Satel Graphite Bruksanvisning

Satel Rörelsedetektor Graphite

Läs gratis den bruksanvisning för Satel Graphite (4 sidor) i kategorin Rörelsedetektor. Guiden har ansetts hjälpsam av 30 personer och har ett genomsnittsbetyg på 3.6 stjärnor baserat på 15.5 recensioner. Har du en fråga om Satel Graphite eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/4

GRAPHITE

DIGITAL PASSIVE INFRARED DETECTOR

graphite_en 01/15

The GRAPHITE detector allows detection of motion in the protected area. This manual applies to the detector

with electronics version H (or newer).

1. Features

 Dual element pyrosensor.

 Digital motion detection algorithm.

 Digital temperature compensation.

 Adjustable detection sensitivity.

 Built-in EOL resistors.

 LED to indicate alarm status.

 Remote LED enable/disable.

 Alarm memory.

 Supervision of detector signal path and supply voltage.

 Tamper protection against cover removal.

2. Specifications

Supply voltage ...................................................................................................................................12 V DC ±15%

Standby current consumption......................................................................................................................... 12 mA

Maximum current consumption ...................................................................................................................... 14 mA

EOL resistors ............................................................................................................................................ 2 x 1.1 k

Relay contacts rati .....40 mA / 16 V DC ng (resistive load).........................................................................................

Detectable speed......................................................................................................................................0.3...3 m/s

Alarm signaling period .......................................................................................................................................... 2 s

Warm-up period.................................................................................................................................................. 30 s

Recommended installation height ....................................................................................................................2.4 m

Security grade according to EN50131-2-2 ...................................................................................................Grade 2

Standards complied with ........................................................ EN50131-1, EN50131-2-2, EN50130-4, EN50130-5

Environmental class according to EN50130-5 ........................................................................................................II

Operating temperature range ................................................................................................................ -30...+55 °C

Maximum humidity..........................................................................................................................................93±3%

Dimensions ..................................................................................................................................... 63 x 96 x 49 mm

Weight.................................................................................................................................................................94 g

3. Description

After motion is sensed by the detector y contacts will open for 2 seconds. in the coverage area, the alarm rela

Supervision features

In the event of the voltage drop below 9 V (± 5%) for more than 2 seconds or the signal path failure, the detector