Raspberry Pi 7996945 Bruksanvisning


Läs gratis den bruksanvisning för Raspberry Pi 7996945 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 10 recensioner. Har du en fråga om Raspberry Pi 7996945 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
eRA Connect2Pi Transceiver Dongle Quick Start Guide
Era Connect2Pi Quick Start Guide V1 1 Copyright LPRS 2014 1 |
P a g e
easyRadio Advanced Connect2Pi Dongle Quick Start
Instructions.
These instructions demonstrate the process to get up and running quickly using the connect2Pi radio module from
LPRS on a Raspberry Pi running Rasbian.
It should be possible that other flavours of linux/raspberryPi should be similar.
Step 1:
Plug the Connect2Pi module into either of the USB sockets on the Raspberry Pi
Note: Rasbian and most recent builds of RaspberryPi Distro’s have the FTDI drivers built in.
If yours does not, the easiest fix is to ‘sudo apt upgrade’ and get the latest distribution, otherwise follow this -get dist-
link:
http://www.ftdichip.com/Support/Documents/AppNotes/AN_220_FTDI_Drivers_Installation_Guide_for_Linux%20.
pdf
Step 2: Open up a terminal. At the Prompt type dmesg:
You should get a response containing something like:
Note the line: FTDI USB Serial Device converter now attached to ttyUSB0


Produktspecifikationer

Varumärke: Raspberry Pi
Kategori: Inte kategoriserad
Modell: 7996945

Behöver du hjälp?

Om du behöver hjälp med Raspberry Pi 7996945 ställ en fråga nedan och andra användare kommer att svara dig