RIDGID 46 Bruksanvisning
Läs gratis den bruksanvisning för RIDGID 46 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 3.5 stjärnor baserat på 6 recensioner. Har du en fråga om RIDGID 46 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/4
Pipe Stand User Guide
WARNING
Read the warnings
and instructions for all
equipment being used
before operating this
tool to reduce the risk
of serious personal injury.
SAVE THESE INSTRUCTIONS!
•Properly support pipe. Stay clear of supported loads.
Failure to properly support pipe can cause stand tipping,
falling pipe and serious injury.
•
Do not exceed stand ratings (marked on product).
Exceeding stand ratings can damage the stand and
inc
rease the risk of stand tipping, falling pipe and serious
injury.
•Inspect stand before each use to reduce the risk of
stand tipping, falling pipe and serious injury.
•
Keep hands clear of pinch points to reduce the risk
of pinching and crushing injuries.
•Use appropriate safety equipment. Always wear
proper eye and foot protection. Dust mask, face shield
hearing protection or other equipment may be needed to
reduce the risk of injury.
•
Do not raise elevator tube above hand screw.
This
could cause stand tipping, falling pipe, and serious injury.
Lock ring must securely engage elevator tube. Tighten
the hand screw securely against elevator tube.
If you have any question concerning this RIDGID
®
product:
– Contact your local RIDGID
®
distributor.
– Visit RIDGID.com to find your local RIDGID contact point.
– Contact Ridge Tool Technical Service Department at
ProToolsTechService@emerson.com, or in the U.S. and
Canada call 844-789-8665.
Description
RIDGID
®
Pipe Stands are used to support pipe for a variety
of uses. See the product label for specifications or consult
the RIDGID catalog.
Pipe Stand User Guide
Figure 1 – RIDGID Pipe Stands
Inspection And Maintenance
Clean the stand to aid inspection and improve control.
Inspect the stand before each use for proper assembly, wear,
damage, modification or other issues that could affect safe
use. Look for bent components or damaged welds. Install any
required parts, such as the hand screw. If any problems are
found, do not use until corrected.
Lubricate all moving parts/joints as needed with light lubricat-
ing oil. Wipe up excess oil.
Set Up/Operation
1. Make sure all equipment is inspected and set up per its
instructions.
2
.
Locate a clear, level, stable location for the stand, other
equipment and the operator.
3. For folding stands, make sure the legs are fully open
and the feet sit squarely on the level floor.
4. If equipped with rollers, make sure that the rollers are
properly adjusted for pipe size. Ball transfer heads can
be used with the VJ and VF stands. Make sure fasten
-
ers are secure.
46
965
AR-99
RJ-624
Hand
Screw
Base
92
Jack
Screw
Handle
Roller
Adjusting
Collar
Roller
Jack
Screw
Handle
Printed 07
/24
ECN003274
999-998-552.08
REV. C
©2012, 2024, Ridge Tool Company
RIDGID and the Emerson logo are registered trademarks of Emerson Electric Co. or its subsidiaries in the US and other countries.
Any other trademarks belong to their respective holders.
CJ-99
VF-99
RIDGID.com/qr/vhps
VJ-99
RJ-99
Hand Screw
Base
Head
Assembly
Elevator
Tube
Jack Screw
Handle
Lock
Ring
Produktspecifikationer
| Varumärke: | RIDGID |
| Kategori: | Inte kategoriserad |
| Modell: | 46 |
Behöver du hjälp?
Om du behöver hjälp med RIDGID 46 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad RIDGID Manualer
8 Januari 2025
8 Januari 2025
8 Januari 2025
25 September 2024
20 September 2024
20 September 2024
20 September 2024
19 September 2024
19 September 2024
19 September 2024
Inte kategoriserad Manualer
- Perfect Christmas
- Severin
- Beafon
- Stäubli
- Uni-T
- Urban Glide
- G3 Ferrari
- Fire Sense
- Maretron
- Linhof
- Mobotix
- Kerbl
- Yuede
- Kessler
- PUR
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025