Rode M1 Bruksanvisning

Läs gratis den bruksanvisning för Rode M1 (4 sidor) i kategorin hi-fi system. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 2 recensioner. Har du en fråga om Rode M1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
(EMC, LVD )
M1
Instruction Manual
www.rodemic.com
- 2 -
Specifi cations
Acoustic Principle: Dynamic
Polar Pattern: Cardioid (see graph below)
Frequency Range: 75Hz ~ 18,000Hz (see graph below)
Output Impedence: 320Ω
Sensitivity: -56dB ± 2 dB re 1V/Pa
(1.6mV @ 94 dB SPL) @ 1 kHz
Output Connection: 3-pin XLR balanced output between
pin 2(+), pin 3(-) and pin 1 (ground)
Net Weight: 360g (0.79lb)
Packed Weight: 700g (1.54lb)
Dimensions: Length: 171mm (6.73”)
Width: 51.5mm (2.03”)
RM1
stand mount
ZP1
zip pouch
Polar ResponseFrequency Response
Accessories
- 3 -
Using the M1
The M1s primary function is a live vocal
microphone. When setting it up on stage,
make sure the foldback monitors are
positioned as pictured. This will direct the
sound to the vocalist and towards the least
responsive section of the M1s pick up
pattern.
To ensure the lowest noise/distortion your mixer input gain
control should be set so that the Peak Program indicator (PPI) LED
ashes ON during peaks of the source (voice/instrument).
If there is no PPI, adjust the input gain while listening for
distortion of the sound. If distortion is heard, gradually reduce
the gain until it is no longer present.
Microphone technique, or how to get the sound you want,
requires experimentation.
We suggest that you start with the channel EQ set to ‘OFFor
‘FLAT’ (no boost or cut).
To avoid feedback and make full use of the M1s
pick up pattern, it is best not to cup your
hands over the head of the microphone.

Produktspecifikationer

Varumärke: Rode
Kategori: hi-fi system
Modell: M1

Behöver du hjälp?

Om du behöver hjälp med Rode M1 ställ en fråga nedan och andra användare kommer att svara dig