REL Acoustics HT/1003 MKII Bruksanvisning
REL Acoustics
Subwoofer
HT/1003 MKII
Läs gratis den bruksanvisning för REL Acoustics HT/1003 MKII (20 sidor) i kategorin Subwoofer. Guiden har ansetts hjälpsam av 21 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 11 recensioner. Har du en fråga om REL Acoustics HT/1003 MKII eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/20
/
REL
ACOUSTICS
LTD.
REL SerieHTMKII Quick Start Guide
For full manual, please visit rel.net/SerieHTMKJI
Remove subwoofcr from packaging by removing upper foam and carefully turning it over.
Doing so will place it right side up so that the subwoofer
is
sitting on its rails.
Place in desired position. While your REL has been designed to be extremely easy to position and achieve
excellent results, careful placement along the same wall as the screen will yield improvements. Listen for
increases
in
deep bass output as well as precision
of
bass notes when setting up.
Theater connection
Connect RCA cable from Sub
Out
of
theater processor to LFE input
of
the HTMkll. Use the lower left
input.
.1
/LFE
Input
~
Phono
Interconnect
Start CROSSOVER control
at
30Hz (minimum).
Adjust LEVEL control to 1/4
of
the rotation
up
from minimum setting.
Plug in AC cord.
Power on with switch next to AC input.
Set toggle below STATUS light to ON.
Set CROSSOVER control to eliminate upper bass boom.
Preamp
Output
or
Sub/LFE
Output
Fine tune LEVEL control using a known powerful . I chapter to make sure your setting is not too high
or
damage can occur.
Powered Speaker connection
Connect RCA from output to right input for mono
or
both left and right for stereo.
Low
Level
Input
Right~
Left~
Phono
Interconnects
Adjust LEVEL control to I
/4
of
the rotation
up
from minimum setting.
Start CROSSOVER control
at
30Hz (minimum).
Plug in
AC
cord.
Power on with switch next to AC input.
Set toggle below STATUS light to ON.
Fine tune CROSSOVER control to eliminate upper bass boom.
Fine tune LEVEL control to blend with powered speakers.
Note that CROSSOVER and LEVEL become inverse.
To
low-level
output
of
the
amplifier/processor
DO
NOT
TURN
CROSSOVER UP PAST
12
O'CLOCK. Doing
so
is unnecessary and may result
in
damage to the driver.
Place carefully: While your REL has been designed to be extremely easy to position and achieve excellent
results, careful placement along the same wall as the screen will yield improvements. Listen for increases
in deep bass output as well
as
precision
of
bass notes when setting up.
Produktspecifikationer
| Varumärke: | REL Acoustics |
| Kategori: | Subwoofer |
| Modell: | HT/1003 MKII |
Behöver du hjälp?
Om du behöver hjälp med REL Acoustics HT/1003 MKII ställ en fråga nedan och andra användare kommer att svara dig
Subwoofer REL Acoustics Manualer
5 Januari 2025
23 September 2024
21 September 2024
21 September 2024
21 September 2024
21 September 2024
20 September 2024
20 September 2024
20 September 2024
20 September 2024
Subwoofer Manualer
- Power Acoustik
- QTX
- Atlas Sound
- Raveland
- Wet Sounds
- Krüger And Matz
- Yamaha
- Jensen
- BMB
- AudioControl
- Energy
- LTC
- Cerwin-Vega
- Mission
- Match
Nyaste Subwoofer Manualer
21 Oktober 2025
18 Oktober 2025
18 Oktober 2025
15 Oktober 2025
15 Oktober 2025
15 Oktober 2025
13 Oktober 2025
13 Oktober 2025
13 Oktober 2025
13 Oktober 2025