Sauter TN 80-0.1US Bruksanvisning

Sauter Mätutrustning TN 80-0.1US

Läs gratis den bruksanvisning för Sauter TN 80-0.1US (19 sidor) i kategorin Mätutrustning. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 7 recensioner. Har du en fråga om Sauter TN 80-0.1US eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/19

Sauter GmbH

Ziegelei 1

D-72336 Balingen

e-mail: info@kern-sohn.com

Phone : +49-[0]7433- 9933-0

Fax: +49-[0]7433- - 9933 149

Internet: www.sauter.eu

Instruction Manual Ultrasonic Material

Thickness Gauge

SAUTER -TN US

Version 2.0

04/2020

TN_US- -e-2020 BA

PROFESSIONAL MEASURING

TN_US- -e-2020 2 BA

SAUTER -TN US

V. 2.0 04/2020

Instruction Manual Ultrasonic Material Thickness

Gauge

Congratulations on the purchase of an ultrasonic material thickness gauge from

SAUTER. We hope you will enjoy your quality measuring device with its wide range of

functions.

For questions, wishes or suggestions we are at your disposal.

Table of contents:

1. General overview ........................................................................................... 4

1.1 Technical data ........................................................................................................................... 4

1.2 General functions ..................................................................................................................... 5

1.3 Measuring principle .................................................................................................................. 5

1.4 Equipment ................................................................................................................................. 6

2. Design features .............................................................................................. 7

2.1 Digital display ........................................................................................................................... 7

2.2 Description of the control panel ............................................................................................. 8

3. Preparation for commissioning .................................................................... 8

3.1 Selection of the sound generator ........................................................................................... 8

3.2 Conditions and preparations for surfaces ........................................................................... 10

4. Mode of operation ........................................................................................ 11

4.1 Switching on and o .............................................................................................................. 11

4.2 Sound generator setting (zero setting) ................................................................................ 11

4.3 Sound velocity ........................................................................................................................ 11

4.4 Measurements are made ....................................................................................................... 13

4.5 The ultrasound image mode ( scan mode) .......................................................................... 14

4.6 Change the resolution ............................................................................................................ 14

4.7 Changing the units ................................................................................................................. 15

4.8 Storage management ............................................................................................................. 15

4.9 "Beep" mode ........................................................................................................................... 16

4.10 EL Backlight ............................................................................................................................ 16

4.11 Battery information ................................................................................................................ 16

4.12 Automatic switch- off .............................................................................................................. 16

4.13 Basic setting of the system (Reset) ...................................................................................... 16

4.14 Connection to PC ................................................................................................................... 16

5. Maintenance ................................................................................................. 17

6. Transport and storage ................................................................................. 17

7. Sound velocities .......................................................................................... 17

8. The measurement of tubes and hose material .......................................... 18

9. Measuring hot surfaces ............................................................................... 18

3 TN_US- -e-2020 BA

10. Measuring coated materials ........................................................................ 18

11. 19 Material suitability ........................................................................................

12. Coupling means ........................................................................................... 19

Produktspecifikationer

Varumärke:	Sauter
Kategori:	Mätutrustning
Modell:	TN 80-0.1US
Färg på produkten:	Grijs
Bredd:	- mm
Djup:	- mm
Höjd:	- mm
Rekommenderad ålder (min):	15 jaar
Material:	Metaal
Antal per paket:	1 stuk(s)
Varumärkeskompatibilitet:	Märklin
Längd:	393 mm
Föreslaget kön:	Elk geslacht
Typ produkt:	Goederenwagen
EU TSD-varning:	Not for children under the age of 15
Maträtt:	HO (1:87)