RIDGID R4092 Bruksanvisning
Läs gratis den bruksanvisning för RIDGID R4092 (8 sidor) i kategorin Sågmaskin. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 6.5 recensioner. Har du en fråga om RIDGID R4092 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
English
WARNING:
To reduce the risk of injury, do not attempt to use
this product until you have read thoroughly and
understand completely this Operator's Manual and
the Operator’s Manual for your tile saw.
UNPACKING
This product has been shipped completely assembled.
n Carefully remove the product from the box. Make sure
that all items listed in the packing list are included.
WARNING:
Do not use this product if it is not completely
assembled or if any parts appear to be missing
or damaged. Use of a product that is not properly
and completely assembled could result in serious
personal injury.
n Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
n Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
n If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
WARNING:
If any parts are damaged or missing do not operate
this tool until the parts are replaced. Use of this
product with damaged or missing parts could result
in serious personal injury.
PACKING LIST
See Figure 1.
Stand, Height Adjustment Pin (4), and Operator’s Manual
SETTING UP THE STAND
See Figures 2 - 5.
nWith the unit in the upright position, spread the legs of
the stand. Place stand on level ground.
NOTE: When positioning the stand make sure each leg
is spread fully outward to ensure the stand’s stability.
nTo adjust the height of the stand, move each adjustable
foot up or down until the hole in the leg is aligned with
one of the holes in the foot. Secure the feet in place using
height adjustment pins with bales.
NOTE: Make sure the feet are positioned at the same
height to ensure stability.
nLine up channels under tile saw with braces on stand.
Position saw onto stand. Make sure that the tile saw is
flush against the stand and that all the stand legs are
touching the ground.
nMake sure the stand is stable and on level ground before
using the tile saw.
OPERATOR’S MANUAL
TILE SAW STAND
To register your RIDGID product,
please visit: http://register.RIDGID.com
SAVE THESE INSTRUCTIONS
990000487
7-9-18 (REV:02)
ONE WORLD TECHNOLOGIES, INC.
P.O. Box 1427, Anderson, SC 29622
1-866-539-1710 / www.ridgid.com
FOR USE ONLY WITH THE RIDGID R4040 TILE SAW
Produktspecifikationer
| Varumärke: | RIDGID |
| Kategori: | Sågmaskin |
| Modell: | R4092 |
Behöver du hjälp?
Om du behöver hjälp med RIDGID R4092 ställ en fråga nedan och andra användare kommer att svara dig
Sågmaskin RIDGID Manualer
20 September 2024
16 September 2024
9 September 2024
8 September 2024
7 September 2024
4 September 2024
1 September 2024
1 September 2024
31 Augusti 2024
29 Augusti 2024
Sågmaskin Manualer
- Elektra Beckum
- Makita
- Gardenline
- MyTool
- Bavaria By Einhell
- Gude Pro
- Kraftronic
- Shindaiwa
- Cocraft
- Graphite
- Max Bahr
- Triton
- Porter-Cable
- Toolson
- Tacklife
Nyaste Sågmaskin Manualer
3 April 2025
3 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
29 Mars 2025
29 Mars 2025