Real Cable NANO-LP1 Bruksanvisning
Real Cable
Inte kategoriserad
NANO-LP1
Läs gratis den bruksanvisning för Real Cable NANO-LP1 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 5.5 recensioner. Har du en fråga om Real Cable NANO-LP1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
PHONOGRAPHIC PRE-
AMPLIFIER
Model:NANO-LP1
INSTRUCTION Manual
Congratulations to the purchase of this NANO-LP1 preamplifier.
Please read this manual thoroughly prior to using the unit.
INSTRUDUCTION
This NANO-LP1 stereo preamplifier for turntables allows connecting a turntable to audio
equipment without phono input. It deploy RIAA equalization circuitry that can recover the original
sound from a phonographic disk.
INSTALLATION
Connect the input plugs (2) to your turntable. CAUTION: Make sure that the turntable is fitted with
a magnetic cartridge. Connect the output (1) to the input of your amplifier, mixer, sound card, etc.
Make sure to select the correct input on the amplifier, mixer, etc. Only use good quality screened
cable.
If you want to use the unit in a fixed installation, you can connect it (3) to a regulated 9Vdc power
supply. The preamplifier can then be switched on and off via the switch (4).
The preamplifier can also be powered by a 9V battery, it best work by battery.
Unscrew the 4 screws on the side and open the unit.
Connect the 9V battery to the 9V clip.
When the sound quality becomes weak, the battery needs to be replaced.
SPECIFICATIONS
Power supply:.................................................................................. 9 Vdc
Current consumption: .......................................................1 mA (average)
Input impedance:....................................................................... 50 KOhm
Output impedance: ................................................................... 50 KOhm
Amplification:.................................................................................... 34dB
Frequency range: ........................................................... 30 Hz – 20 KHz
Compensation:……………………………………………….RIAA correction
Safety recommendations:
- Do not expose the unit to high temperatures.
- Unplug the unit from the mains during a thunder storm or when it is not in use for a longer
period of time.
- If the unit has not been used for a longer period of time, condensation can occur inside the
housing. Please let the unit reach room temperature prior to use.
- For indoor use only.
- Keep out of the reach of children.
- Do not use the unit in a humid environment.
- Do not pour liquids on the ventilation holes.
- Unplug the unit from the mains prior to repairs and maintenance.
Do not attempt to make any repairs yourself. This would invalid your warranty.
Do not make any changes to the unit. This would also invalid your warranty.
The warranty is not applicable in case of accidents or damages caused by inappropriate use or
disrespect of the warnings contained in this manual.
PRE-AMPLIFICATEUR
PHONO
Modèle: NANO-LP1
Manuel d’UTILISATION
Félicitations pour l'achat de ce pré-amplificateur phono NANO-LP1.
S'il vous plait, lisez attentivement ce manuel avant d'utiliser l'appareil.
Produktspecifikationer
| Varumärke: | Real Cable |
| Kategori: | Inte kategoriserad |
| Modell: | NANO-LP1 |
Behöver du hjälp?
Om du behöver hjälp med Real Cable NANO-LP1 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Real Cable Manualer
27 Mars 2025
Inte kategoriserad Manualer
- Plugwise
- Enovate
- Upo
- Privileg
- Pulsar
- Mean Well
- Gabor
- Seecode
- Osann
- Bionaire
- Burris
- Cuisinart
- Aligator
- Naturn Living
- Tennsco
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025