Sandia Sniper 80-6001 Bruksanvisning
                    Sandia
                    
                    dammsugare
                    
                    Sniper 80-6001
                
                                
    Läs gratis den bruksanvisning för Sandia Sniper 80-6001 (12 sidor) i kategorin dammsugare. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 6 recensioner. Har du en fråga om Sandia Sniper 80-6001 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
                        Sida 1/12
                    
                    
                    
Safety, Operation and Maintenance           
Manual with Parts List
Please read before use!
500 PSI, Dual 2-Stage and 3-Stage MotoRS
Heated and Non-Heated Units
SNIPER 12-Gallon Carpet Extractor
Heated and Non-Heated Units
Copyright © 2016 Ultimate Solutions | Sandia Products
ACTIVATE 
YOUR 
WARRANTY!
Important Information and Safety Instructions
Register your Machine Online or Return your Machine Warranty Card!
Serial No:                                                         
Another Innovative 
Product from
Manufactured with
Pride in the U.S.A.
Make a copy of this card for future reference.
Copyright © 2016 Ultimate Solutions | Sandia Products. All Rights Reserved.
Ultimate Solutions Corporate Oce
15571 Container Lane, Huntington Beach, CA 92649
Phone: 800-983-5834  |  Fax: 714-901-8404
www.us-group.com  |  www.sandiaplastics.com
New Equipment Warranty
Limited Warranty
Sandia  Products  warrants  new  equipment  against  defects  in  material  and 
workmanship under normal use and service to the original purchaser. Any statutory 
implied  warranties,  including  any  warranty  of  merchantability  or  tness  for  a 
particular purpose,  are  expressly  limited to  the  duration  of  this  written  warranty. 
Sandia Products will not be liable for any other damages, including but not limited 
to indirect or special consequential damages arising out of or in connection with the 
furnishing, performance, use or inability to use the machine. This remedy shall be the 
exclusive remedy of the purchaser. The warranty period is subject to the conditions 
stated below.
Lifetime Warranty on Body, 2-Years on Vacuum Motors, 1-Year on 
500 PSI Pump, 90-Days on Tools and Accessories
Sandia Products warrants the roto-molded body to be free from defects in material 
and  workmanship,  under  normal  use  and  service  for  a  lifetime.  Sandia  Products 
warrants the motors to be free from defects in material  and workmanship, under 
normal use and service for two (2) years from the original date of sale and the pump 
and the electrical parts for one (1) year. Parts replaced or repaired under this warranty 
are  warranted  for  the  remainder  of  the  original  warranty  period.  Service  labor 
charges are covered for one (1) year from the date of purchase, when performed by 
a manufacturer-authorized service provider. 
Labor  is  only  provided  by  authorized  service  centers.    If  an  authorized  service 
center is not near you, it is the purchaser’s responsibility to take their machine to an 
authorized service center.
Normal wear items such as capacitors, cords, nishes or switches will be warranted 
for manufacturing defects for ninety (90) days from the purchase date.
All warranties of motors and associated components will be voided: if the machine 
is serviced by anyone other than an authorized service provider; if the machine is 
mechanically modied; if the machine is operated when not operating properly; or if 
the machine is misused or abused.
The  warranty  starts  on  the  purchase  date  by  the  original  purchaser  from  Sandia 
Products  subject  to  proof  of  purchase.  The  Machine  Registration  Card  must  be 
completed  and  returned  immediately  at  the  time  of  purchase.  Registration  may 
also be performed online at: www.sandiaplastics.com/registration.aspx. If proof of 
purchase cannot be identied, the warranty start date is ninety (90) days after the 
inventory stocking date at the distributor’s warehouse.
Models:
80-2500
80-2500-H
80-3500
80-3500-H
Produktspecifikationer
| Varumärke: | Sandia | 
| Kategori: | dammsugare | 
| Modell: | Sniper 80-6001 | 
Behöver du hjälp?
Om du behöver hjälp med Sandia Sniper 80-6001 ställ en fråga nedan och andra användare kommer att svara dig
dammsugare Sandia Manualer
                        
                         3 September 2024
                        
                    
                                                            
                        
                         1 September 2024
                        
                    
                                                            dammsugare Manualer
- Midea
- Hoover
- Bimar
- Ronix
- Kobold
- Kranzle
- Bissel
- Sinbo
- Ghibli & Wirbel
- Valet
- Fagor
- Altus
- Tesla
- Beam
- Nedis
Nyaste dammsugare Manualer
                        
                         21 Oktober 2025
                        
                    
                                                            
                        
                         21 Oktober 2025
                        
                    
                                                            
                        
                         21 Oktober 2025
                        
                    
                                                            
                        
                         20 Oktober 2025
                        
                    
                                                            
                        
                         20 Oktober 2025
                        
                    
                                                            
                        
                         19 Oktober 2025
                        
                    
                                                            
                        
                         18 Oktober 2025
                        
                    
                                                            
                        
                         17 Oktober 2025
                        
                    
                                                            
                        
                         16 Oktober 2025
                        
                    
                                                            
                        
                         15 Oktober 2025