Reef One Biorb Biube Bruksanvisning
Läs gratis den bruksanvisning för Reef One Biorb Biube (2 sidor) i kategorin Akvarium. Guiden har ansetts hjälpsam av 23 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 12 recensioner. Har du en fråga om Reef One Biorb Biube eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
ENGLISH
UK 01603 710339
US 877-928-7333
FR 0811 850 113
DE 0800-181-9091
info@reef-one.com
www.reef-one.com
30L / 8US Gals = 36Kg / 80lbs
35L / 9US Gals = 40Kg / 88lbs
60L / 16US Gals = 72Kg / 160lbs
This guide will help you understand how
your aquarium works and how to create a
healthy environment for your fish. Please
read these instructions carefully before
filling your aquarium with water.
This is not a toy, adult supervision is
recommended. Removing the serial
number or dismantling your aquarium
will invalidate your guarantee.
L
L
LL
DO NOT MOVE
WHEN FULL
5
123
4
6
1. Carefully remove contents from the
box and check. Choose a suitable
location for your aquarium noting all
the advice above and place your
aquarium on a strong and level
surface. Remember the aquarium
needs a power source within reach.
2. Remove plastic wrapper from filter
cartridge (A) then offer up cartridge to
base of bubble tube (B), locate tabs
and twist in a counterclockwise
direction ensuring all cartridge tabs are
fully located. New cartridges are
available from a biOrb dealer.
3. Remove the light unit and lid from
the biOrb then take the bubble tube
and filter cartridge assembled in step 2
and insert into the biOrb. Turn the bubble
tube clockwise until it locks in position.
When correctly located, the bubble tube
and filter will remain in place.
4. Wash the ceramic media supplied
thoroughly before placing around the
filter body, ensuring none remains on top.
Use only ceramic media supplied, do not
use aquarium gravel. Discard any pieces
smaller than a pea.
5. Connect the airline to the pump as
shown and place in a suitable position.
Positioning the pump higher than the
aquarium water level will prevent water
leakage or damage to pump should
valve failure occur.
Setting up your aquarium
6. Plug the pump and light unit plug into
the separate sockets on the transformer
supplied, then plug the transformer into
the power source and turn on. The pump
should be left running 24hrs a day, only
switch it off during filter cartridge
changes and cleaning.
7. Fill the aquarium with tap water to
approximately 3”/7.5cm above the top
of the bubble tube and add Water
Conditioner. Leave the aquarium
running for at least 24 hours before
adding Biological Booster and then you
will be ready to add your first fish. Do
not immerse the light unit in water.
DO NOT PLACE ON OR
NEAR ELECTRICAL ITEMSAVOID
HOT AREAS AVOID
SUNLIGHT
7
3’’- 7.5cm
Produktspecifikationer
| Varumärke: | Reef One |
| Kategori: | Akvarium |
| Modell: | Biorb Biube |
Behöver du hjälp?
Om du behöver hjälp med Reef One Biorb Biube ställ en fråga nedan och andra användare kommer att svara dig
Akvarium Reef One Manualer
2 April 2025
5 September 2024
Akvarium Manualer
- Colombo
- Juwel
- Ferplast
- Dennerle
- Ciano
- Eheim
- AquaOne
- Tetra
- Sera
- SuperFish
- Fishome
- Fluval
- Oase
- Aquatlantis
- Aqua One
Nyaste Akvarium Manualer
9 April 2025
4 April 2025
3 April 2025
1 April 2025
1 April 2025
10 Mars 2025
7 Januari 2025
29 December 2024
10 Oktober 2024
24 September 2024