Rotel RFK-20 Bruksanvisning

Läs nedan 📖 manual på svenska för Rotel RFK-20 (4 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
INSTRUCTIONS
RFK-20 (20” RACK FRAME KIT)
RFK-26 (26” RACK FRAME KIT)
20" Rack Frame Kit List 26" Rack Frame Kit List
Rack Frame (A) 20inch 5 set (10 rails) Rack Frame (B) 26inch 5 set (10 rails)
Fixing Angle 5 set (10 pcs) Fixing Angle 5 set (10 pcs)
Screw (4x6mm) 5 set (20 pcs) Screw (4x6mm) 5 set (20 pcs)
1U COVER 10 pcs 1U COVER 10 pcs
2U-L COVER 5 pcs 2U-L COVER 5 pcs
2U-R COVER 5 pcs 2U-R COVER 5 pcs
3U-L COVER 5 pcs 3U-L COVER 5 pcs
3U-R COVER 5 pcs 3U-R COVER 5 pcs
4U-L COVER 1 pc 4U-L COVER 1 pc
4U-R COVER 1 pc 4U-R COVER 1 pc
Instruction sheet 1 Instruction sheet 1
* Frame fixing screws are not included in the kit * Frame fixing screws are not included in the kit
This Rack Frame Kit is for ROTEL 15 Series components only.
Please see back page
STEP 1: (Drawing 1)
Attach the rack rails to the left and right sides using a screw with 10-32 thread. (Not
included in the kit)
STEP 2: (Drawing 2)
Remove the feet from ROTEL component. Slide the ROTEL component slowly in to
the rack until the lower edge of front panel touches the bottom of the rail. Do not try
and push the product beyond this point.
STEP 3: (Drawing 3)
Attach the “L” bracket to stop the component sliding back using the affixed screw (4
x6mm), then screw it to Rack Frame by using (4 x 6mm) screw.
STEP 4: (Drawing 4)
Finish off by fixing the correct cover plate using screw with 10-32 thread. (Not included
in the kit)
082 OMFRK20_26 MANUAL 081113
13
42
(1)
(2)

Produktspecifikationer

Varumärke: Rotel
Kategori: Inte kategoriserad
Modell: RFK-20

Behöver du hjälp?

Om du behöver hjälp med Rotel RFK-20 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Rotel Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer