Russell Hobbs 14991-56 Bruksanvisning
Russell Hobbs
Järn
14991-56
Läs gratis den bruksanvisning för Russell Hobbs 14991-56 (92 sidor) i kategorin Järn. Guiden har ansetts hjälpsam av 10 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 5.5 recensioner. Har du en fråga om Russell Hobbs 14991-56 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/92
instructions 2
Bedienungsanleitung 6
mode d’emploi 10
instructies 14
istruzioni per l’uso 18
instrucciones 22
instruções 26
brugsanvisning 30
bruksanvisning 34
instruksjoner 38
käyttöohjeet 42
инструкции (Русский) 46
pokyny (Čeština) 50
pokyny (Slovenčina) 54
instrukcja 58
upute 62
navodila 66
οδηγίες 70
utasítások 74
talimatlar 78
instrucţiuni 82
инструкции (Български) 86
2
Read the instructions, keep them safe, pass them on if you pass the appliance on.
Remove all packaging before use.
A IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
1 This appliance must only be used by or under the supervision of a responsible adult. Use and
store the appliance out of reach of children.
2 Don’t put the appliance in liquid, don’t use it in a bathroom, near water, or outdoors.
3 Route the cable so it doesn’t overhang, and can’t be tripped over or caught.
4 Don’t iron clothing while it’s being worn – you’ll injure the wearer.
5 Don’t touch the soleplate, and keep away from the steam it emits.
6 Don’t use the iron in the vicinity of children.
7 Use the iron, or set it on its heel, on a stable, level, heat-resistant surface, preferably an
ironing board.
8 Don’t leave the iron unattended while plugged in, or while it’s standing on the ironing board.
9 Unplug the iron before filling, before cleaning, and after use.
10 Sit the iron upright when you’re not ironing.
11 Don’t fill the iron directly from the tap, use the jug.
12 Don’t use accessories or attachments other than those we supply.
13 Don’t use the appliance for any purpose other than those described in these instructions.
14 Don’t scratch the soleplate – avoid buttons, zips, etc.
15 The appliance has a protective thermal fuse, which will blow if it overheats. If this happens,
the appliance will stop working, and must be returned for repair.
16 Don’t operate the appliance if it’s dropped or damaged, or if it malfunctions or leaks.
17 If the cable is damaged, it must be replaced by the manufacturer, its service agent, or
someone similarly qualified, in order to avoid hazard.
household use only
U BEFORE USING FOR THE FIRST TIME
1 Remove any labels, stickers or packaging from the iron and soleplate.
2 Don’t worry if the iron smokes a bit at first, it’ll stop as the element cures.
3
3 Iron an old piece of cotton fabric, to clean the soleplate.
4 Press the S and * buttons 3 or 4 times, to check them.
C PREPARATION
5 Check for textile care symbols (i j k l).
6 Iron fabrics needing low temperatures j first, then those that need medium temperatures
k, and finish with those needing high temperatures l.
X FILLING
, Do your dry ironing first, then switch off, fill the reservoir, and do your steam ironing.
7 The iron may be used with tap-water, but if you live in a hard-water area, you should use
distilled water (not chemically descaled water).
8 If you buy distilled water, check that it is marketed as suitable for irons.
9 Don’t add anything to the water – you’ll damage the iron.
10 Unplug the appliance.
11 Open the water inlet cover.
12 Tilt the iron till the water inlet cover is vertical.
13 Pour water from the jug into the water inlet.
14 Pour slowly, to allow the air in the reservoir to escape, and avoid an airlock.
15 Don’t fill past the max mark on the reservoir, or water will escape in use.
16 Close the water inlet cover.
17 Wipe up any spillage.
C SWITCH ON
18 Sit the iron on its heel.
19 Put the plug into the power socket.
20 Turn the temperature control to bring the setting you want (see the guide below) next to the
notch.
21 The light will glow.
22 When the iron reaches the set temperature, the light will go off.
23 It will then cycle on and off as the thermostat operates to maintain the temperature.
temperature setting guide
label marking temperature setting
j cool – nylon, acrylics, polyester •
k warm – wool, polyester mixtures ••
l hot – cotton, linen •••/max
i do not iron
, If the instructions on the fabric label differ from this guide, follow the instructions on the
label.
C REDUCING TEMPERATURE
24 Reducing temperature takes longer, as the appliance has to lose heat.
25 Organise your ironing so you don’t need to reduce the temperature (“preparation” point 6).
n DRY IRONING
26 Do your dry ironing first, then switch off, fill the reservoir, and do your steam ironing.
27 Wait till the light goes off, then start ironing.
instructions
diagrams
1 light
2 temperature control
3 steam available
4 notch
5 water inlet
6 water inlet cover
7 spray nozzle
8 soleplate
9 steam vents
10 reservoir
11 heel
Produktspecifikationer
| Varumärke: | Russell Hobbs |
| Kategori: | Järn |
| Modell: | 14991-56 |
Behöver du hjälp?
Om du behöver hjälp med Russell Hobbs 14991-56 ställ en fråga nedan och andra användare kommer att svara dig
Järn Russell Hobbs Manualer
27 December 2024
26 December 2024
26 December 2024
27 September 2024
21 September 2024
20 September 2024
13 September 2024
10 September 2024
8 September 2024
8 September 2024
Järn Manualer
- Maestro
- Khind
- Girmi
- Primo
- MPM
- Clatronic
- Foppapedretti
- Swann
- Cecotec
- Emerio
- Thomas
- Ambiano
- Hotpoint
- Brentwood
- Hoover
Nyaste Järn Manualer
5 April 2025
1 April 2025
1 April 2025
31 Mars 2025
31 Mars 2025
12 Mars 2025
5 Mars 2025
5 Mars 2025
5 Mars 2025
5 Mars 2025