Roadstar TRA-2425PSW Bruksanvisning
Läs gratis den bruksanvisning för Roadstar TRA-2425PSW (19 sidor) i kategorin Radio. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 2.5 recensioner. Har du en fråga om Roadstar TRA-2425PSW eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/19
Instruction manual
Bedienungsanleitung
Manuel d’instructions
Manuale d’istruzioni
Manual de instrucciones
Manual de instruções
is a registered Trademark of Roadstar S.A. - Switzerland All rights reserved
MULTIBAND PORTABLE RADIO WITH
ALARM CLOCK
Roadstar Management SA
via Passeggiata 7, CH 6883
Novazzano (Switzerland)
TRA-2425PSW
English English
1 2
TRA-2415PSW
Portable AM/FM/SW Radio with Alarm CLock.
INSTRUCTION MANUAL
Please read this instruction manual carefully and familiarize yourself with your new Radio before
using it for the first time. Please retain this manual for future reference.
LOCATION OF CONTROLS
1. LCD Display
2. Tuning UP
3. Set Button
4. Volume Knob
5. MW/FM Band Button
6. SW Band Button
7. Snooze / Sleep Button
8. Headphone output
9. NOT USED
10. Preset Memory +
11. Power On/Off Button
12. Preset Memory M-
13. Alarm Button
14. Battery Compartment
15. Speaker
16. Skip – Button
17. Mode Button (Tuner/Clock/Alarm)
18. Tuning Knob
19. FM Antenna
20. Handle
21. Power Cord
CONNECTING TO POWER
The exclamation point within the triangle is a warning sign alerting the user
of important instructions accompanying the
product.
The lightening flash with arrowhead symbol within the triangle is a warning
sign alerting the user of “dangerous voltage” inside the unit.
To reduce the risk of electric shock, do not remove the cover. No user serv-
iceable parts inside the unit. Refer all servicing to
qualified personnel.
This unit operates on 230V ~ 50Hz. If the unit is not used for a long period of
time, remove the plug from the AC mains.
This unit must not be exposed to moisture or rain.
Ensure all connections are properly made before operating the unit.
This unit should be positioned so that it is properly ventilated.Avoid placing
it, for example, close to curtains, on the carpet or in a built-in installation
such as a bookcase.
Do not expose this unit to direct sunlight or heat radiating sources.
WARNINGS
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates that it should
not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types ofwastes
and recycle it responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they purchased
this product, or their local government office, for details of where and how
they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
Before switching on make sure that the voltage of your electricity supply is the same as that
indicated on the rating plate.
For your own safety read the following instructions carefully before attempting to connect this
unit to the mains.
English English
3 4
MAINS (AC) OPERATION
This unit is designed to operate on AC 230V 50Hz current only. Connecting it to other power
sources may damage the unit.
Caution
To prevent electric shock disconnect from the mains before removing cover. No user serviceable
parts inside. Refer servicing to qualified service personnel.
Safety Precaution
Do not allow this unit to be exposed to rain or moisture.
Mains Supply: AC230Volts / 50Hz - AC only
This symbol means that this unit is double insulated.An earth connection is not required.
POWER SUPPLY
• Remove the Radio carefully from the box, retaining the packaging for future use.
• Please read this instruction book carefully before operating this unit.
AC Power Operation
• Connect the AC Power Cord to your AC household mains outlet and switch on the mains
supply. Make sure the voltage is compatible.
Battery Operation
• Remove mains lead from the unit for battery operation.
• Open the Battery Compartment at the back of the radio and insert four UM3 batteries
following the polarity diagram shown inside the battery compartment.
• Batteries should be removed form the compartment if the unit is not to be used for some
time.
• Flat batteries should be removed from the unit to avoid leakage
RADIO OPERATION
Antenna
ForFM reception there is a built-in telescopic FM antenna (19) at the rear of the unit. Extend the
antenna and move it around to obtain the best reception.
For MW / SW reception the signals are picked up through a built-in ferrite antenna. Your may
have to orient the unit to obtain the best reception.
•Press the Power ON/OFF Button (11) to power ON the unit.
•Choose the radio wave band (MW, FM or SW) using the BAND Button (5 or 6)
•Search for the station of your choice using the Tuning knob (18).
•To switch off the radio, press the Power button (11) to OFF.
Store Radio Stations manually
This unit can store 24 stations (8 FM, 8 MW and 8 SW).
•Tune the desired station as explained above
•Press the SET button (3) to enter in preset mode
•The icon “CH” flash and appear in the display
•Press the M+ or M - buttons to choose the preset number, from 1 to 8.
•Press the SET button (3) to confirm the memory setting.
Store Radio Stations automatically
Keep pressed the SET button (3) 3 seconds and the Radio will be stored in the memory
sequencially.
CLOCK AND ALARM OPERATION
SETTING THE CLOCK
Make sure the POWER switch is set to the 'Off' position. The time or alarm time cannot be set
or adjusted while the unit is 'On'.
•Press the SET button (3) and the display will show the minute 00 will flash and press Tune
+/- to select the minute.
•Press the SET button (3) again to confirm setting, then the Display will show 00:00 and the
first 00 will flash, then press Tune +/- to select the correct hours.
•Press the SET button (3) again to confirm setting, then the Display will show 24H will flash,
then press Tune +/- to select the 12H or 24H.
•Press the SET button (3) to confirm the clock setting,
CALENDAR SETTING
When the display show the time, press the MODE button (17) once, it show calendar mode.
•Press SET button once (3) to select the year
•Turn the Tune + / - knob to set the correct year
•Press SET button (3) again to select the month
•Turn the Tune + / - knob to set the correct month
Produktspecifikationer
| Varumärke: | Roadstar |
| Kategori: | Radio |
| Modell: | TRA-2425PSW |
Behöver du hjälp?
Om du behöver hjälp med Roadstar TRA-2425PSW ställ en fråga nedan och andra användare kommer att svara dig
Radio Roadstar Manualer
8 Januari 2025
30 September 2024
18 September 2024
6 September 2024
31 Augusti 2024
28 Augusti 2024
28 Augusti 2024
27 Augusti 2024
26 Augusti 2024
25 Augusti 2024
Radio Manualer
Nyaste Radio Manualer
16 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
12 Juni 2025