Rega Fono Mini A2D Bruksanvisning

Rega mottagare Fono Mini A2D

Läs gratis den bruksanvisning för Rega Fono Mini A2D (1 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 10 recensioner. Har du en fråga om Rega Fono Mini A2D eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/1

Exceptional Hi-Fi designed and manufactured in England www.rega.co.uk

FFono mini

ono mini

ono mini ono mini A2D

A2D

A2D A2D

Moving Magnet disc stage with USB

Moving Magnet disc stage with USBMoving Magnet disc stage with USB

Connections via USB to PC

To transfer vinyl to your PC You will need to install

a digital audio editor. Such software is widely

available as a free download (such as Audacity)

from the internet. This is a simple interface which

allows monitoring of volume and balance whilst

transferring your audio to your PC hard drive.

Audio editing software includes a level meter

which indicates the output level achieved when

playing a piece of vinyl. You should adjust the

output as necessary via the ‘Level’ control located

on the front panel. Always take special note of

record levels to ensure optimum recording quality.

Output Level Dial

Specifications

Input sensitivity: 5mV for 500mV output

Input loading: 47k +100pF

Maximum input level: 70mV @ 1kHz

Output Impedance: 100 Ohms

Signal to noise ratio: 78dBA ref 5mV

Power requirements: 24VAC 85mA

Input for full scale digital output: 7.5mV

WARNING

Only use the supplied mains adaptors with this product.

EURO-PS2

Input 230V-50Hz 25mA

Output 24V-100mA

AUS/NZ-PS2

Input 230V-30mA

Output 24V-100mA

USA/CANADA-PS2

Input 115V-60mA

Output 24V-100mA

UK-PS2

Input 230V-50Hz 25mA

Output 24V-100mA

Introduction

The is designed to amplify the Fono mini A2D

signal from a moving magnet cartridge to a

suitable level for all line level inputs of an audio

amplifier. The USB interface also offers the ability

to simply transfer vinyl to PC . The Fono mini A2D

amplifier offers exceptional performance and

convenience and will be a valuable addition to any

Hi-Fi set up.

Input Connections (1)

Connect the signal lead (tonearm leads) to the

input sockets labelled on the rear panel. If the

tonearm requires a separate earth please

connect the earth lead to the earth terminal

located on the front panel of the Fono mini A2D.

Output Connections (2)

Connect the output sockets of the Fono mini A2D

to a suitable ‘line level’ input on your amplifier

using appropriate RCA leads. (Do not connect to

an amplifiers integrated ‘Phono’ or ‘Disk’ input).

Power Connections (4)

Connect the designated power supply to the

power socket situated on the rear panel. Power

on is indicated by illumination of the red LED (3).

Set-up is now complete, simply switch on, sit back

and enjoy!

(4) (2) (3)

(1)

Produktspecifikationer

Varumärke:	Rega
Kategori:	mottagare
Modell:	Fono Mini A2D
Enhetsplacering:	Ingebouwd
Innehåll (inuti):	32 l
Typ av operation:	Knoppen
Magnetronkraft:	1000 W
Power grill:	1500 W
Färg på produkten:	Roestvrijstaal
Vikt:	38000 g
Nettoskatt:	3400 W
Grill:	Ja
Integrerad klocka:	Ja
Avfrostningsfunktion:	Nee
Antal automatiska program:	3
Strömförsörjning:	230V AC, 50Hz
Automatisk tillagningsfunktion:	Ja
Innermått (B x D x H):	420 x 390 x 210 mm
Mått (B x D x H):	594 x 472 x 455 mm