RIDGID 00-R Bruksanvisning
                    RIDGID
                    
                    Inte kategoriserad
                    
                    00-R
                
                                
    Läs gratis den bruksanvisning för RIDGID 00-R (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 6.5 recensioner. Har du en fråga om RIDGID 00-R eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
                        Sida 1/4
                    
                    
                    
moving the handle down in order to start the threader
(Figure 3).
Make sure the handle is clean and free from
oil and grease. This allows for better control of the tool.
Figure 3 – Sliding Threader On Pipe
5. Before  applying  force  to  the  handle,  ensure  that  the
ratchet pawl is engaged. 
Pawl may fail to engage if pushed against
the  side  of  the  die  head.  Specific  care  should  be  taken
when threading pipe that is vertical.
6. When hand threading, your weight should be above the
handle ensuring maximum leverage. If possible, do not
do all the work with your arms, use your weight. Do not
overreach.  Keep proper footing and balance  to  main-
tain better control.
Do  not  slide  a  pipe  or  “cheater”  over  the
handle  to  gain  extra leverage.  This  practice  can  result  in
serious injury.
7. Apply a generous quantity of RIDGID Thread Cutting Oil
when threading  . Use of a lubricating oil or a(Figure 4)
poor thread cutting oil can result in a poor quality cut
thread, leaky joints, short die life and high handle forces.
Figure 4 – Applying Thread Cutter Oil
8. Stop threading when the end of the dies are flush with
the end of the pipe. At this point, the correct size has
been reached to produce the proper joint. To continue
Ridge Tool Co., Elyria, Ohio, U.S.A.
8/03
Manual Pipe Threader Instructions
Printed in U.S.A. 999-997-601.10
RIDGID 00-R, 12-R and 11-R Threaders are designed to
thread pipe or conduit using individual die heads for each
size of pipe and a manually operated ratchet.
Warning!  Read  these  instructions  carefully  before
using  this tool.  Failure to follow  all  instructions  may
result in property damage and/or serious injury.
1. Inspect the threader before use. Replace dies or  any
other  part that  shows damage  or  wear.  To  ensure  a
high quality thread, only use RIDGID replacement dies. 
Worn dies can result in poor thread quality
and high handle forces.
2. Mount the  pipe  firmly  in  a  pipe vise.  When threading
an  existing  pipe,  make sure  it  is  secure  and will  not
move.  Cut  the  end  of  the  pipe  cleanly  and squarely
using a pipe cutter (Figure 1).
When working on a scaffold or lift, the oper-
ator  should  be  properly  secured  to  prevent  injury  in  the
event of a fall.
Figure 1 – Cutting End of Pipe
3. Ream  the  end  of the  pipe  to  remove  any  burrs  that
may have been produced during the cutting of the pipe
(Figure 2).
Figure 2 – Reaming End of Pipe
4. Select  the  correct  die  head  for  the  size  and  type  of
pipe to be threaded and the thread form you require.
Insert die head into the ratchet. Slip the pipe guide at
the rear of the threader over the pipe and gently apply
pressure to the front of the die head at the same time
WARNING
WARNING
WARNING
WARNING
WARNING
Produktspecifikationer
| Varumärke: | RIDGID | 
| Kategori: | Inte kategoriserad | 
| Modell: | 00-R | 
| Enhetsplacering: | Vrijstaand | 
| Färg på produkten: | Wit | 
| Dörrgångjärn: | Rechts | 
| Inbyggd display: | Nee | 
| Vikt: | 50000 g | 
| Bredd: | 560 mm | 
| Djup: | 630 mm | 
| Höjd: | 1725 mm | 
| Ljudnivå: | 39 dB | 
| Energie-efficiëntieklasse: | E | 
| Årlig-energiförbrukning: | 195 kWu | 
| Förpackningens vikt: | 54000 g | 
| Förpackningens bredd: | 570 mm | 
| Djuppackning: | 640 mm | 
| Förpackningshöjd: | 1810 mm | 
| Frys nettokapacitet: | 58 l | 
| Fryskapacitet: | 3 kg/24u | 
| Dörröppningsriktning utbytbar: | Nee | 
| Kylskåpets nettokapacitet: | 194 l | 
| No Frost (kylskåp): | Ja | 
| Kylskåp invändig belysning: | Ja | 
| Typ av lampa: | LED | 
| Antal hyllor i kylskåp: | 4 | 
| Antal-grönsakslådor: | 1 | 
| Frysläge: | Boven | 
| Retentionstid vid strömavbrott: | 12 uur | 
| Antal fryshyllor: | 1 | 
| Total nettokapacitet: | 252 l | 
| Äggställ: | Ja | 
| Automatisk avfrostning (kylskåp): | Ja | 
| Hyllmaterial: | Gehard glas | 
| Kylskåpsdörrfickor: | 4 | 
| Energianvändning per dag: | 0.534 kWh/24u | 
| Nuvarande: | 1 A | 
| Antal avtagbara plattor: | 3 | 
| Klimaatklasse: | N-ST | 
| Automatisk avfrostning (frys): | Nee | 
| Bulleremissionsklass: | C | 
| Justerbara fötter: | Ja | 
| AC-ingångsspänning: | 220-230 V | 
| AC-ingångsfrekvens: | 50 Hz | 
| Energieffektivitetsskala: | A tot G | 
Behöver du hjälp?
Om du behöver hjälp med RIDGID 00-R ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad RIDGID Manualer
                        
                         8 Januari 2025
                        
                    
                                                            
                        
                         8 Januari 2025
                        
                    
                                                            
                        
                         8 Januari 2025
                        
                    
                                                            
                        
                         25 September 2024
                        
                    
                                                            
                        
                         20 September 2024
                        
                    
                                                            
                        
                         20 September 2024
                        
                    
                                                            
                        
                         20 September 2024
                        
                    
                                                            
                        
                         19 September 2024
                        
                    
                                                            
                        
                         19 September 2024
                        
                    
                                                            
                        
                         19 September 2024
                        
                    
                                                            Inte kategoriserad Manualer
- Summit
 - Tempmate
 - OLLO
 - New Pol
 - BioChef
 - Leifheit
 - Rossi
 - Kitchen Brains
 - Xaphoon
 - Exelpet
 - Teenage Engineering
 - Xplora
 - Generation
 - Twinkly
 - Optoma
 
Nyaste Inte kategoriserad Manualer
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025
                        
                    
                                                            
                        
                         9 April 2025