Ryobi RPP3600 Bruksanvisning

Ryobi Sågmaskin RPP3600

Läs nedan 📖 manual på svenska för Ryobi RPP3600 (22 sidor) i kategorin Sågmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/22

ORIGINAL INSTRUCTIONS

36V Cordless Pole

Pruner

RPP3626

RPP3600

Important!

It is essential that you read the instructions in this manual before operating

this machine.

Subject to technical modifications.

Safety

GENERAL POWER TOOL SAFETY WARNINGS

WARNING

Read all safety warnings and all instructions. Failure

to follow the warnings and instructions may result in

electric shock, re and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless)

power tool.

WORK AREA SAFETY

■Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

■Do not operate power tools in explosive

atmospheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

■Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose

control.

ELECTRICAL SAFETY

■Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk

of electric shock.

■Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

■Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

■Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase

the risk of electric shock.

■When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of electric

shock.

■If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

PERSONAL SAFETY

■Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under the

influence of drugs, alcohol or medication. A moment

of inattention while operating power tools may result in

serious personal injury.

■Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce

personal injuries.

■Prevent unintentional starting. Ensure the switch

is in the off-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your finger on the

switch or energising power tools that have the switch

on invites accidents.

■Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to

a rotating part of the power tool may result in personal

injury.

■Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power

tool in unexpected situations.

■Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

■If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection

can reduce dust-related hazards.

POWER TOOL USE AND CARE

■Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

■Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

■Disconnect the plug from the power source and/or

the battery pack from the power tool before making

any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

■Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

■Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

Produktspecifikationer

Varumärke:	Ryobi
Kategori:	Sågmaskin
Modell:	RPP3600
Färg på produkten:	Aqua-kleur
Sladdlängd:	29 m
Hållbarhetscertifikat:	RoHS
Antal per paket:	1 stuk(s)
Innehåller inte:	Halogeen
Förvaringstemperatur:	-40 - 65 °C
Typ av kabel:	OFNP
Full duplex:	Ja
Drifttemperatur (TT):	0 - 50 °C
Anslutning 1:	12x LC
Anslutning 2:	MPO
Anslutning 1 typ:	Mannelijk
Anslutning 2 typ:	Vrouwelijk
Struktur för trådläge:	Multimode
Kern diameter:	50 µm
Klädselns diameter:	125 µm
Fiberoptisk typ:	OM3
Antal optiska fibrer:	12