable ( ) into the J
appropriate speaker socket (H).
Connect the other end of the cable to the headphone output on your
audio device ( ) or to the audio output on a computer/laptop (M n).
cAutIon!
Playback via Bluetooth® connection stops automatically
when a cable is inserted. If the cable is removed, playback
through Bluetooth® may be restarted (if an audio device is
paired).
AudIo PLAYBAcK
The playback function on the audio device can be controlled
remotely from the speaker if the audio device supports this feature.
Operation using the speaker’s function keys:
Press key ( ) once briey to start or stop playback.d
Press key ( ) once briey to change to the next track.E
Press key ( ) once briey to restart the current title from the c
beginning, or repeatedly to switch to previous tracks.
cAutIon!
In cable mode, audio can only be played back (play/pause,
next/previous track) through the connected audio device.
VoLuME
When the speaker is switched on, the volume will be set to a
medium level. The volume can be controlled using the volume
control function on your audio device or directly using the keys on
the speaker.
Hold down the + key ( ) to increase the volume.E
Hold down the – key ( ) to decrease the volume.c
cAutIon!
It is possible to overload the speakers with a high signal level.
Choose a volume level that will not distort the sound.
SPEAKErPHonE /AnSWErInG / EndInG cALLS
The speaker has a built-in microphone. When using a Bluetooth®-
enabled mobile phone, you can use the speaker-phone function.
To answer a call, press the phone key ( ) briey (marked with F
a phone symbol). To end a call, press the phone key (F) again
(marked with a phone symbol). Reject calls by holding down the
phone key (F).
cHArGInG tHE IntEGrAtEd BAttErY
Charge the speaker completely before using it for the rst time. The
rst charge cycle can take up to 3 hours. Connect the speaker to
the USB port on a PC/MAC™ or a USB mains adapter to charge it.
Use the connection cable (J) provided.
Connect one end to the speaker’s charging socket (Micro USB) ( ) G
and the other end to the appropriate USB port.
The LED display ( ) will turn red while charging.K
The LED display ( ) will turn off when the battery is fully charged.K
A complete charge cycle will last approximately three hours.
Dimensions: (L) 74 × (W) 74 × (H) 65 mm
Weight: 252 g
Music output: 5 watts RMS
Speaker:
Frequency range:
45 mm diaphragm
90 Hz–20 kHz
Battery type: Lithium polymer
Charging voltage: 5 V (USB)
Connections:
Bluetooth®
Standard:
1× Micro USB (charging socke t),
1× Line IN (3.5 mm),
Bluetooth® (wireless)
3.0 (A2DP, AVRCP)
tEcHnIcAL SPEcIFIcAt IonS
Produktspecifikationer
| Varumärke: | Raikko |
| Kategori: | Vagga/dockningsstation |
| Modell: | Cone Bluetooth |
Behöver du hjälp?
Om du behöver hjälp med Raikko Cone Bluetooth ställ en fråga nedan och andra användare kommer att svara dig
Vagga/dockningsstation Raikko Manualer
29 Juli 2024
Vagga/dockningsstation Manualer
- LG
- Laney
- Urban Revolt
- JBL
- Pyle
- V7
- Tripp Lite
- Leitz
- Audiovox
- Technaxx
- Fenton
- Wavemaster
- Lenco
- Kogan
- Marantz
Nyaste Vagga/dockningsstation Manualer
5 April 2025
31 Mars 2025
26 Mars 2025
12 Mars 2025
12 Mars 2025
10 Mars 2025
27 Februari 2025
27 Februari 2025
16 Februari 2025
11 Februari 2025