Relacart PM-320 Bruksanvisning

Läs gratis den bruksanvisning för Relacart PM-320 (2 sidor) i kategorin mikrofon. Guiden har ansetts hjälpsam av 32 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 3 recensioner. Har du en fråga om Relacart PM-320 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

2

2

2

2

Power switchwith indicator light

Functionoperation knob: turn thisknob left and right to select the menu,

press the knob to set the system operation menu.

Headphone monitor jack, stereo output.

“ ” Volume operation button: increase the input volume gain.

“ ” Volume operation button: attenuate the input volume gain.

OLED display: display frequency, frequencygroup and channel, batterylife,

etc.

Infrared data transmission (iR) window: Infrared pairing window, receiving

the data signal transmitted by the receiver.

Infrared data transmission data (SYNC) button: Pressthis button to transmit

the channel and setting data of the transmitter to the receiver.

() .

Antennas A and B.

Power switch/volume potentiometer.

3.5mm stereo headphone monitor jack.

Antenna A indicator: When the batterylevel shows 1 bar, the antenna indicator

changes from blue to red.

Antenna B indicator: When the batterylevel shows 1 ba, the antenna indicator

changes from blue to red.

OLED display: display frequency, frequency group channel, battery life, etc.

Anti-pull device, used for power cord.

The 12V connectionjack (DC IN) of the external power adapter.

A: 6.3 mm jack, the left side is the audio output (LOOP OUT BAL 1/L) .

B: 6.3 mm jack, the right side is the audio output (LOOPOUT BAL 2/R) .

A: XLR-3/6.3mm combo jack, on the left is the audio input (BAL AF IN1/L) .

B: XLR-3/6.3mm combo jack, on the right is the audio input (BAL AF IN2/R) .

BNC interface, antenna output interface.

Note: In mono mode, the signal from the left audio input terminal (XLR-3/6.3

mm combojack, BAL AF IN1/L) will be sent.

Volume input: Display the set volume inputparameters.

Radio frequency display: The device is transmitting radio signals.

Transmit power: set transmit power. ( “ ” High transmit power, “ ”

low transmit power)

Audio mode: When mono is selected, it is displayed as “ ” , Pilot function

is automatically turned off.

When stereo is selected, itis displayed as “ ” , Pilot function

is automatically turned on.

Controlsound “P” : Control sound analysishas been enabled. When stereo is

selected, the pilot analysis sound isturned on automatically, and when mono

is selected, the pilot analysis sound is turned off automatically.

“Display Mode” status display: A. Frequency: the set transmitting frequency.

B. Group, channel: setgroup andchannel.

C. Name: set name freely.

Key lock: The key lock is enabled on the transmitter.

Audio frequency: left (AF L) and right (AF R) audio channels, indicatingthe

level of audio input.

1

1

1

1

3

3

3

3

4

4

5

5

4

4

6

6

7

7

8

5

6

Receiver 1 *

Transmitter 1 *

BNC antenna1 *

External power adapter1 *

15VAA battery2. *

Stereo line2*

1U Rack mount kitincluding screws1 set ( ) *

Simple operation manual1 *

PM-320:Front panel:Rear panel:

1 2 3 4 5 6

System Overview

PM-320 is a wireless monitoring system for stage performances and

audio broadcasting, and a wireless listening system for large simultaneous

interpretation conferences. High-fidelity sound, advanced electronic

processing technology instead of the traditional complicated and heavy

monitoring equipment, eliminate the howling from the monitoring equipment,

and make the performance reliable and perfect.

System performance characteristics

· / Metal 12 EIA standard 1U case.

· The housing of PM-320R receiver is made of light-weight and tough alloy

materials.

· Exquisite and simple OLED display.

· The receiver uses the UHF frequency band, and the CPUcontrols diversity

reception to reduce dead spots and ensure stable reception.

· The bandwidth is 32MHz and there are 1280 adjustable frequencies. 1-10

Channel groups, more than 180 fixed frequencies for choose. Channel

groups U1-U5 can set and save frequencies freely.

· Stereo and mono selection.

· Treble boost function, limitcontrol function.

· The stable PLL phase-locked oscillation circuit, combined with the “noise

lock” squelch can effectively block stray RF.

· With headphone monitoring output.

· With long transmission distance, it issuitable for various occasions.

7 4

862 13521345

Gr:02 Ch:01

AF

INPUT:-15dB

L AFR

1235

8

7

6

4

8

L

5

7

8

1

2 3

45

6

10

8

9

7

11

12

IR

PM-320 WirelessInearMonitor System -

UHF Wireless Microphone

Packing listTransmitterfunction introductionTransmitterdisplay overviewReceiverFunction Introduction System Introduction

transmits the channel data of the receiver to the transmitter, so that the

frequency of the transmitter and the receiver are consistent.

SET key: enter the menu/or confirm the menu settings.

“ / ” : select function operation keys.

Belt clip: fix the receiver around the waist of the user.

Battery compartment: fill 2 AA batteries. (It is best to use alkaline 1.5V AA

batteries. Please replace two batteries at the same time when replacing

new batteries. )

Warning: Do not install the battery with wrong polarity, which may damage

the internal electronic parts.

Battery cover lock switch: Push this switch to open the battery cover.

Infrared data transmission window (iR) : Infrared frequency window, which

10

11

12

8

9

7

Produktspecifikationer