Samsung UN32J5003EF Bruksanvisning

Samsung Tv UN32J5003EF

Läs gratis den bruksanvisning för Samsung UN32J5003EF (4 sidor) i kategorin Tv. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 3 recensioner. Har du en fråga om Samsung UN32J5003EF eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/4

Auto Program

The function memorizes all channels that are available Auto Program

over the air or through your cable system and adds them to the

Channel List. If you are using a cable or satellite box, you do not

need to run the function.Auto Program

To start , follow these steps:Auto Program

1. Push MENU

→Channel →Auto Program →ENTER

your remote. The Antenna Source screen appears.

2. On the Antenna Source screen, select the source of your TV signal.

Air

If your TV is connected to an antenna choose , and then press Air

ENTER

. The TV will automatically start memorizing channels.

Cable

If your TV is connected to a cable outlet, choose , and then Cable

press ENTER

. Go to Step 3.

Auto

If you choose , and then press Auto ENTER

, the TV will

automatically select the correct Antenna source. Go to Step 3.

3. On the Cable Type screen, use the ◄/►/▲/▼ buttons to select

the type of digital and analog cable systems you have: , , STD HRC

or Most systems are (Standard). When done, select IRC. STD

Start, and then press ENTER

. The TV will start memorizing

channels.

✎Channel memorization can take up to 45 minutes, depending

on your cable system.

✎

Memorized channels are added to the Added Channels

list. These are the channels you will see when you use the

Channel buttons on your remote.

Clear Scrambled Channel

This function ﬁlters out scrambled channels after is Auto Program

completed. This process may take up to 20~30 minutes.

✎Press the ENTER

button to stop the Clear Scrambled

Channel.

✎This function is only available in mode. Cable

Managing Channels

Channel List

See your list of Added channels, Favorite channels, or channels

you've scheduled for viewing. Add or delete Favorite channels, add

or delete channels from the Added Channels list, schedule channels

or programs for viewing. Watch a channel by selecting the channel in

the , or screen, All Channels, Added Channels Favorite Channels

pressing the / buttons, and then pressing the ▲ ▼ ENTER

button.

Added Channels

6 Air

6-1 ♥ TV #6

7-1 ♥ TV #7

8 Air

9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10

11-1 ♥ TV #11

Air Zoom Select ''T Tools ► Next Program

Channel List Screens icons are listed on the left side.

Select an icon using the / buttons to view each list.▲ ▼

■

All Channels: Shows all currently available channels including

those you deleted from the list.Added Channels

■

Added Channels Added Channels: Shows all . These are the

channels that appear when you press the CH button.

■*

Favorite Channels: Shows all favorite channels.

■

Programmed: Shows all channels and programs currently

scheduled using .Timer Viewing

✎Remote control buttons active on the Channel List screen.

Green (Zoom): Enlarges or shrinks a channel number.

xYellow (Select): Move the cursor to a channel. Press the Yellow

button to select the channel. A

mark appears. Repeat to select

additional channels. Then, open the Tools menu and apply a

function to the channels you selected.

( ): Displays the Tools menu. (The Tools Channel List Tools

menus may differ depending on the situation.)

✎If you use a cable box or satellite box, you cannot use the

Channel List Channel List or the functions.

Display Icons Used in the Channel List Screens

Icons Meaning

A selected channel.

A Favorite channel.

)

A reserved program.

(

A program currently being broadcast.

The Channel List Tools Menu

The Channel List Tools menu contains most of the functions you

can use on the

All Channels

Added Channels

, and

Favorite

Channels List

screens. To view, select a list screen, select a

channel, and then press the

TOOLS

button.

■

Add / Delete: Delete a channel from or add a channel to the

Added Channels list.

To delete channels from the list, follow these steps:Added Channels

1. Select one or more channels in the list using Added Channels

the buttons and the Yellow Select button on your remote.▲/▼

2. Press the button on your remote. The Tools menu TOOLS

appears.

3. Select in the Tools menu, and then press the Delete ENTER

button.

To add channels to the list, follow these steps:Added Channels

1. Select one or more channels in the list using the All Channels

▲/▼ buttons and the Yellow Select button on your remote.

2. Press the button on your remote. The Tools menu TOOLS

appears.

3. Select in the Tools menu, and then press the Add ENTER

button.

✎

All deleted channels will be shown on the All Channels list.

You add channels back to the list on the Added Channels

All Channels list.

✎A gray-colored channel indicates the channel has been

deleted from the Added Channels list.

✎The menu option only appears for deleted channels.Add

Picture Reset

■

Picture Reset (Reset Picture Mode/Cancel): Resets the

picture settings to their factory defaults.

Sound Menu

Mode

■

Standard: Selects the normal sound mode.

■

Music: Emphasizes music over voices.

■

Movie: Provides the best sound for movies.

■

Clear Voice: Emphasizes voices over other sounds.

Equalizer

Available in Standard sound mode only.

■

Balance L/R: Adjusts the balance between the right and left

speaker.

■

100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment):

Adjusts the loudness of speciﬁc bandwidth frequencies.

■

Reset: Resets the equalizer to its default settings.

Auto Volume

Automatically adjusts the volume level when you change video

sources or content so the level remains the same.

Speaker Select

If you are listening to the sound track of a broadcast or movie

through an external receiver, you may hear a sound echo caused

by the difference in decoding speed between the TV’s speakers

and the speakers attached to your audio receiver. If this occurs, set

the TV to .External Speaker

✎When you set Speaker Select External Speaker to , the

TV’s speakers are turned off. You will hear sound through the

external speakers only. When you set Speaker Select to TV

Speaker both the T V’s speakers and the external speakers

are on. You will hear sound through both.

✎When Speaker Select External Speaker is set to , the

VOLUME and MUTE buttons will not operate and the sound

settings will be limited.

✎If there is no video signal, both the TV’s speakers and the

external speakers will be mute.

Preferred Language

Digital channels only.

Digital-TV broadcasts can transmit many audio tracks

simultaneously (for example, simultaneous translations of a program

into foreign languages).

✎You can only select a language from among the ones being

broadcast.

Multi-Track Sound (MTS)

Analog channels only.

■

Mono: Select for channels that are broadcasting in mono or if

you are having difﬁculty receiving a stereo signal.

■

Stereo: Select for channels that are broadcasting in stereo.

■

SAP: Select to listen to the Separate Audio Program, which is

usually a foreign-language translation.

✎Depending on the program being broadcast, you can listen to

Mono SAP, Stereo or .

SPDIF Output

The SPDIF (Sony Philips Digital InterFace) outputs an

uncompressed digital audio signal when you connect the digital

audio jack on the back of the TV to a digital audio in jack on a

receiver or home theater.

■

Audio Format: You can select the Digital Audio output (SPDIF)

format. The available Digital Audio output (SPDIF) format may

differ depending on the input source.

■

Audio Delay: Lets you correct timing mismatches between the

audio track and the video when you are watching the TV and

listening to digital audio output from the TV through an external

device such as an AV receiver. When you select , a Audio Delay

slider appears. Use the left and right arrow buttons to adjust the

slider. Press ENTER

when done (0ms ~ 250ms).

Video Description

(digital channels only)

Add video description to the main audio to help the visually

impaired.

Dolby Digital Comp

Sets Dolby Digital compression mode.

HDMI Audio Format

You can select the HDMI Audio format. The available HDMI Audio

format may differ depending on the input source.

Sound Reset

■

Reset All: Resets all sound settings to the factory defaults.

Channel Menu

Memorizing Channels

When you ﬁrst set up your TV using , the TV Plug & Play

memorized the channels that were available over the air or through

your cable system and added them to the . The Channel List

Antenna Auto Program and functions described below let you

re-run the channel memorization function without having to re-run

the procedure.Plug & Play

Antenna (Air / Cable)

Before your television can memorize the available channels, you

must select your TV's signal source, (using an antenna) or Air

Cable Channel Antenna Air Cable. Select Menu > > > or . After

you have selected the signal source, go on to the Auto Program

function.

✎Selecting the signal source using the function also Antenna

determines the signal source the TV is tuned to. For example,

if you receive your T V signal over the air, and you select

Cable, you will see only snow. You must select Air to see a

picture.

■

Add to Favorite/Delete from Favorite: Lets you add channels

to and delete channels from your list.Favorite Channels

To add channels to the list, follow these steps:Favorite Channels

1. Select one or more channels in the list using the All Channels

▲/▼ buttons and the Yellow Select button on your remote.

2. Press the button on your remote. The Tools menu TOOLS

appears.

3. Select in the Tools menu, and then press the Add to Favorite

ENTER

button.

To delete channels from the list, follow these Favorite Channels

steps:

1. Select one or more channels in the list Favorite Channels

using the buttons and the Yellow Select button on your ▲/▼

remote.

2. Press the button on your remote. The Tools menu TOOLS

appears.

3. Select in the Tools menu, and then Delete from Favorite

press the ENTER

button.

■

Timer Viewing: You can schedule a channel to be displayed

automatically at a set time, even when you are watching another

channel. You must set the current time ﬁrst in the > Time Clock

function to use .Timer Viewing

To schedule a channel, follow these steps:

1. Select a channel in the list using the Added Channels ▲/▼

buttons and the Yellow Select button on your remote.

2. Press the button on your remote. The Tools menu TOOLS

appears.

3. Select in the Tools menu, and then press the Timer Viewing

ENTER

button. The Timer Viewing screen appears.

Antenna Channel Repeat

▲

DTV Air 6-1 Once

▼

Move

Adjust

Enter

Return

Timer Viewing

Date Start Time

01-01-2017 12 : 01 am

4. Use the buttons to move from entry ﬁeld to entry ﬁeld ◄/►

and the ▲/▼ buttons to change the entries. Where numbers

are displayed, you can also enter numbers directly using the

number keypad on your remote.

✎If you select or , the date you Ever yday Every Week

select in the Date field becomes the start date for your

scheduled viewing. For , the TV will turn on Everyday

every day, at the time you selected, starting from that

date. For , the TV will turn on every week, Every Week

on the same day of the week as the star t date you

selected, at the time you selected, from that day on. If

you select , the TV will turn on once, on the date Once

and time you selected.

5. Press the ENTER

button on your remote when done.

✎Only Added Channels can be scheduled.

✎Scheduled programs and channels are displayed in the

Programmed List.

✎When you select a digital channel, press the ► button to

view the digital program list. If you highlight a program in

the list, and then press the ENTER

( ) button, Schedule

you set Timer Viewing for that program directly.

■

Channel Name Edit: Analog channels only. Lets you assign a

name of up to ﬁve characters to an analog channel. For example,

Hist, Food, Golf, etc. This makes it easier to ﬁnd and select a

channel .

■

Select All: Select all the channels in the displayed channel list.

■

Deselect All: Deselect all the selected displayed channels.

✎You can only select when one or more Deselect All

channels are selected.

■

Auto Program Auto Program: See under Memorizing Channels.

Programmed List (on the Channel List Screen)

The list displays the channels and programs you Programmed

have scheduled for viewing using the function. You Timer Viewing

can view, modify, or delete a show you have scheduled using the

functions on the List screen Tools menu.Programmed

Programmed List Screen Tools Menu

■

Change Info: Change the scheduling information for a show or

channel you have scheduled.

To change the information, follow these steps:

1. Select the List icon on the left side of the Programmed

Channel List screen, and then press the ENTER

button.

2. On the List screen, select the show or channel Programmed

entry you want to change, and then press the button. TOOLS

The Tools Menu appears.

3. Select , and then press the Change Info ENTER

button.

The screen appears.Timer Viewing

4. Use the buttons to move from entry ﬁeld to entry ﬁeld ◄/►

and the ▲/▼ buttons to change the entries. Where numbers

are displayed, you can also enter numbers directly using the

number keypad on your remote.

5. Press the ENTER

button when done.

■

Cancel Schedules: Cancel a show or channel you have

scheduled.

To cancel a scheduled show or channel, follow these steps:

1. Select the List icon on the left side of the Programmed

Channel List screen, and then press the ENTER

button.

2. On the List screen, select the show or channel Programmed

entry you want to cancel, and then press the button. TOOLS

The Tools Menu appears.

3. Select , and then press the Cancel Schedules ENTER

button. The screen appears.Cancel Schedules

4. Select , and then press the OK ENTER

button.

■

Information: Display the information for a show or channel you

have scheduled. You can also change the schedule Information.

1. Select the List icon on the left side of the Programmed

Channel List screen, and then press the ENTER

button.

2. On the List screen, select the show or channel Programmed

entry you want information for, and then press the TOOLS

button. The Tools Menu appears.

3. Select , and then press the Information ENTER

button.

The screen appears.Timer Viewing Info

4. Select , and then press the Change Info ENTER

button

to change information, or select , and then press the Close

ENTER

button to close the Information screen.

■

Select All / Deselect All: You can select or deselect all channels

in the channel list.

Other Channel Menu Functions

Channel Mode (Added Channels/Favorite

Channels)

Lets you select the channel list displayed when you press the

< >CH (Channel) button on your remote. For example, if you

select Favorite Channels, you will only see Favorite channels when

you press the button.< >CH

Fine Tune

Analog channels only.

If the reception is clear, you do not have to ﬁne tune the channel,

as this is done automatically during the search and store

operation. If the signal is weak or distorted, ﬁne tune the channel

manually.

✎Select the channel, and then select Fine Tune.

✎Fine tuned channels that have been saved are marked with

an asterisk “*” on the right-hand side of the channel number

in the channel banner.

✎To reset fine-tuning, select the channel, select Fine Tune, and

then select on the Reset Fine Tune screen.

Setup Menu

Plug & Play

Lets you re-run the initial setup procedure. For Plug & Play

instructions, see your Quick Start Guide.

Language

Set the menu language.

✎Choose between English, and Español, Français.

Setting the Time

Time

✎The time you set will appear when you press the INFO

button.

■

Clock: Set the clock so you can use the various timer features

of the TV.

✎If you disconnect the power cord, you have to set the

clock again.

To set the clock, follow these steps:

1. Select > > .Setup Time Clock

2. Press ENTER

and select or , and then press Auto Manual

ENTER

again.

If you selected Auto:

The TV will automatically download the correct time from a

digital channel.

• Select , and then press the Time Zone ENTER

button.

Use the buttons to select your , and then ▲/▼ Time Zone

press ENTER

• Select DST (Daylight Savings Time), and then press

ENTER

. Select if you want to turn the DST On

adjustment on and off manually. Select to turn off the Off

DST adjustment. Press ENTER

when done.

✎The and functions are only available DST Time Zone

when the Clock Mode is set to .Auto

If you selected Manual:

The screen appears. Use the buttons to Clock Set ▲/▼

change the values in each ﬁeld or use the number buttons to

enter the values directly. Use the buttons to move from ◄/►

ﬁeld to ﬁeld. When done with all the ﬁelds, press ENTER

✎Available only when is set to .Clock Mode Manual

■

Sleep Timer

Automatically shuts off the TV after a preset period of time. (30,

60, 90, 120, 150 and 180 minutes).

✎To cancel the Sleep Timer, select Off.

Timer 1 / Timer 2 / Timer 3

Turns the TV on and off automatically at times and days you

select. You can set three different on/off timer settings.

✎You must set the clock first.

■

On Time / Off Time: Set the hour, minute, am/pm, and

Activate/Inactivate ﬁelds for the and . Use the On Time Off Time

◄/► ▲/▼ buttons to move from ﬁeld to ﬁeld. Use the buttons

to change the values in each ﬁeld. To activate the timer with

the setting you have chosen, set the Activate/Inactivate ﬁeld to

Activate.

■

Volume: Set the desired loudness.

■

Contents: To select what will be turned on when the timer

setting is activated. You can set the TV to turn on a speciﬁc

channel or play back contents such as photo or audio ﬁles.

Use the buttons to move to the Contents ﬁeld, and then ◄/►

press the ENTER

button. The Contents screen appears.

Use the buttons to move from ﬁeld to ﬁeld. Use the ◄/► ▲/▼

buttons to change the values in each ﬁeld.

- TV/USB TV USB: Select or . The USB device must be

connected to your TV before you can select USB.

- Antenna: Displays the current antenna source, or .Air Cable

- Channel: If you have selected TV, select the desired channel.

- Music/Photo: If you have selected USB, follow these steps to

select a folder containing MP3 (Music) or JPEG (Photo) ﬁles on

the USB device:

✎The maximum number of files the TV can display,

including sub folders, in one folder of a USB storage

device is 1000.

✎The media may not play smoothly if you use a USB device

rated lower than USB 2.0.

1. Use the buttons to move to the ﬁeld under ◄/► Music

or the ﬁeld under , and then press the Photo ENTER

button. The TV displays a single folder (the Root folder)

and the type or name of the device.

2. Press the ENTER

button. A list of folders on the device

appears.

✎If there are no folders on your device, press the

Yellow select button to select the Root folder, and

then press the button. The Timer screen RETURN

re-appears.

3. Use the buttons to highlight a folder that contains ▲/▼

music or photos, and then press the Yellow select button

to select the folder.

4. Press the button. The Timer screen re-appears.RETURN

■

Repeat Once Everyday Mon~Fri Mon~Sat: Select , , , ,

Sat~Sun Manual Manual or . If you select , you can select the

days you want to activate the timer by using the buttons ◄/►

to highlight the day, and then pressing the ENTER

button.

To unselect a day, highlight it, and then press the ENTER

button.

When you ﬁnished making all your selections on the Timer screen,

press either the ENTER

or button.RETURN

The On Screen Menus

Your TV has two kinds of menus, the Main menu and the various

Tools menus. The Main menu gives you access to most or all of

the menu options available on your TV. The Tools menus display

a selected number of frequently used menu options that change

depending on the screen you are viewing. A Tools menu symbol

( ) in the lower right side of the screen indicates that a Tools menu T

is available.

The Main menu has seven primary categories:

yPicture yInput

ySound yApplication

yChannel ySupport

ySetup

To view the Main menu, press the button on your remote. To MENU

view a Tools menu, press the button on your remote.TOOLS

✎The menu options that appear in the Main menu depend

on the Source you have selected. For example, if you have

selected the HDMI source, the Channel category will not

appear. To see the Channel category, you must first select TV

in the Source List.

The Menu options are presented below, arranged by Main menu

categories. A Tools button symbol

(

) next to an option

name indicates the option is also available in one of the Tools

menus.

Picture Menu

Mode

Select your preferred picture mode.

✎When your T V is connected to a PC, you can only select

Entertain and Standard

■

Dynamic: Brightens the screen. Suitable for a bright room.

■

Standard: Suitable for normal room brightness.

■

Movie: Darkens the screen, making it less glary. Suitable for

watching movies in a darkened room.

■

Entertain: Sharpens the picture. Suitable for games.

✎Only available when the is connected to a .TV PC

Backlight / Contrast / Brightness / Sharpness /

Color / Tint (G/R)

■

Backlight: Adjusts the brightness of the screen by adjusting the

brightness of the individual pixels.

■

Contrast: Increases or decreases the contrast between dark and

light areas of the picture.

■

Brightness: Adjusts the brightness of the screen. Not as

effective as Backlight.

■

Sharpness: Sharpens or dulls the edges of objects.

■

Color: Adjusts the color saturation. The higher the Color setting,

the more intense the color. Low settings remove color and the

picture becomes black, white, and gray.

■

Tint (G/R): Adjusts the amount of green and red in the picture.

As you increase the amount of green, the amount of red

decreases and vice versa.

✎When the TV is connected to a PC, you can only make

changes to Backlight, , , Contrast Brightness and

Sharpness.

Picture Options

✎When the TV is connected to a PC, you can only make

changes to the Color Tone HDMI Black Level, Size, and .

■

Color Tone (Cool / Standard / Warm) Cool: makes the picture

bluer (cooler). Warm makes the picture redder (warmer).

✎Warm is deactivated when the picture mode is set to

Dynamic.

■

Size: Set the size and aspect ratio of the picture on the screen.

Your cable box or satellite receiver may have its own set of

screen sizes as well. However, we highly recommend you use

the TVs 16:9 mode most of the time.

16:9: Sets the picture to the 16:9 wide screen format.

Zoom1: Provides moderate magniﬁcation of the picture. Sides,

top, and bottom are cut off.

Zoom2: Provides larger magniﬁcation of the picture. Sides, top,

and bottom are cut off.

Wide Fit: Enlarges the aspect ratio of the picture so the picture

ﬁts the entire screen.

4:3: Sets the picture to the old, 4:3 format and puts black or gray

borders on the right and left of the picture.

✎Do not watch your T V in the 4:3 format for a long time.

The borders displayed on the left, right, and center of the

screen in 4:3 format may cause image retention (screen

burn) which is not covered by the warranty.

Screen Fit: Displays the full image without any cut-off when

your TV is inputting HDMI (720p / 1080i / 1080p) or Component

(1080i / 1080p) HD signals.

✎HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p

(1920x1080) or 720p (1280x720) resolution.

✎You can adjust and store settings for each external device you

have connected to an input on the TV. Picture Sizes available

by Input Source are listed below:

Custom: Magniﬁes or shrinks 16:9 pictures vertically and/or

horizontally. A magniﬁed or shrunk picture can be moved left,

right, up, and down.

Input Source Picture Size

ATV, AV, Component (480i, 480p) 16:9 Zoom1 Zoom2 ,,,

4:3

DTV (1080i, 1080p), Component (1080i,

1080p), HDMI (720p, 1080i, 1080p)

16:9 Wide Fit 4:3 , , ,

Screen Fit

■

Digital Clean View ( / Low / Medium / High / Auto) Off : If the

broadcast signal received by your TV is weak, you can activate

the feature to reduce any static and ghosting Digital Clean View

that may appear on the screen.

✎When the signal is weak, tr y all the Digital Clean View

options until the TV displays the best picture.

■

HDMI Black Level (Normal / Low) : For HDMI signals, select

the black level to adjust the screen depth. Low make blacks look

darker.

✎Available only in HDMI mode (RGB signals).

■

Film Mode ( / Auto1 / Auto2) Off : Sets the TV to automatically

sense and process ﬁlm signals from all sources and adjusts the

picture for optimum quality.

✎Available in AT V, DTV (interlace), AV, COMPONENT (480i /

1080i) and HDMI (480i / 1080i).

■

Motion Lighting ( / On)Off : When on, the TV automatically

dims the screen's backlights when full brightness is not

needed - for example when the TV is displaying dark scenes - to

reduce power consumption. The backlights are returned to full

brightness when the TV displays bright scenes.

Picture Off

The screen is turned off but the sound remains on. Press any button

except the power key or volume button to turn on the screen.

Other Features

Voice Guide (On/Off)

You can activate voice guides that describe the menu options aloud

to aid the visually impaired.

■

Voice Guide: Enable or disable the Voice Guide feature. Voice

Guide is provided in the current language.

■

Volume: Set the volume of the voice guide.

■

Pitch: Set the pitch of the voice guide.

■

Speed: Set the speed of the voice guide.

Game Mode (On/Off)

When you connect a game console such as a PlayStation™ or Xbox™

to your TV, you can enjoy a more realistic gaming experience by

turning on the function.Game Mode

✎Precautions and limitations for game mode:

xBefore you disconnect the game console and connect another

external device, set Game Mode to Off in the setup menu.

xIf you display the TV menu in Game Mode, the screen shakes

slightly.

✎

Game Mode is not available when the input source is set to TV.

✎

After connecting the game console, set Game Mode to On. You

may notice slightly reduced picture quality.

Program Rating Lock

The feature lets you block programs you've Program Rating Lock

determined are inappropriate for your children based on the program's

ratings. To access the feature and make any Program Rating Lock

changes, you must enter a PIN (personal identiﬁcation number). To

watch a blocked program, you must also enter the same PIN.

✎

Program Rating Lock is not available in HDMI or Component

mode.

✎The default PIN number of a new T V set is “0-0-0-0”. You can

set your own PIN using the Change PIN function.

How It Works

When you access the Menu functions for the Program Rating Lock

ﬁrst time, the PIN input screen appears. Enter 0-0-0-0. The PIN screen

closes and the Menu appears. Every time Program Rating Lock

you access the functions, the PIN screen will Program Rating Lock

appear and you must enter a PIN.

When the Rating Lock screen appears, select Program Rating Lock,

and then press . Select , and then press the ENTEREOn ENTERE

key again. Depending on what type of programs or movies you want

to block, select one of the options on the screen, and then press the

ENTERE button. The options are listed below:

■

TV Parental Guidelines: You can block TV programs based on

their ratings. This function allows you to control what your children

are watching.

■

MPAA Rating: You can block movies based on their MPAA ratings.

The Motion Picture Association of America (MPAA) has implemented

a rating system that provides parents or guardians with advanced

information on which ﬁlms are appropriate for children.

■

Canadian English: You can block TV programs based on their

Anglophone Canadian ratings.

■

Canadian French: You can block TV programs based on their

French Canadian ratings.

■

Downloadable U.S. Rating: You can use parental restriction

information while watching DTV channels.

Locking/Blocking Programs or Movies

You lock or block programs and/or movies in essentially the same way

for each option. Each option displays a grid or table. All the tables

have ratings listed on the left. The option TV Parental Guidelines

also has kinds of content listed across the top: : Lock all TV ratings. All

/ : Fantasy violence / : Violence / : Sexual situation / : Adult FV V S L

Language / : Sexually Suggestive Dialog.D

To lock/block movies or shows with certain ratings and/or kinds of

content, click the square next to the rating and/or under the kind of

content. A lock appears. To unlock/unblock, click the square again.

When you click a low rating, all the ratings above it will also display

locks. You can also Allow All or Lock All. When done, press the

RETURN button on your remote.

■

Change PIN Change PIN: Select and the Change PIN screen

appears. Choose any 4 digits for your PIN, and then enter

them in the Enter New PIN ﬁelds. Re-enter the same 4 digits

in the Conﬁrm New PIN ﬁelds. When the Change PIN screen

disappears, press the button. The TV has memorized your OK

new PIN.

✎If you forget the PIN, press the remote-control buttons in

the following sequence, which resets the pin to “0-0-0-0” :

POWER POWER (off) → MUTE 8 2 4 →→→→ (on)

Caption

(On-Screen Text Dialogue)

■

Caption: You can switch the caption function on or off. If

captions are not available, they will not be displayed on the

screen.

✎The feature does not work in or Caption Component

HDMI mode.

■

Caption Mode: You can select the desired caption mode.

Default / CC1~CC4 / Text1~Text4: (analog channels only) The

Analog Caption function operates in either analog TV channel

mode or when a signal is supplied from an external device to the

TV. (Depending on the broadcasting signal, the Analog Caption

function may or may not work with digital channels.)

Default / Service1~Service6 / CC1~CC4 / Text1~Text4:

(Digital channels only) The Digital Captions function works with

digital channels.

✎Service1~6 may not be available in digital caption mode

depending on the broadcast.

■

Digital Caption Options: (Digital channels only)

Size Default Small Standard Large Extra : Options include , , , , and

large Standard. The default is .

Font Style Default: Options include and Styles 0 to 7. The default

is Style 0.

Foreground Color Default White Black Red: Options include , , , ,

Green Blue Yellow Magenta Cyan, , , , and . You can change the

color of the letters. The default is .White

Background Color Default White Black Red: Options include , , , ,

Green Blue Yellow Magenta Cyan, , , , and . You can change the

background color of the captions. The default is .Black

Window Color Default White Black Red: Options include , , , ,

Green Blue Yellow Magenta Cyan Black, , , , . Default is .

Foreground Opacity: This adjusts the opacity of text. Options

include , Default Transparent Translucent Solid Flashing, , , and .

Background Opacity: This adjusts the opacity of the caption

background. Options include , Default Transparent Translucent, ,

Solid Flashing, and .

Window Opacity: This refers caption to window background, not

character background. Options include , Default Transparent,

Translucent Solid Flashing Transparent, , . Default is .

Edge Type No Edge Raised Depressed: Options include , , ,

Uniform Drop Shadow No Edge, . Default is .

Edge Color Default White Black Red Green: Options include , , , , ,

Blue Yellow Magenta Cyan White, , , . Default is .

Return to Default Size Font Style Foreground : This option sets , ,

Color Background Color Window Color Foreground Opacity, , , ,

Background Opacity Window Opacity Edge Type Edge , , , and

Color to its default.

✎Digital Caption Options are available only when you can

select and in Default Service1 ~ Service6 Caption Mode.

✎The Foreground and Background cannot be set to the

same color.

Figures and illustrations in this User Manual are provided for reference

only and may differ from actual product appearance. Product design and

speciﬁcations may be changed without notice.

IMPORTANT WARRANTY INFORMATION

REGARDING TELEVISION FORMAT VIEWING

✎See the warranty card for more information on warranty

terms.

Wide screen format LED Displays (with 16:9 aspect ratios, the

ratio of the screen width to height) are primarily designed to view

wide screen format full-motion video. The images displayed on

them should primarily be in the wide screen, 16:9 ratio format, or

expanded to ﬁll the screen, if your model offers this feature, with

the images constantly in motion. Displaying stationary graphics and

images on the screen, such as the dark sidebars on non-expanded

standard format television video and programming, should be limited

to no more than 5% of the total television viewing time per week.

Additionally, viewing other stationary images and text such as stock

market crawls, video game displays, station logos, web sites, or

computer graphics and patterns, should be limited as described

above for all televisions.

Displaying stationary images that exceed the above guidelines

can cause uneven aging of LED Displays that leave subtle, but

permanent burned-in ghost images in the LED picture. To avoid

this, vary the programming and images, and primarily display full

screen moving images, not stationary patterns or dark bars. On LED

models that offer picture sizing features, use these controls to view

different formats as a full screen picture.

Be careful about the television formats you select and the length of time you

view them. Uneven LED aging as a result of format selection and use, as well as

burned in images, are not covered by your Samsung limited warranty.

•SAMSUNGELECTRONICSNORTHAMERICANLIMITED

WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations

of the original Limited Warranty supplied with Samsung Electronics

(SAMSUNG) products, and the requirements, conditions, exclusions

and limitations contained herein, SAMSUNG will additionally

provide Warranty Repair Service in the United States on SAMSUNG

products purchased in Canada, and in Canada on SAMSUNG

products purchased in the United States, for the warranty period

originally speciﬁed, and to the Original Purchaser only.

The above described warranty repairs must be performed by a

SAMSUNG Authorized Service Center. Along with this Statement,

the Original Limited Warranty Statement and a dated Bill of Sale

as Proof of Purchase must be presented to the Service Center.

Transportation to and from the Service Center of TVs 40" or smaller

is the responsibility of the purchaser. Conditions covered are limited

only to manufacturing defects in material or workmanship, and only

those encountered in normal use of the product.

Exclusions include, but are not limited to, any originally speciﬁed

provisions for in-home or on-site services, minimum or maximum

repair times, exchanges or replacements, accessories, options,

upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please

call toll-free:

✎In the United States: 1-800-SAMSUNG (1-800-726-7864)

✎In Canada: 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture ﬁles) or still

image elements (such as TV channel logos, TV shows or movies

in panorama or 4:3 format, stock or news scroll bars, etc.) on the

screen. The constant display of still pictures can cause ghosting or

image burn-in (image retention) on the LED screen, which will affect

image quality. To reduce the risk of this effect, please follow the

recommendations below:

• Avoid displaying the same TV channel for long periods.

• Always try to display any image in full screen mode. Use the TV's

Picture Options menu to select the optimal screen size.

• Reduce brightness and contrast values to the minimum required

to achieve the desired picture quality. Values that exceed the

minimum may speed up the burn-in process.

• Frequently use all TV features designed to reduce image retention

and screen burn-in. Refer to proper user manual section for details.

LED TV

user manual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products,

please contact the SAMSUNG customer care center.

Country CANADA U.S.A

Address

Samsung Electronics Canada

Inc. 2050 Derry Road West

Mississauga, Ontario L5N

0B9 Canada

Samsung Electronics America,

Inc. 85 Challenger Road

Ridgeﬁeld Park, NJ 07660

Customer Care

Center 1-800-SAMSUNG (726-7864)

Web Site

www.samsung.com/ca/

support (English)

www.samsung.com/ca_fr/

support (French)

www.samsung.com/us/

support

accessibility contact information in U.S.A. : accessibility@sea.samsung.com

- 2 -- 1 -

- 6 -- 5 -

- 3 -

- 7 -

- 4 -

- 8 -

Boot Logo

Enable or disable the display of the Samsung logo when you turn

on the TV.

Eco Solution

■

Energy Saving ( / Low / Medium / High)Off : Lets you adjust

the brightness of the TV to reduce power consumption.

■

Eco Sensor (Off / On): To enhance your power savings the

picture settings will automatically adapt to the light in the room.

✎This function may not be available, depending on the model.

Min. Backlight: When Eco Sensor is On, you can adjust

the minimum screen brightness manually.

✎

If is Eco Sensor On, the display brightness may change

(become slightly darker in most cases) depending on the

surrounding light intensity.

■

No Signal Power Off ( / 15 min. / 30 min. / 60 min.)Off : Sets

how quickly the TV switches to standby mode, if no picture is

being received.

✎Disabled when an attached PC is in power saving mode.

■

Auto Power Off ( / On) Auto Power OffOff : When is set to

On, the TV will automatically turn off when no user operation is

detected for 4 hours.

Auto Protection Time

■

Auto Protection Time ( / 2 hours / 4 hours / 8 hours / 10 Off

hours): If the screen remains idle with a still image for a certain

period of time you deﬁne, the screen saver is activated to prevent

the formation of ghost images on the screen.

Input Menu

Source List

Use to select TV or other external input sources such as DVD / Blu-

ray players / cable box / STB satellite receiver connected to the TV.

1. Press the SOURCE button.

2. Select a desired external input source.

■

TV / AV / Component / HDMI1 / HDMI2/DVI

You can only choose external devices that are

connected to the TV. In the Source List, connected inputs are

highlighted.

How to use Edit Name

Edit Name lets you associate a device name to an input source,

making it easier to select a source. To access , enter the Edit Name

Input Edit Name menu, and then select . Select the name of the

device from the drop down next to the name of the input jack it is

connected to. For example, if your Blu-ray player is connected to

HDMI 2, select Blu-ray player from the drop down next to HDMI 2.

✎If you have connected a PC to the HDMI IN 2 (DVI) port with

an HDMI cable, you should select mode in .PC Edit Name

✎If you have connected a PC to the HDMI IN 2 (DVI) port with

an HDMI to DVI cable, you should select mode in DVI PC Edit

Name.

✎If you have connected an AV device to the HDMI IN 2 (DVI)

port with an HDMI to DVI cable, you should select mode DVI

in .Edit Name

Application Menu

Enjoy photos, music, and/or movie ﬁles saved on a

USB Mass Storage Class (MSC) device.

Connecting a USB Device

1. Turn on your TV.

2. Connect a USB device containing photo, music, and/or movie

ﬁles to the jack on the back of the TV. A pop up window USB

appears.

3. Press the MEDIA.P button on your remote. The Media Play

menu appears.

Using the Media Play Menu

USB

■

Change Device

Enter

Return

Media Play

Videos

To open in the Menu, follow these steps:Media Play

1. Press the MENU button. Then, press the or button to ▲ ▼

select on the left, and then press the Applications ENTER

button.

2. Media Play (USB)Press the or button to select ▲ ▼ , and then

press the ENTER

button.

3. Videos, Music, Press the or button to select an icon (◄ ►

Photos, Settings), and then press the ENTER

button.

✎

Media Play might not work properly with unlicensed

multimedia files.

✎Read the list below before using Media Play (USB)

The file system supports FAT16, FAT32, and NTFS.

xCertain types of USB Digital camera and audio devices may not

be compatible with this T V.

Media Play only supports USB Mass Storage Class (MSC)

devices. MSC is a Mass Storage Class Bulk-Only Transport

device. Examples of MSC are Thumb drives and Flash Card

Readers. Devices should be connected directly to the TV’s USB

port. USB HDD is not supported.

Before connecting your device to the TV, please back up your

files to prevent file damage or loss of data. SAMSUNG is not

responsible for any data file damage or data loss.

A USB device that requires high power (more than 0.5A) may not

be supported.

xDo not disconnect the USB device while it is loading.

xThe higher the resolution of the image, the longer it takes to

display on the screen.

xThe maximum supported JPEG resolution is 15360 x 8640 pixels.

xIf a ﬁle is corrupted or the TV does not support the ﬁle type, the

“Not Supported File Format” message appears.

xThe TV cannot play MP3 files with DRM that have been

downloaded from a for-pay site. Digital Rights Management

(DRM) is a technology that supports the creation, distribution,

and management of digital content in an integrated and

comprehensive way, including protecting the rights and interests

of content providers, preventing illegal copying of contents, and

managing billing and settlements.

xPTP (Pier to Pier) devices are not supported.

If an over-power warning message is displayed while you are

connecting or using a USB device, the device may not be

recognized or may malfunction.

-00

Produktspecifikationer

Varumärke:	Samsung
Kategori:	Tv
Modell:	UN32J5003EF
Färg på produkten:	Zwart
Vikt:	40000 g
Bredd:	1250 mm
Djup:	150 mm
Höjd:	721 mm
Skärm diagonal:	55 "
Upplösning:	1920 x 1080 Pixels
Betraktningsvinkel, horisontell:	178 °
Betraktningsvinkel, vertikal:	178 °
Typiskt kontrastförhållande:	3000:1
Ljusstyrka:	500 cd/m²
Antal HDMI-portar:	1
Kompositvideoingång:	1
Komponenter för video (YPbPr/YCbCr):	1
S-videoingång:	1
Monteringsalternativ för kabellås:	Nee
Strömförbrukning (i standby):	2 W
Hörlursutgångar:	1
Display, antal färger:	16.78 miljoen kleuren
HDCP:	Ja
HD typ:	Full HD
Ljudingångar:	Ja
Ljudutgång:	Ja
Respons tid:	8 ms
Panelmonteringsgränssnitt:	400 x 400 mm
DVI-D-portar:	1
Bildförhållande:	16:9
Digital horisontell frekvens:	31.5 - 91.1 kHz
Digital vertikal frekvens:	50 - 85 Hz
Integrerad TV-tuner:	Nee
Inbyggd kamera:	Nee
Antal DisplayPorts:	1
Produktdesign:	Digitale signage flatscreen
Strömförbrukning (typiskt):	280 W