RDL D-TPS7A Bruksanvisning

RDL Inte kategoriserad D-TPS7A

Läs gratis den bruksanvisning för RDL D-TPS7A (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 3 recensioner. Har du en fråga om RDL D-TPS7A eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

Twisted Pair Format-A

Modules D-TPS7A & D-TPP7A

Modules DS-TPS7A & DS-TPP7A

Format-A Passive Single Pair Sender

RDL



659 6

St.



Prescott, AZ., USA 86301



(928) 443-9391



FAX (928) 443-9392



www.rdlnet.com



Stereo Audio Input Combined to Mono Output



Input on Mini-jack



Switch Selects which RJ45 Pair (A, B or C) is Fed



Signal and Power Pair Pass-Through between TP CABLE RJ45 Jacks



Passive Circuitry Does Not Require Power



Galvanic Isolation through a Studio-Quality Transformer



Daisy-Chain with Single-Pair or Two-Pair Format-A Senders

The -TPS7A is a single-pair audio sending module compatible with RDL

Format-A twisted pair products. The front panel

features a single stereo mini-jack intended for stereo consumer line level audio sources. A studio-quality transformer

provides isolation between the audio source and the RJ45 TP CABLE.

The -TPS7A is a single-pair sender, feeding the input signal to the cable pair set on the rear-panel

switch during installation. This module drives only one cable pair, therefore a TP CABLE RJ45 jack is

provided to accept signals and power from other mic-level or line-level Format-A senders. Two other

single-pair senders may be chained to a TP CABLE jack, or a single two-pair sender may be

connected. If three single-pair senders are connected together, each sender must feed a different

pair: A, B or C. The -TPS7A must be set to feed pair A if it is connected together with an RDL two-pair

sender that feeds stereo audio on pairs B and C.

The -TPS7A is a passive module that does not require power to operate. If power is present on a

cable connected to a TP CABLE jack, that power is passed through to the modules connected to the

other TP CABLE jack.

The D-TPP7A is the same as the D-TPS7A but includes a connection for composite video pass through.



D-TPS7A or DS-TP76A Format-A Audio Sender



Video Monitor Pass-Through



Available in RDL White/Gray (D-TPP7A)



Available in Stainless Steel (DS-TPP7A)

D-TPS7A

DS-TPS7A

DS-TPP7A

D-TPP7A

Produktspecifikationer

Varumärke:	RDL
Kategori:	Inte kategoriserad
Modell:	D-TPS7A
Vikt:	21000 g
Bredd:	240 mm
Djup:	420 mm
Höjd:	380 mm
AC-ingångsspänning:	230 V
AC-ingångsfrekvens:	50 - 60 Hz
Energieverbruik:	3.5 kVA
Variabel svetsström:	Ja
Minsta toalett:	40 A
Max toalett:	140 A
Minsta elektroddiameter:	0.6 mm
Maximal elektroddiameter:	0.9 mm
Svetsprocesser:	MIG (GMAW)